Toro 03910 Sell Sheet

FEATURES

Reelmaster® 3550-D

• Lightweight Design – With a weight
that is on average 15-20 percent lighter
then comparably equipped machines,
the Reelmaster 3550-D provides the
ideal combination of turf friendliness
and productive performance.

• Productivity – The 82” (2.1 m) cutting
width and 7 mph (11.3 km/hr) mowing
speed make the 3550-D fast and effective.
Smooth, turf-friendly tires and 3-wheel
drive produce consistency and reliability.

• Superior Traction – The patented Series/
Parallel 3-wheel drive system provides
power to at least two wheels at all times.
The result is impressive traction in hilly
and wet conditions, and minimal wheel
slip so it’s gentle on the turf.

• Enhanced Ground Following –
18” (46 cm) version of fairway DPA cutting
units to better handle fairway undulations.
22” (56 cm) rear cutting units can be
installed to achieve additional overlap
if desired.

The new lightweight
fairway champion.

The Toro® Reelmaster® 3550-D floats effortlessly over contours in fairways

and green surrounds. With a productive 82” (2.1m) cutting width, turf-

friendly tires, the superior traction of a Series/Parallel 3-wheel drive system,

and a weight of less than 2,000 pounds*, the

Reelmaster 3550-D is engineered

to make a big impression...

without leaving one.

• Powerful Engine – Powered by
a 24.8 hp (18.5 kW) Kubota diesel
engine, the Reelmaster 3550-D
provides plenty of power to
climb hills, even while running
groomers and rear roller
brushes.

• Dual Precision Adjustment
(DPA) Cutting Units –
Precision machined cutting
units maintain levelness and
hold adjustments. DPA allows quick
bedknife to reel adjustment.

©2013 The Toro Company
8111 Lyndale Ave. S.
Bloomington, MN 55420-1196
Printed in the U.S.A.
Part No. 13-070-T Rev. 2/13

* Gross vehicle weight for standard configuration,

including five 18 inch (46 cm) cutting units, with
no optional accessories.

Call your Toro distributor at 1-800-803-8676

Reelmaster® 3550-D Specifications*

ENGINE

LUBRICATION

FUEL FILTER

COOLING

FUEL TANK CAPACITY

TRACTION DRIVE

GROUND SPEED

TIRES

MAIN FRAME

BRAKES

STEERING

GAUGES

CONTROLS

ELECTRICAL &

INTERLOCKS

REEL DRIVE

DIMENSIONS

WEIGHT

SAFETY

CERTIFICATION

WARRANTY

Kubota® 3-cylinder, liquid-cooled diesel engine. 24.8 hp (18.5 kW) @ 3000 RPM. Engine governed to 3220 RPM high idle (± 50 RPM), 1400 RPM low idle
(± 50 RPM). Displacement: 68.5 cu.in. (1123 cc). Peak torque: 57.2 lbs-ft @ 2200 RPM.

Pressurized lubrication system with 3.5 quarts (3.3 liters) capacity.

10 micron spin-on filter with integral water separator.

Aluminum side-by-side oil cooler/radiator. 8.5 fins per inch, wavy fin, non-louvered. 5.25 quart (4.9 liter) capacity.

7.5 gallons (28.3 liters), diesel fuel.

Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport. Hydrostatic traction drive provides infinitely variable speed in
forward and reverse. 6 gallon (23 liter) hydraulic system capacity.

0-10 mph (0-16.1 km/hr) forward transport; 0-7mph (0-11.3 km/hr) mow; 0-3.5 mph (5.6 km/hr) reverse.

Three (3) 22x12-12, 4-ply, no tread tires. 12 PSI recommended pressure.

Formed steel, welded steel and steel tubing.

Hydrostatic service brake. Hand-operated parking brake.

Power steering with tilt steering wheel.

Hour meter, fuel gauge, diagnostic lamp, cluster gauge with glow plug and charge indicator lights, and low engine oil pressure and high coolant temperature
warning lights (high temperature safety shut off).

Foot operated controls: Forward and reverse traction pedal, mow/transport speed limiter. Hand operated on control panel: Parking brake lever, ignition switch, engine throttle lever,
work light switch, on/off switch for cutting units, joystick for cutting unit lift and lower. Other controls: Steering wheel tilt control, reel speed control, backlap engagement lever.

Heavy-duty 12 V battery, 570 CCA; 40 amp alternator/regulator. Electronic control unit is microprocessor based, solid state control unit with diagnostic capabilities.
Traction pedal neutral, parking brake, operator presence in seat, and cutting unit engage/disengage safety interlock switches.

