How it Works
TORISAN
Loading...
TM150XG-26L09A
Specification
18 pgs625.03 Kb0

TORISAN TM150XG-26L09A Specification

Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
NOTICES
1. The contents stated in this document and the product may be subject to change without prior notice.
When you kindly study to use this product, please ask us or our distributor
for the latest information.
3. This document shall not grant or guarantee any right to adapt intellectual property or any other patents of third party.
4. Please use this product correctly according to operating conditions and precautions for use stated in this document.
Please install safety proof in your designing to avoid human accident, fire accident and social damage, which may be resulted from malfunction of this product.
www.panelook.com
5. This product is not designed to withstand against radiant rays.
6. It is strictly prohibited to copy or publish a part or whole of this document without our prior written approval.
REVISION HISTORY
DATE REVISION
NO.
Nov.12,01 Ver. 1 - Initial Release.
Nov.21,01 Ver. 2 7 Change INTERFACE PIN CONNECTIONS
Dec.12,01 Ver. 3 3
8
PAGE DESCRIPTIONS
OPTICAL CHARACTERISTICS
Change Brightness & Color of CIE Coordinate
INTERNAL SIGNAL TIMING PARAMETERS
Add DE Vert. Period MAX data.
Tottori SANYO Electric Co., Ltd. TM150XG-26L09A Ver.3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page
1/17
www.panelook.com
Global LCD Panel Exchange Center
MECHANICAL CHARACTERISTICS
ITEM SPECIFICATION UNIT LCD module size Resolution Sub pixel pitch Pixel pitch Active viewing area Bezel opening area Weight 1250TYP. g
ELECTRICAL ABSOLUTE MAXIMUM RATINGS
ITEM SYMBOL MIN MAX UNIT NOTE Power supply voltage VDD-VSS -0.3 4.0 V Input logic voltage VI V CFL lamp current IL - 6.5 mA
www.panelook.com
331.6(W) u 254.75(H) u 12.5(T) 1024 u RGB(W) u 768(H)
0.099(W) u 0.297(H)
0.297(W) u 0.297(H)
304.1(W) u 228.1(H)
307.2(W) u 231.1(H)
-0.3 VDD+0.3 V
SS
Ta= 25qC
mm
pixel
mm mm mm mm
Ta= 25qC
ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS
Ta= 25qC
ITEM SYMBOL CONDITIONS MIN MAX UNIT NOTE
TST Storage -20 60 Ambient temperature Humidity -
Vibration - Storage - 1.5 G Note 3 Shock - Storage - 50 G XYZ 11ms/direction
T
Operation 0 50
OP
Ta= 40qC max.
- 85 %RH No condensation
qC
Note 1
Note 2
[ Note 1 ] Care should be taken so that the LCD module may not be subjected to the
temperature beyond this specification.
[ Note 2 ] Ta>40qC: Absolute humidity shall be less than that of 85%RH/40qC.
[ Note 3 ] 10-200Hz, 30min/cycle, X/Y/Z each one cycle and except for resonant
frequency.
ELECTRICAL CHARACTERISTICS
VDD=3.3V ,fV=60Hz ,f
ITEM SYMBOL CONDITIONS MIN TYP MAX UNIT NOTE
Power supply voltage VDD-VSS 3.0 3.3 3.6 V
input logic voltage
Power Supply current I
VIH High level 0.8VDD - 3.6
Low level Vss - 0.2V
IL
V
Note 1 - (300) (630) mA
DD
=32.5MHz ,Ta=25qC
CLK
DD
V
[ Note 1 ] Under the following display image :
Typ. value : Display pattern is 256 gray scale bar.
Tottori SANYO Electric Co., Ltd. TM150XG-26L09A Ver.3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page
2/17
www.panelook.com
Global LCD Panel Exchange Center
OPTICAL CHARACTERISTICS
ITEM SYMBOL CONDITIONS MIN TYP MAX UNIT NOTE Brightness B Brightness uniformity Contrast ratio CR
Viewing angle range
Rise tr - 20 - Response
time
Color of CIE
Coordinate
Fall tf
Red
Green
Blue
White
www.panelook.com
Ta=25ºC, VDD=3.3V, fV=60Hz
I = 0º I = 0º I = 0º
T = 0º
I
CR>10
T = 90º T =180º T =270º
I = 0º
x (0.576) (0.626) (0.676) y (0.296) (0.346) (0.396) x (0.246) (0.296) (0.346) y (0.555) (0.605) (0.655) x (0.090) (0.140) (0.190)
I = 0º
y (0.030) (0.080) (0.130) x (0.267) (0.317) (0.367) y
(350) (450) - cd/m2 Note 5,8
- - 1.30 - Note 5,6,8 300 500 - - Note 2,4,8 (50) (65) ­(60) (70) ­(40) (55) -
deg.
