TORISAN TM150XG-22L05 Specification

ENGINEERING SPECIFICATIONS

TFT COLOR LCD MODULE

TM150XG-22L05

- 38cm (15.0 inch) diagonal

- XGA resolution (1024 x RGB x768 dots)

- Digital RGB (RGB x 6 bits x Dual Port)

- With CFL backlight unit

- Nonglare surface type

(TENTATIVE)

Ver.3 Feb. 19, 2001

Tottori SANYO Electric Co., Ltd.

Electronic Device Business Headquarters

LCD Division

3-201, Minami-yoshikata, Tottori, 680-8634 Japan

TEL: [phone], 1958
FAX: [phone]

NOTICES

1. The contents stated in this document and the product may be subject to
change without prior notice.

When you kin dly study to use this produ ct, please ask us or our distrib utor

for the latest information.

2. This product is developed and produced for usage onto normal electronic
products (office automation equipments, communication peripherals, electric
appliance products, game machines, etc.) and is not suitable for applications
which need extremely high reliability and extreme safety (aero- or space-use
machines, control equipments for nuclear power, life keeping equipments,
etc.).

3. This document shall not grant or guarantee any right to adapt intellectual
property or any other patents of third party.

4. Please use this product correctly according to operating conditions and
precautions for use stated in this document.

Please install safety proof in your designing to avoid human accident, fire
accident and social damage, which may be resulted from malfunction of this
product.

5. This product is not designed to withstand against radiant rays.

6. It is strictly prohibited to copy or publish a part or whole of this document
without our prior written approval.

REVISION HISTORY

DATE

Dec.1,00 Ver.1 - Initial Release

Dec.14,00 Ver.2

Feb.19,01 Ver.3

REVISION

NO.

PAGE DESCRIPTIONS

2,4,10-14 Revised CFL -> Lamp

6,7 Revised LCM CN1,2 pin assignment

7 Revised Back Light FLCN1,2

15 Revised outer dimensions

2 Revised Weight (940) -> 940

Revised Power Supply current
3 Revised Optical Characteristics
4 Revised Backlight Characteristics Note1
8 Revised DCLK(Period -> Frequency)

15 Revised outer dimensions

Tottori SANYO Electric Co., Ltd. TM150XG-22L05 Ver.3

Page

1/15

MECHANICAL CHARACTERISTICS

ITEM SPECIFICATION UNIT
Module size 336.0(W) x 255.6(H) x 10.0 Max.(t) mm
Resolution 1024 x RGB(W) x 768(H) pixel
Sub pixel pitch 0.099(W) x 0.297(H) mm
Pixel pitch 0.297(W) x 0.297(H) mm
Active viewing area 304.1(W) x 228.1(H) mm
Bezel opening area 307.3(W) x 231.3(H) mm
Weight 940 TYP. g

Ta=25 degC

ELECTRICAL ABSOLUTE MAXIMUM RATINGS

ITEM SYMBOL MIN MAX UNIT NOTE
Power supply voltage VDD-VSS -0.3 4.0 V
Input voltage VI VSS-0.3 VDD+0.3 V
Lamp current I

L - 6.5 mA

Ta=25 degC

ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS

ITEM SYMBOL CONDITIONS MIN MAX UNIT NOTE

TST Storage -20 60 Ambient

temperature
Humidity - Ta=40 degC max. - 85 %RH No condensation

Vibration - Storage - 1.5 G Note 3
Shock - Storage - 50 G XYZ 11ms/direction

OP Operation 0 50

T

degC Note 1

Note 2

[Note 1] Care should be taken so that t he LCD m odule may not be subjected to the

temperature beyond this specification.
[Note 2] Ta>40 degC: Absolut e humidity shall be less than that of 85%RH/40 degC.
[Note 3] 10-200Hz, 30min/cycle, X/Y/Z each one cycle and except f or resonant frequency.

Ta=25 degC

ELECTRICAL CHARACTERISTICS

ITEM SYMBOL CONDITIONS MIN TYP MAX UNIT NOTE

Power supply voltage VDD-VSS 3.0 3.3 3.6 V
Input logic voltage
Power Supply current I

VTH High level 2.0 - VDD-VSS

TL Low level VSS - 0.8

V

DD Note 1 - 210 430 mA Note 1

VDD=3.3V ,fV=60Hz ,fCLK=65MHz ,Ta=25 degC

V

[ Note 1 ] Typ. value : display pattern is 64 gray scale bar.