Hydraulic, open loop through oil cooler & filter. High efficiency pressure balanced gear type motors and pumps.

Mechanical suspension standard.

SEAT

Height: 74" (188 cm) Length: 110” (279.4 cm) Wheelbase: 59.5” (151.1 cm) Operational Width: 94” (238.8 cm) Transport Width: 91” (213.1 cm)

1,985 lbs. (900.38 kg) with (5) 18" 8-blade cutting units.

ROPS Standard. Capable of traversing a 25° slope in any direction on dry grass, while mowing.

Complies with ANSI B24.9-2012 and CE requirements.

Two-year limited warranty. Refer to the Operator’s Manual for further details.

REELMASTER 3550-D, MODEL 03910

18" CUTTING UNITS: 03911 (8-BLADE) & 03912 (11-BLADE) 22" CUTTING UNIT: 03913 (8-BLADE)

Five hydraulically driven, balanced, DPA cutting Units. Frame precision manufactured, die-cast aluminum for increased strength, simple click adjustment maintenance.

TYPE

18" (46 cm) wide, 5" (12.7 cm) diameter. Optional 22" (56 cm) wide, 5" (12.7 cm) diameter for the rear positions to increase overlap.

SIZE

WIDTH OF CUT

HOC RANGE

REEL SPEED

BEDKNIFE ADJUSTMENT

ROLLERS

GRASS BASKETS

CUTTING UNIT OPTIONS

03911 18" (46 cm) 8-Blade DPA Cutting Unit

03912 18" (46cm) 11-Blade DPA Cutting Unit

03913 22" (56 cm) 8-Blade DPA Cutting Unit

BEDKNIFE OPTIONS

121-3165 EdgeMax™ (18")

108-9095 EdgeMax™ (22")

125-2770 EdgeMax™ Low cut (18")

125-2771 EdgeMax™ Low cut (22")

121-3166 Standard (18")

108-9096 Standard (22")

121-3167 Standard Low Cut (18")

110-4084 Standard Low Cut (22")

82" (2.1 m)

8-Blade (18”) recommended range 0.5” – 1.0” (13 mm-25 mm). 11-Blade (18”) recommended range 0.25” – 0.75” (6 mm – 19 mm). 8-Blade (22”) recommended
range 0.5” – 1.0” (13 mm-25 mm). High HOC Kit available as an option to increase height of cut range from: 1.0” – 1.5” (25 mm – 38mm).

2350 (+/- 150) rpm max reel speed at highest setting. 200 rpm max at low idle and lowest setting for backlapping.

Precision machined cutting units maintain levelness and hold adjustments. Dual Precision Adjustment (DPA) allows quick bedknife to reel adjustment.

Wiehle front roller and standard rear roller included. Optional front full and shoulder rollers, and longer rear rollers available.

Optional 18" (46 cm) or 22" (56 cm) baskets.

18" (46 CM) DPA CUTTING UNIT ACCESSORIES

03919 Grass Basket Kit

03921 Extended Front Grass Basket Kit

120-9986 Rear Roller Scraper Kit

121-3182-03 Wiehle Roller Scraper

121-6995 Comb/Scraper Kit

110-9600 High HOC Kit

121-3199 High HOC Brush (for 18" RRB kits)

112-1732 Full Front Roller

121-6996-03 Full Front Roller Scraper

112-1728 Long Rear Roller Asm

112-1733 Shoulder Roller Asm

121-6970-03 Shoulder Roller Scraper

TRACTION UNIT ACCESSORIES

30358 Bimini Canvas Sunshade

115-4754 myTurf

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

®

Wireless Hour Meter Assembly

22" (56 CM) DPA CUTTING UNIT ACCESSORIES

03920 Grass Basket Kit

107-3280 Rear Roller Scraper Kit

107-2993-03 Wiehle Roller Scraper

110-1735 Comb/Scraper Kit

114-5412 Full Front Roller

110-9602-03 Full Front Roller Scraper

114-5404 Long Rear Roller Asm

114-5421 Shoulder Roller Asm

110-9609-03 Shoulder Roller Scraper

110-9600 High HOC Kit

GROOMER AND REAR ROTATING BRUSH OPTIONS

03914 DPA Groomer (LH) (18") - 3 required

03915 DPA Groomer (RH) (18") - 2 required

03916 Rear Roller Brush ONLY Kit (18")

03917

03918

119-9176 Broomer Kit (For 18" Groomers)

Rear Roller Brush (for Groomer Kit) (18")

Rear Roller Brush Kit (3 - 18") & (2 - 22")