Tork 555520A, 555528A Service And Parts Manual

Washroom Dispenser Service and Parts Manual
Tork Elevation T2 Mini Twin Jumbo Roll Tissue Dispenser
555520A, 555528A Revision Date: 4-28-10

Tork Elevation T2 Mini Twin JBT Dispenser:

T2 System: 555520A (white), 555528A (black)
Dispenser Dimensions HxWxD inches (cm):

10.66 x 16.4 x 5.44 (27.08 x 41.66 x 13.82 cm)

Tork T2 Mini Jumbo Bath Product Options:

12024402 (Tork Advanced, 2 Ply)
12013902 (Tork Advanced, 1 Ply)
120246 (Tork Advanced, 2-Ply)

Dispenser Parts

Part Description Replacement SKU

LEFT/RIGHT ROLL ARM
SPINDLE
PAPER ACCESS DOOR
HOOD ASSY WHITE
HOOD ASSY BLACK
(Includes 2 e-clips & pins)
200260 KEY FOR ALL
TORK DISPENSERS
TORK LOCK

200261 KEYHANDLE
FOR KEYLESS ENTRY

225556P (white)
225557P (black)

200260 KEY
200262-10 or

200262-20
200261
KEYHANDLE

1 of 5

Washroom Dispenser Service and Parts Manual

c

Tork Elevation T2 Mini Twin Jumbo Roll Tissue Dispenser
555520A, 555528A Revision Date: 4-28-10

Part Description with Replacement Instructions

Parts with SKUs listed are available for order as of the revision date on the manual. Contact an SCA
Sales Rep or the SCA Tissue Quality Coordinator to order these parts.

If no SKU is listed, the availability of the part is unknown. Please contact the SCA Tissue Quality
Coordinator for more information (see Contacting SCA

section).

Replacement SKU Description & Replacement Instructions

LEFT/RIGHT ROLL ARM

The roll arms sit on the outside of the bath tissue rolls. As the roll is depleted,
the roller gets close to the spindle, and allows the access door to unlock and
slide to the opposite side for access to the reserve tissue roll. Not replaceable.

SPINDLES

Hold two jumbo bath tissue rolls. Not replaceable.

PAPER ACCESS DOOR

The access door will be locked to one side, allowing access to one of the tissue
rolls and blocking access to the other until one roll has completely dispensed.

Not replaceable.
225556P White
225557P Black

T2 MINI TWIN HOOD ASSEMBLY

With door open, locate e-clip holding the hinge piN in place. Use pliers to

remove the e-clip. Pull hinge pin out by pulling out to the left and the right side.

Each hood assembly will include the hood, 2 new e-clips and 2 matching color

hinge pins.
200262-20 TORK LOCK

The lock can be replaced by removing the U-clip from the inside of the dispenser

with a pliers or screwdriver.
200261
KEYHANDLE

SCA 200261 KEYHANDLE

Insert keyhandle into lock to provide keyless access. Note: Lock cannot revert ba

keyed entry once keyhandle has been inserted.
200260 KEY SCA 200260 METAL KEY FOR ALL TORK DISPENSERS

Loading Instructions

1. To fill dispenser after mounting: Open cover. Before loading paper, slide door completely to one side.
Raise the each roll arm, placing refill on spindle and resting arm on outside of full roll. Feed the paper
through the opening and close the cover. For best performance, rolls should be oriented so each tail
feeds over the top of the roll into the center of the dispenser.

2. When one of the rolls is completely dispensed, the access door will unlock and the user will be able to
slide it to the opposite side. The user will then have access to the reserve tissue roll.

3. To replenish rolls: Open cover. Raise roll arm and remove the empty cores. Load a new Tork Jumbo
Bath Tissue refill onto spindle

Preventive Maintenance

The dispenser should be cleaned any time there is heavy paper dust build-up inside the dispenser. If
paper dust is not a problem, approximately every year is a good frequency for cleanings. The following is
the recommended procedure to cleaning:

1) Open the dispenser and remove the rolls of paper.

2 of 5