Tottori SANYO Electric Co., Ltd. TM150XG-22L05 Ver.3

Page

2/15

OPTICAL CHARACTERISTICS

ITEM SYMBOL CONDITIONS MIN TYP MAX UNIT
Brightness B =0 deg. 150 200 ­Contrast ratio CR =0 deg. - 500 - - Note2,4,7

Viewing angle range CR>10

Rise tr - 20 - Response

time

Color of CIE

Coordinate

Color gamut C =0 deg. to NTSC - 67 - % Note 4,7

Left

[Note 1] [Note 3] Response time

Fall tf
Red

Green

Blue
White

Top

φφφφ

φφφφ

x 0.58 0.63 0.68
y 0.29 0.34 0.39
x 0.24 0.29 0.34
y 0.56 0.61 0.66
x 0.09 0.14 0.19
y 0.03 0.08 0.13
x 0.275 0.305 0.335
y

φφφφ

Bottom

φφφφ

φφφφ

Bottom 40 55 ­Right 50 60 ­Top 35 50 ­Left 50 60 -

=0 deg.

φφφφ

=0 deg.

φφφφ

φφφφ

DATA

Right

100%

B

0%

[Note 2] Contrast ratio "CR" is defined as :

CR =

Brightness at White
Brightness at Black

[Note 4] This shall be measured at center ( point No.3 shown in Note 6).
[Note 5] The brightness shall be the average of five points shown in Note 6.

[Note 6] Measurement points

1/6Vp

1/2Vp

1/6Hp

1

5/6Hp 1/2Hp

2

3

Ta=25 degC, VDD=3.3V , fV=60Hz

cd/m2

deg.

- 5 -

0.294 0.324 0.354

90%

10%

Active area

ms.

- Note 4,7

Note5,6,7

Note 1,2,
4,7

Note
3,4,7

NOTE

5

5/6Vp

4

Vp: Total Number of Vertical pixel
Hp: Total Number of horizontal pixel

Tottori SANYO Electric Co., Ltd. TM50XG-22L05 Ver.3

Page

3/15

[Note 7] Measurement condition

(1) Measurement equipment: BM-5A (TOPCON Corp. ), Field=2 degree
(2) Ambient temperature Ta: 25 +/- 2 degC
(3) LCD: All pixels are WHITE, V
(4) Measure after 30 minutes of Lam p warm up.

=6.0 mArms with the Lamp inverter CXA-P1212A- VJL ( TDK).

L

(5) I

BACKLIGHT CHARACTERISTICS

This module is used the backlight with 2 Lamp.
Please follow the characteristics of 1 Lamp as below.

=3.3V, fV=60Hz

DD

Ta=25 degC

ITEM SYM. CONDITIOS MIN TYP MAX UNIT NOTE
Lamp voltage VL - 610 - Vrms at IL=6.0mArms
Lamp current IL 3 - 6 mArms
Operating frequency fL 40

55

65 kHz

Recommended value
Recommended value

Start up voltage VS - - 1800 Vrms at Ta=0 degC
Lamp life

20000 - - Hours at I

OL

t

L

=6.0 mArms

[Note 1] Backlight driving conditions (operating frequency fL especially) may interfere with

horizontal frequency f

Therefore the operating frequency f

frequency f

to avoid interference. And, In case you drive 2 Lamp with 2 separate

H

, causing the beat or flicker on the display.

H

shall be adjusted in relation to horizontal

L

transformers, please make sure that frequency and phase of both transformers

match each other.

[Note 2] The inverter open voltage should be larger than start up voltage, otherwise backlight

may blinking for a moment after turns on or not be turned on. And this voltage

should be applied to lamp for more than 1 second t o st art up, otherwise backlight

may not be turned on.

[Note 3] If driving current waveform is asymmetrical, mer cur y deviation inside of Lamp will

incline to one side and consequently abnormal lighting may occur.

To prevent such unfavorable light ing, driving current waveform is ask ed t o have

unbalance rate of less than 10% and wave-height rate of less t han 2 +/- 10%.

And this driving waveform shall be confirmed in your system.

p

I

Unbalance rate = | I
Wave-height rate = I

p

- I-p | / IL x 100 (%)

p

(or I-p) / I

L

-p

I

p

I

: High peak value

-p

I

: Low peak value

L

I

: Effective value

Current waveform

Tottori SANYO Electric Co., Ltd. TM150XG-22L05 Ver.3

Page

4/15