Toro 03672, 03673, 03670, 03660 Specifications

Reelmaster® 5410 / 5410-G / 5410-D

A lightweight fairway mower that’s agile and easy on the turf, yet has the power and cutting capacity to get even the tough jobs done.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

Reelmaster® 5410 / 5410-G / 5410-D Specifications

ENGINE

LUBRICATION

FUEL FILTER

AIR CLEANER

COOLING

FUEL TANK CAPACITY

HYDRAULIC OIL CAPACITY

TRACTION DRIVE

GROUND SPEED

TIRES

MAIN FRAME

BRAKES

STEERING

GAUGES

CONTROLS

ELECTRICAL & INTERLOCKS

REEL DRIVE

CUTTING UNIT LIFT/LOWER

SEAT

ROPS

HEIGHT

LENGTH (2WD)

WHEEL BASE

OPERATIONAL WIDTH

TRANSPORT WIDTH

WEIGHT

CERTIFICATION

WARRANTY

REELMASTER 5410

DIESEL, MODEL 03675

Kubota® 4-cylinder, liquid cooled, diesel engine.

35.5 hp (26.5 kW) @ 3000 rpm.

Pressurized lubrication system with 5.0 quart (4.7 liter) capacity.

Replaceable spin-on fuel filter/water separator.

Heavy-duty three-stage, radial seal air cleaner with restriction indicator.

Rear mounted radiator with industrial tube and fin construction, 6.5 fins per inch, 7.0 quart (6.6 liter) capacity.

13.5 gallon (51.1 liter) capacity. Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petroleum blend).

9.0 gallon (34.1 liter) capacity. 15 gallon (56.8 liter) capacity.

Front drive wheels powered by a hydrostatic pump with individual wheel motors. All-wheel drive optional with CrossTrax® All-Wheel Drive system, which transfers power from the front wheels to the opposite rear wheels via independent rear wheel motors

0-10 mph (0-16 km/hr) forward transport; 0-8 mph (0-12.8 km/hr) mow; 0-4 mph (0-6.4 km/h) reverse.

Front traction tires: 26.5 x 14-12 turf tires Rear steer tires: 20 x 12-10

High strength steel frame with welded construction.

Individual left and right drum-type front wheel brakes. Brakes may be actuated for service braking via left foot pedal. Integrated foot pedal lock provides parking brake. Dynamic braking through hydrostatic traction drive system.

Rear wheel, power steering with an independent hydraulic pump and circuit.

InfoCenterTM onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics, indicates fuel level, coolant temp., low oil pressure,

alternator, engine hours, engine rpm, voltage, reel speed, backlap speed, glow indicator (diesel), lift/lower indicator.

Single foot-operated traction pedal, foot actuated mow speed limiter, foot actuated service and parking brake. Hand-operated key ignition switch, throttle, cutting unit raise/lower joystick, cutting unit engage switch, and headlight switch all positioned on right hand pivoting control console.

Heavy-duty 12-volt battery, 570 CCA, 40 amp alternator. Electronic control unit is a microprocessor based, solid state control unit with diagnostic capabilities. Traction pedal, parking brake, operator presence in seat, and cutting unit engage/disengage safety interlock switches.

Reel drive circuit is split independently for front and rear cutting units. Hydraulic functions controlled by an integrated hydraulic control block. Reel speeds are electronically adjustable in nine incremental settings. Standard on-board backlapping.

Front and rear cutting unit lift/lower is sequenced for uniform starting and ending points.

Deluxe high back suspension seat with fore, aft, height and weight adjustment.

Standard with seat belt

63" (160 cm) seat top, 85" (217.2 cm) top of ROPS.

111" (281.9 cm)

60" (152.4 cm)

113.5" (288.3 cm)

92" (233.7 cm)

2,505 lbs. (1,136 kg) (2WD), 2,615 lbs. (1,186 kg) (4WD) 2,750 lbs. (1,247 kg) (2WD), 2,860 lbs. (1,297 kg) (4WD) 2,943 lbs. (1,335 kg) (2WD), 3,053 lbs. (1,385 kg) (4WD)

Complies with ANSI B71.4-2004 and CE requirements. Certain machine configurations require rear weight kits for standards compliance, see Operator’s Manual for details.

Two-year limited warranty. Refer to the Operator’s Manual for further details.

Kubota® 4-cylinder, liquid cooled, gas engine. 49 hp (36.5 kW), 88.5 ft. lbs. (120 Nm) torque.

Plate and bar radiator/oil cooler combination, 6.3 fins per inch, 10 quart (9.5 liter) capacity.

14 gallon (53 liter) capacity.

Single foot-operated traction pedal, foot actuated mow speed limiter, foot actuated service and parking brake. Hand-operated key ignition switch, throttle, isochronous engine speed control, cutting unit raise/ lower joystick, cutting unit engage switch, and headlight switch all positioned on right hand pivoting control console.

REELMASTER 5410-G

GAS, MODEL 03608

REELMASTER 5410-D TIER 4 DIESEL, MODEL 03606

Yanmar® 3-cylinder, liquid cooled, diesel engine.

36.8 hp (27.5 kW), 74.4 ft. lbs. (105 Nm) torque,

1.64 liter displacemen

Heavy-duty 12-volt battery, 570 CCA, 55 amp alternator. Electronic control unit is a microprocessor based, solid state control unit with diagnostic capabilities. Traction pedal, parking brake, operator presence in seat, and cutting unit engage/ disengage safety interlock switches.

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

The Reelmaster 5410 is manufactured in Tomah, WI ISO 9002 Certified Plant.

+ 1 hidden pages