Tork Elevation T2 Mini JBT Series, 555020A, 555028A Service And Parts Manual
Washroom Dispenser Service and Parts Manual
Tork Elevation T2 Mini JBT Dispenser
555020A; 555028A
Revision Date: 3-12-18
1 of 7
Essity Internal
Dispenser Parts
Tork Elevation T2 Mini JBT Dispenser:
T2 System: 555020A (white); 555028A (black)
Dispenser Dimensions HxWxD Inches (cm):
10.8 x 13.6 x 5.2 (27.5 x 34.5 x 13.2 cm)
Refill Product Options (T2 System):
12024402 (Tork Advanced, 2 Ply)
12013903 (Tork Advanced, 1 Ply)
120246 (Tork Advanced, 2-Ply)
Part Description Replacement SKU
KEY FOR TORK
DISPENSER
200260 KEY
T2 HOOD WHITE
225550
T2 HOOD BLACK
225551
ELEVATION LOCK WHITE
205502
ELEVATION LOCK BLACK
205503
Part Description with Replacement Instructions
Parts with SKU numbers are available for order as of the revision date on the manual. Contact an
Essity Sales Rep or the Essity Quality Coordinator to order these parts.
Replacement SKU Description & Replacement Instructions
225550 White
225551 Black
T2 HOOD
The hood can be replaced. There is a tabbed pivot on the hood that should be
aligned with the notched hole on the back. The notch and tab will line up when the
cover is open approximately 45 degrees. Push out to release from back on one
side, then the other.
205502 White
205503 Black
ELEVATION LOCK (WHITE OR BLACK)
The lock can be replaced by pressing the plastic tabs on each side to free the lock
from the opening.
200260 KEY
METAL KEY FOR TORK DISPENSERS
Washroom Dispenser Service and Parts
Manual
Tork Elevation T2 Mini JBT
Dispenser
555020A;
555028A
Revision Date:
3-12-18
2
of?
Essity Internal
x4
'
8
Mounting
and
Filling Instructions
Installation instruction sheet and mounting template are provided inside each
carton.
@!r
1
.
+
r·
·
-
c::
lo
10:11
x1
-
E:$=
X4
2
.
C!:!:l
..
7
0<11
'1
---·
2
3 of 7
Washroom Dispenser Service and Parts Manual
Tork Elevation T2 Mini JBT Dispenser
555020A; 555028A
Revision Date: 3-12-18
Essity Internal
Using Stub Roll Feature
The dispenser has an indication of when the roll may be moved to the stub roll position.
When the red mark printed on the back of the dispenser is visible, the roll may be moved onto the stub
roll spindle and a new, full roll may be replaced on the main spindle.
Loading...