Page 1
Reelmaster® 3550-D
Light in Weight,
Heavy in Productivity.
Page 2
Making a big impression...
without leaving one.
The Toro Reelmaster 3550-D floats effortlessly
over contours in fairways and green surrounds.
With a productive 82-inch cutting width, turffriendly tires, the superior traction of a Series/
Parallel 3-wheel drive system, and a weight of
less than 2,000 pounds, the Reelmaster 3550-D
is engineered to make a big impression on your
operation, without leaving one on your turf.
Page 3
Lightweight
Introducing the
Lightweight Champion
The Reelmaster 3550-D is the industry’s lightest
fairway mower. Entering the ring at under 2,000
pounds, it is on average 15-20% lighter than its
competitors. The lightweight design, coupled
with the smooth, turf-friendly tires, deliver a
gentle footprint for use on delicate turf.
Weight in base configuration
3000
2500
2000
1500
1,985 lbs.
Pounds
1000
500
0
Reelmaster 3550-D Competition*
up to
2,600 lbs.
* Comparably equipped
Less Weight Equals Reduced
Soil Compaction
Compaction reduces soil pore space, which reduces air and
water content, gas exchange, drainage and rooting. Less
compaction means healthier turf.
H
2
O
2
O
2
H
2
O
2
H
2
H
2
O
2
CO
CO
CO
2
2
CO
2
2
CO
CO
CO
2
2
CO
2
2
Page 4
Ground Following / Versatility
Enhanced Ground Following
Versatility
Whether you are mowing large fairway
expanses, tight green surrounds or challenging
bunker slopes, the Reelmaster 3550-D can be
configured in a way that will provide you with
the high quality finish you want.
Configuration A
• Five 18-inch 8-Blade cutting units
• 18-inch 8-blade cutting units are recommended
for heights-of-cut between
• Five 18-inch cutting units are ideal for primarily
straight-line mowing in fairway and approach
applications.
Configuration B
• Five 18-inch 11-Blade cutting units
• 18-inch 11-Blade cutting units are
recommended for heights-of-cut between
1
/4 and 3/4 of an inch.
• Five 18-inch cutting units are ideal for primarily
straight-line mowing in fairway and approach
applications.
1
/2 and 11/2-inches.
Designed to fit your needs
With smaller 18-inch versions of Toro’s proven DPA cutting units, the
Reelmaster 3550-D is able to provide the quality-of-cut Toro is known
for, even in those hard to maintain areas on your course.
Optional 22-inch rear cutting units can be installed
to provide additional overlap for applications
where competitors often fall short.
Configuration C
• Three 18-inch 8-Blade cutting units (front)
• Two 22-inch 8-Blade cutting units (rear)
• 8-blade cutting units are recommended for
heights-of-cut between
• 22-inch cutting units in the two rear positions
provide additional overlap and minimize the
potential for uncut strips of grass at higher
cutting heights, on slopes, or during tight turns.
Although less common, Configuration C can be replicated
with 11-blade cutting units upon request.
1
/2 and 11/2-inches.
Page 5
Features that make the Reelmaster
3550-D even more productive
Productivity
More Productive.
Cover nearly 40% more ground than a
standard triplex greens mower without
giving up the quality-of-cut you have come
to expect. The Reelmaster 3550-D offers
a wider width-of-cut with five, 18-inch
cutting units that provide even better
ground following capabilities than a
smaller, less productive mower.
Mow Faster.
An extra 2 mph of mowing speed
compared to a typical triplex can
translate into major cost savings and
increased productivity. This means you
can get more done without sacrificing
after-cut appearance.
“The new Reelmaster 3550-D fairway units are simply phenomenal. Quality of
cut, grooming ability, speed and very operator friendly controls are just a few of
the features that raise this new unit ‘off the charts.‘ Growing bentgrass fairways
in Southeastern Virginia is a tall order, no doubt. The Reelmaster 3550-D assists
superintendents in trying to produce the impossible: Tour quality fairways on a
low budget in today’s market. This product is truly a home run!!!”
-Steven P. Geller, Superintendent, Cahoon Plantation, Chesapeake, VA
Surprisingly Powerful.