Note 1,2, 4,8
(60) (70) -
- 5 -
ms. Note 3,4,8
- Note 4,8
(0.276) (0.326) (0.376)
I
White DATA
T=270q
T=180q
T
T=0q
T=90q
Black Black
100%
B
90%
10%
0%
tr
[ Note 1 ] I and T [ Note 3 ] Response time
[ Note 2 ] Contrast ratio "CR"
Brightness at White
CR =
Brightness at Black
[ Note 4 ] This shall be measured at center point No.3 of Note 7.
tf
[ Note 5 ] The brightness shall be the average of the following 5 points of Note 7.
[ Note 6 ] The brightness uniformity shall be calculated by using following formula.
Maximum brightness of 5 points
Brightness uniformity =
Minimum brightness of 5 points
Tottori SANYO Electric Co., Ltd. TM150XG-26L09A Ver.3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page
3/17
www.panelook.com
Global LCD Panel Exchange Center
p
[ Note 7 ] Measurement points
1/6V
www.panelook.com
5/6H1/2H1/6H
Active area
1 2
1/2V
5/6V
4
3
5
Vp: Total Number of Vertical pixel
: Total Number of horizontal
H
[ Note 8 ] Measurement condition
(1) Measurement equipment: BM-5A (TOPCON Corp.), Field=2q (2) Ambient temperature Ta: 25 r 2qC (3) LCD: All pixels are WHITE, V
=3.3V, fV=60Hz
DD
(4) Measure after 30 minutes of CFL warm up. (5) I
=6.0mArms with the CFL inverter CFP-102 (TORiSAN)
L
BACKLIGHT CHARACTERISTICS
This module is used the backlight with 4 CFL. Please follow the characteristics of 1 CFL as below.
Ta= 25qC
ITEM SYM. CONDITIOS MIN TYP MAX UNIT NOTE Lamp voltage VL - 570 - Vrms at IL=6.0mArms Lamp current IL 3 - 8 mArms Operating frequency fL - 55 - kHz Start up voltage VS - - 1500 Vrms at Ta=0ºC Operating life
50000 - - Hours at IL
t
OL
(Recommended value) (Recommended value)
=6.0mArms
[ Note 1 ] Backlight driving conditions (operating frequency fL especially) may interfere with
horizontal frequency f operating frequency f
, causing the beat or flicker on the display. Therefore the
H
shall be adjusted in relation to horizontal frequency fH to
L
avoid interference. And please make sure that frequency, phase of Drive voltage and current of four lamps, match each other.
[ Note 2 ] The inverter open voltage should be larger than start up voltage, otherwise
backlight may blinking for a moment after turns on or not be turned on. And this voltage should be applied to lamp for more than 1 second to start up, otherwise backlight may not be turned on.
[ Note 3 ] If driving current waveform is asymmetrical, mercury deviation inside of CFL will
incline to one side and consequently abnormal lighting may occur.
To prevent such unfavorable lighting, driving current waveform is asked to have
unbalance rate of less than 10% and wave-height rate of less than C2 r 10%.
And this driving waveform shall be confirmed in your system.
Unbalance rate = | Ip - I-p | / IL u 100 (%)
Ip
I-p
Wave-height rate = I
I
p : High peak value
-p : Low peak value
I
I
L : Effective value
p (or I-p) / IL
Current waveform
[ Note 4 ] The inverter of ground reference type should be used. The inverter of ground
floating type should not be used.
Tottori SANYO Electric Co., Ltd. TM150XG-26L09A Ver.3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page
4/17
www.panelook.com
Global LCD Panel Exchange Center
Gate
ve
BLOCK DIAGRAM
FL
CN2
FL
CN1
ASIC
www.panelook.com
CFL
CFL
CN1CN2
DATA
VDD
VSS
(RGB u 8bits)
TFT
Timing
DC/DC
Converter
DATA(RGB u 6bits)
Generator
Vcom
r
Dri
768
Source Driver
1024u(RGB)
TFT Panel
Back Light
FL
CN3
FL
CN4
[ Note 1 ] ASIC converts incoming RGB u 8 bits data into outgoing RGB u 6 bits data
with frame rate modulation and dithering, which enables LCD to perform 'pseudo-8 bits color'.
Tottori SANYO Electric Co., Ltd. TM150XG-26L09A Ver.3
CFL
CFL
Page
5/17
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
+ 12 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use