Toro 04043, 04042 Specifications
Greensmaster® eFlex® 1800 & 2100
The Greensmaster eFlex, available in both 18 and 21 inch cutting widths, takes Toro’s industry leading cutting performance
to a whole new level. Game-changing Lithium Ion battery technology combined with Toro innovations for improved cutting
performance, allow you to quietly mow up to 9 average greens (45,000 sq. feet) on a single charge! Additional innovations
in the areas of productivity, operational versatility and serviceability combine to provide a more environmentally friendly
“EnergySmart™” solution and ROI.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
40
POWER
ELECTRIC MOTOR
BATTERY CHARGER
TRANSMISSION
MAINTENANCE
GROUND SPEED
TRACTION DRUM
CONTROLS
HANDLE
TRANSPORT TIRES/KICKSTAND
REEL CONSTRUCTION
SUSPENSION
WIDTH OF CUT
HEIGHT OF CUT
CLIP FREQUENCIES
REEL DRIVE
CUTTING UNIT CONSTRUCTION
CUTTING UNIT ADJUST./SERVICE
BEDKNIFE
GRASS BASKET
ROLLERS
WORKING WEIGHT
CERTIFICATION /WARRANTY
Greensmaster® eFlex® 1800 & 2100 Specifications*
GREENSMASTER eFLEX 1800, MODEL 04043 GREENSMASTER eFLEX 2100, MODEL 04042
Lithium-Ion battery pack – nominal 53-Volt 35 A-Hr (42 – 64 volt, 1.68 kW-hr) with integrated battery management system utilizing CAN communication with the
machine controller and charger. Single battery affixed to unit and charged onboard.
Brushless permanent magnet DC motor – nominal 1.2 kW (~20A continuous, 30A peak) with integral motor controller and helical gear reduction.
Voltage and current controlled with CAN communication to manage storage wake-up and maintenance features. Complies to max voltage and current limits directed
by the battery management system.
Permanent Magnet DC motor directly coupled to the first stage of a multi-ribbed poly-V belt drive. The traction drums are belt driven through a spur gear planetary
differential with integral band style service/parking brake.
No grease zerks, sealed bearing design reduces daily maintenance.
Mowing speed: 0.9-3.7 mph (1.4-5.9 km/h). Transport speed (maximum): 5.7 mph (9.2 km/h).
Dual cast aluminum 7.5” (19 cm) diameter with taper on outer 2” (5 cm).
Start/On/Off (‘ignition’) switch, LCD Information Center (reports multiple parameters including hours, battery life, faults, etc.) throttle, dual function traction/reel
control lever, operator presence control, on/off ‘EZ-Turn’ switch, service/park brake lever, on/off light switch (optional blank slot in console).
Loop style, molded contour upper, 1” (2.5 cm) diameter lower tube. Two angular adjustments and lift assist on kickstand with 2.0 inches of telescoping adjustment.
Quick detachable 3.00/3.25 x 6 pneumatic. Lift assist kickstand standard equipment. Loop style with service position lock, 1” (2.5 cm) diameter tube.
8-Blade Reel: 5” (12.7 cm) diameter, 8 high carbon steel blades welded to 5 steel spiders (no 8-blade, 18” available). 11-Blade Reel: 5” (12.7 cm) diameter,
11 high carbon steel blades welded to 5 steel spiders. 14-Blade Reel: 5” (12.7 cm) diameter, 14 high carbon steel blades welded to 5 steel spiders.
Semi-floating cutting unit separable from drive unit, pivoting around reel centerline (pitch axis) and pivoting around bedknife centerline side to side (roll axis).
18" (45.7 cm) 21" (53.3 cm)
Front roller adjustable with 2 position rear roller: 1st position (spacer on top) 1/16” - 5/32” (1.59 – 3.97 mm). 2nd position (spacer below) 1/8” - 19/64” (3.17 – 7.54 mm)
Reel drive consists of three pulleys of different diameter. 6-clip adjustments per reel, based on pulley configuration.
Transmission reel clutch shaft to a drive shaft with a pair of beam style couplers.
Machined cast aluminum frame.
Cutting unit detachable from traction unit. Dual screw “click” adjustments to reel. Front roller height of cut adjustment. Sealed stainless steel reel bearings.
Bedknife is high carbon through-hardened steel. EdgeMaxTM Microcut Bedknife is standard on 11 & 14-blade cutting unit. EdgeMax bedknife is solid tool steel.
Molded polyethylene with integrated graphics highlighting overlap guidelines, vented for high-efficiency collection.
Front Roller: Optional – must be ordered. Rear Roller: Aluminum full roller 2” (5.1 cm) diameter with sealed bearings.
285 lbs. (129 kg) w/basket, w/o transport tires and groomer. 293 lbs. (133 kg) w/basket, w/o transport tires and groomer.
Designed in accrdance to ANSI/CE/WEEE/ROHS/C-TICK. Two-year limited warranty. Years 3-5 prorated warranty on Lithium-Ion Battery. Refer to the Operator’s Manual for further details.