Powered by a 24.8 hp (18.5 kW) Kubota® diesel engine, the
Reelmaster 3550-D provides plenty of power to climb hills,
even while running groomers and rear roller brushes. Thanks
to the standard Series/Parallel 3-wheel drive system, the
Reelmaster 3550-D is able to cling to side hills and green banks
without causing turf damage.
Page 6
Features / Fuel Efficiency
Features Fuel Efficiency
The Toro Reelmaster 3550-D is 10-20% more fuel efficient than competitive “lightweight” fairway
units. Greater fuel efficiency enables the Reelmaster 3550-D to carry less fuel than competitive
models. Less fuel means less weight, and less weight means less stress on your turf.
Reelmaster 3550-D
3.5
Gentle on Turf
The tires on competitive machines suffer from high edge-loading which can
negatively affect after-cut appearance. The Reelmaster 3550-D has a lower
average tire contact pressure, and minimal edge-loading, which translate into
less turf marking in most situations.
Acres per Gallon
Competitor A
3.1
Competitor B
2.9
Easy on the Ears
At just 85 dB(A) (operator ear measurement) at full throttle, the Reelmaster 3550-D
is not only the lightest fairway mower on the market, but also the quietest.
Using less than a gallon of fuel per hour while mowing, the Reelmaster
3550-D is the most fuel efficient lightweight fairway mower on the market.
Just another way the Reelmaster 3550-D helps to reduce the strain on your
operation.
Actual performance may vary. Assumptions used are eighty percent mowing and twenty percent
transport, eighty percent efficiency during mowing to account for overlap and turns, fifteen acres of
mowing area per machine, each machine’s published top mow and transport speeds, identical duty
cycles, full fluids and a 200-lb operator. Testing completed at Toro test facility in February 2013.
Page 7
Accessories
Accessories
Groomers
Rollers
Grass Baskets
Bedknives
Sunshade
Rear Roller Brushes
The best cut gets better.
A variety of accessories are available to make the most of
your Reelmaster 3550-D. Use the fairway groomer, with
exclusive Quick-Set handle, to achieve an even more
impressive quality-of-cut. Rotating blades help reduce
grain, control thatch and knock off dew to minimize
clumping. The groomer stands up grass for a clean, crisp
cut and helps open up the canopy for better clipping
dispersion and integration. A powered rear roller brush
system keeps the rollers clean in order to disperse clippings,
minimize clumping and maintain consistent height-of-cut.
Page 8
Specifications
Reelmaster 3550-D, Model 03910
Engine Kubota® 3-cylinder, liquid-cooled diesel engine. 24.8 hp (18.5 kW) @
3000 RPM. Engine governed to 3220 RPM high idle (± 50 RPM), 1400
RPM low idle (± 50 RPM). Displacement: 68.5 cu.in. (1123 cc). Peak
torque: 57.2 lbs-ft @ 2200 RPM.
Lubrication Pressurized lubrication system with 3.5 quarts (3.3 liters) capacity.
Fuel Filter 10 micron spin-on filter with integral water separator.
Cooling Aluminum side-by-side oil cooler/radiator. 8.5 fins per inch, wavy fin,
non-louvered. 5.25 quart (4.9 liter) capacity.
Fuel Tank Capacity 7.5 gallons (28.3 liters), diesel fuel.
Traction Drive Series/Parallel hydraulic traction circuit provides continuous 3-wheel
drive, in mow and transport. Hydrostatic traction drive provides infinitely
variable speed in forward and reverse. 6 gallon (23 liter) hydraulic system
capacity.
Ground Speed 0-10 mph (0-16.1 km/hr) forward transport; 0-7mph (0-11.3 km/hr)
mow; 0-3.5 mph (5.6 km/hr) reverse.
Tires Three (3) 22x12-12, 4-ply, no tread tires. 12 PSI recommended pressure.
(Optional treaded tires available.)
Main Frame Formed steel, welded steel and steel tubing.
Brakes Hydrostatic service brake. Hand-operated parking brake
Steering Power steering with tilt steering wheel.
Gauges Hour meter, fuel gauge, diagnostic lamp, cluster gauge with glow plug
and charge indicator lights, and low engine oil pressure and high coolant
temperature warning lights (high temperature safety shut off).
Controls Foot operated controls: Forward and reverse traction pedal, mow/
transport speed limiter. Hand operated on control panel: Parking
brake lever, ignition switch, engine throttle lever, work light switch,
on/off switch for cutting units, joystick for cutting unit lift and lower.
