Toro 03171, 03170 Specifications

Reelmaster® 3100-D

The 3100-D triplex trim mower provides superb cutting, ultra comfort and ease of service – featuring
a unique rear engine layout and optional Sidewinder™ cutting units.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

59

ENGINE

CONFIGURATION

FUEL CAPACITY

TRACTION DRIVE

GROUND SPEED

CONTROLS

GAUGES

ELECTRICAL &

INTERLOCKS

TIRES

FRAME

BRAKES

STEERING

OVERALL

DIMENSIONS

CUTTING UNIT

CONFIGURATION

CUTTING UNIT

OFFSET

CERTIFICATION

WARRANTY

Reelmaster® 3100-D Specifications

*

REELMASTER 3100-D, MODEL 03170 REELMASTER 3100-D, MODEL 03171 w/SIDEWINDER

Kubota® liquid-cooled diesel, 3-cylinder, 21.5 hp (16 kW) net @ 2500 RPM. HIgh idle: 2,600 rpm, Low idle: 1,400 rpm (+/- 50 rpm). 68.5 cu. in. (1123 cm3)
displacement. Pressurized lubrication system with 3.5 U.S. qt. (3.3 liter) capacity. Heavy-duty, radial seal air cleaner. Fuel/water separator with visible bowl.

Rear mounted engine, front operator position. Rear mounted radiator. Two post ROPS and seat belt standard.

7.5 gallons (28 liters). Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petroleum blend).

Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport. Hydrostatic traction drive
provides infinitely variable speed in forward and reverse. 6 gallon (23 liter) hydraulic system capacity.

Mow: 0-6 mph (0-10 km/h); Transport: 0-9 mph (0-14 km/h). Reverse: 0-4 mph. (0-6 km/h).

Forward and reverse traction control pedals, mow/transport lever, hand activated park brake, ignition key switch, tilt steering wheel lock, PTO switch, throttle, joystick
control for cutting unit raise and lower (and for moving cutting units side-to-side on Sidewinder equipped models), cutting unit transport lock, reel speed and
backlap control knob.

Hour meter, fuel gauge, cluster gauge with glow plug and charge indicator lights, and low engine oil pressure and high coolant
temperature warning lights (high temperature safety shut off).

12-volt, 585 cold cranking amps at 0° F (-18° C), 40 amps with regulator/rectifier. Traction pedal, operator presence in seat, PTO engage or disengage, and cutting
unit mow or transport safety interlock switches.

Front: 20 x 12-10, 4-ply Turf Tread. Rear: 20 x 10-10, 4-ply Turf Tread

Formed steel, welded steel and steel tubing.

Hydrostatic service brake, hand-operated parking brake.

Power steering with tilt steering wheel.

Track Width: 55" (140 cm) Overall Height: 71" (180 cm) with ROPS
Wheel Base: 56" (142 cm) Transport Width: 80" (203 cm) in 72" (183 cm) woc
92" (234 cm) in 85" (216 cm) woc
Overall Length: 93" (248 cm) Approx. Weight with Cutting units: 1860 lbs. (844 kg)

Fixed position cutting units.

3" (7.6 cm) in 72" (183 cm) width of cut
10" (25 cm) in 85" (216 cm) width of cut

This product complies with the American National Standards Institute (ANSI B71-4 – 2012) and European Community
specifications (CE Certified). EN ISO 5395.

Two-year limited warranty, refer to operators manual for details.

Operator controlled moveable cutting units travel ±12" (30 cm)
left or right from center; total of 24" (61 cm) of infinite variability.

Maximum 15" (38 cm) in 72" (183 cm) width of cut.
Maximum 22" (56 cm) in 85" (216 cm) width of cut.

27" CUTTING UNITS (03180, 03181, 03183) / 32" CUTTING UNITS (03182)

Three hydraulically-driven, balanced, 7" (17.8 cm) diameter reels. Cutting units interchangeable to all three positions.

TYPE

REEL BLADE OPTIONS

HOC RANGE

CUTTING WIDTH

CLIP FREQUENCY/

BACKLAPPING

BEDKNIFE-TO-REEL

ADJUSTMENT

ROLLERS

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

5, 8, and 11-blade reels available for 27" (68.6 cm) cutting unit. 8-blade reels available for 32" (81.3 cm) cutting unit.

Height of cut ranges .25" to 2" (.63 - 5.1 cm) standard in floating position, 1.5" to 2.5" (3.8 - 6.4 cm) in fixed position.

72" (183 cm), or 85" (216 cm) width of cut dependent on cutting unit selection.

Manually controlled variable reel speed for adjustment of clip frequency. Standard on-board backlapping.

Dual point adjustment (DPA) of bedknife to reel.

Full roller standard on rear of cutting unit and plastic front Wiehle roller.

60

The Reelmaster 3100-D is manufactured
in Tomah, WI ISO 9002 Certified Plant.