CUTTING UNITS & REEL OPTIONS
04254 14-Blade DPA Cutting Unit
04253 11-Blade DPA Cutting Unit
119-4102 14-Blade Reel
119-4101 11-Blade Reel
STANDARD CUTTING UNIT EQUIPMENT
110-2282-01
117-1530 EdgeMax
Less Aggressive Bedbar
TM
Microcut Bedknife
04259
04260
04263 Groomer Reel, Carbide (18")
04743 Thin Blade Grooming Reel (18" )
04264 Grooming Brush (18”)
127-6119 Groomer Quick Up Kit (w/o groomer)
04272 Greens Perfection Brush (18") – Soft
04273 Greens Perfection Brush (18") – Stiff
BEDKNIFE & BEDBAR OPTIONS
98-7260 Tournament Bedknife
110-2301 Low Cut Bedknife
110-2300 Extended Microcut Bedknife
98-7261 Microcut Bedknife
117-1532
117-1530 EdgeMax
120-9600 High Height of Cut Kit
110-2281-03
94-9010 Height of Cut Adjustment Bar
TM
EdgeMax
Tournament Bedknife
TM
Microcut Bedknife
Aggressive Bedbar
ROLLER OPTIONS
120-9607 Front Narrow Wiehle Roller
120-9609 Front Wide Wiehle Roller
120-9611 Front Full Steel Roller (2.5” dia.)
115-7361 Front Roller Extension Kit
121-4680 Front Full Extended Width Roller
121-4681 Front Extended Wiehle Roller
125-3537 Extended Rear Roller Kit
120-9602 Rear Roller Adjustment Kit
121-4682 Rear Full Roller – Steel
115-7361 Auxiliary Roller Kit
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in design, required attachments and safety features. Consult your local Toro Distributor.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 1/15
120-9615 Narrow Wiehle Roller Scraper
120-9616 Wide Wiehle Roller Scraper
120-9617 Full Roller Scraper
120-9621
120-9622
120-9623 Full Roller Scraper Brush
120-9624
120-9625
120-9626 Full Roller Scraper Comb
120-9627 Scraper Kit with Rear Roller
04265 LED Light Kit
04266 Push Broom Brush
04123 Wheel Kit
04399 Turf Evaluator
04399 Turf Evaluator
125-5610 Paper – Reel
125-5611 Shim – Reel
94-9010 Heigh of Cut Bar Assembly
GROOMER OPTIONS
Flex Groomer Drive, Fwd Rotating
Flex Groomer Drive, Counter Rotating
SCRAPER OPTIONS
Narrow Wiehle Roller Scraper Brush
Wide Wiehle Roller Scraper Brush
Narrow Wiehle Roller Scraper Comb
Wide Wiehle Roller Scraper Comb
TRACTION UNIT ACCESSORIES
TOOLS
41
GREENSMASTER eFLEX 2100 ACCESSORIESGREENSMASTER eFLEX 1800 ACCESSORIES
CUTTING UNITS & REEL OPTIONS
04251 11-Blade DPA Cutting Unit
04252 14-Blade DPA Cutting Unit
119-4105 14-Blade Reel
119-4104 11-Blade Reel
119-4103 8-Blade Reel
STANDARD CUTTING UNIT EQUIPMENT
115-1880 EdgeMaxTM Microcut Bedknife
106-2648-01
93-4263 Tournament Bedknife
93-4264 Low Cut Bedknife
108-4303 Extended Microcut Bedknife
93-4262 Microcut Bedknife
108-4302
115-1881
120-9600 High Height of Cut Kit
99-3794-03
94-9010 Height of Cut Adjustment Bar
04265 LED Light Kit
04266 Push Broom Brush
04123 Wheel Kit
04399 Turf Evaluator
04399 Turf Evaluator
125-5610 Paper – Reel
125-5611 Shim – Reel
94-9010 Heigh of Cut Bar Assembly
The Greensmaster eFlex 1800 & 2100
are manufactured in Tomah, WI ISO 9002
Certified Plant.
Less Aggressive Bed Bar
BEDKNIFE & BEDBAR OPTIONS
Extended Tournament Bedknife
TM
EdgeMax
Tournament Bedknife
Aggressive Bedbar
TRACTION UNIT ACCESSORIES
TOOLS
04255 Front Narrow Wiehle Roller
04256 Front Wide Wiehle Roller
04250 Split Narrow Wiehle Roller
107-3514 Front Wide Wiehle Roller – Steel
04257 Front Full Roller
04249 Split Full Front Roller
04258
04267
115-7356 Rear Full Roller – Aluminum
120-9595 Rear Full Roller – Steel
115-7361 Front Roller Extension Kit
120-9602 Rear Roller Adjustment Kit
Long Front Narrow Wiehle Roller
Paspalum Roller
GROOMER OPTIONS
ROLLER OPTIONS
04259
04260
04711 Groomer Reel, Carbide (RH)
04712
04744
04713 Grooming Brush
127-6119 Groomer Quick Up Kit (w/o groomer)
04708 Groomer Reel, Carbide (21", LH)
04274 Greens Perfection Brush (21") – Soft
04275 Greens Perfection Brush (21") – Stiff
Flex Groomer Drive, Fwd Rotating
Flex Groomer Drive, Counter Rotating
Groomer Reel, Spring Steel (RH)
Thin Blade Grooming Reel (21")
SCRAPER OPTIONS
125-3503 Narrow Wiehle Roller Scraper
125-3504 Wide Wiehle Roller Scraper
125-3505 Full Roller Scraper
115-7377
115-7378
115-7379 Full Roller Scraper Brush
115-7380
115-7381
115-7382 Full Roller Scraper Comb
115-7383 Rear Roller Scraper
Narrow Wiehle Roller Scraper Brush
Wide Wiehle Roller Scraper Brush
Narrow Wiehle Roller Scraper Comb
Wide Wiehle Roller Scraper Comb
Loading...