Other controls: Steering wheel tilt control, reel speed control, backlap
engagement lever.
Electrical & Interlocks Heavy-duty 12 V battery, 570 CCA; 40 amp alternator/regulator.
Electronic control unit is microprocessor based, solid state control unit
with diagnostic capabilities. Traction pedal neutral, parking brake,
operator presence in seat, and cutting unit engage/disengage safety
interlock switches.
TORO® PROFESSIONAL SERVICES
Reel Drive Hydraulic, open loop through oil cooler & filter. High efficiency pressure
balanced gear type motors and pumps.
Seat Mechanical suspension standard.
Dimensions Height: 74" (188 cm) Length: 110" (279.4 cm) Wheelbase: 59.5" (151.1
cm) Operational Width: 94" (238.8 cm) Transport Width: 91" (213.1 cm)
Weight 1,985 lbs. (900.38 kg) with (5) 18" 8-blade cutting units.
Safety ROPS Standard. Capable of traversing a 25° slope in any direction on dry
grass, while mowing.
Certification Complies with ANSI B24.9-2012 and CE requirements.
Warranty Two-year limited warranty. Refer to the Operator’s Manual for further
details.
18" Cutting units: 03911 (8-blade) & 03912 (11-blade) 22" cutting unit: 03913 (8-blade)
Type Five hydraulically driven, balanced, DPA cutting units. Frame precision
manufactured, die-cast aluminum for increased strength, simple click
adjustment maintenance.
Size 18" (46 cm) wide, 5" (12.7 cm) diameter. Optional 22" (56 cm) wide,
5" (12.7 cm) diameter for the rear positions to increase overlap.
Width of cut 82" (2.1 m)
HOC Range 8-Blade (18") recommended range 0.5" – 1.0" (13 mm - 25 mm).
11-Blade (18") recommended range 0.25" – 0.75" (6 mm - 19 mm).
8-Blade (22") recommended range 0.5" – 1.0" (13 mm - 25 mm).
High HOC Kit available as an option to increase height of cut range from:
1.0" – 1.5" (25 mm – 38 mm).
Reel Speed 2350 (+/- 150) rpm max reel speed at highest setting. 200 rpm max at
low idle and lowest setting for backlapping.
Bedknife Adjustment Precision machined cutting units maintain levelness and hold
adjustments. Dual Precision Adjustment (DPA) allows quick bedknife to
reel adjustment.
Rollers Wiehle front roller and standard rear roller included. Optional front full
and shoulder rollers, and longer rear rollers available.
Grass Baskets Optional 18" (46 cm) or 22" (56 cm) baskets.
The Toro Reelmaster 3550-D meets the specifications of your toughest jobs.
For more detailed information, visit www.toro.com/reelmaster.
Toro Financing A full-service offering for all your
equipment and irrigation purchases. Flexible
financing options can be tailored to meet your
operational needs.
Toro Protection Plus Extended Protection
Plan Protect your budget and your equipment
investment. Plans are available for both new
and used equipment, and you can choose from
various terms to fit your financing terms.
Products depicted in this brochure are for demonstration purposes only. Actual products offered for sale may vary.
©2013 The Toro Company, 8111 Lyndale Ave. S., Bloomington, MN 55420-1196 Part No.13-071-T. Printed in U.S.A.
Toro Genuine Parts Keep the productivity and
performance of your equipment at its peak.
Learn about Performance Parts pricing and MVP
kits. Find replacement parts online at Toro.com/
partsviewer.
Toro Training Toro Factory Service Schools are
available. Explore the training and customer care
areas of Toro.com and ToroNSN.com for readily
available education and training materials.
Toro Controller Repair Provides irrigation
controller boards ready for immediate board
exchange to assure that downtime is minimal and
your turf stays protected. Toro is the choice for
reliability.
Toro NSN
that provides reliable, around-the-clock irrigation
central control system troubleshooting and
operation assistance. Call 1-800-ASK-TORO.
®
An industry-first support network
®
Fleet Management This on-line tool
myTurf
from Toro keeps track of maintenance for all
of your turf equipment. Complete product
information and parts ordering is also included.
Ask your distributor for availability.
Loading...