Toptech True Comfort IIII TT-S-955 Operating Manual

Download

OPERATING MANUAL

This manual covers TopTech models:

TT-S-955

Congratulations on purchasing a new thermostat. This thermostat was

designed to the highest reliability and ease of use standards. Thank you for choosing Pro1.

Table of Contents Page

Thermostat Quick Reference Thermostat Operation Programming Contact Us and Warranty Registration

2 3 4 6

Caution:

Equipment damage hazard

Do not operate the cooling system if the outdoor temperature is below 50˚ F (10˚ C) to prevent possible compressor damage.

Need Help?

For assistance with this product please visit http://toptech.pro1iaq.com or call our Customer Care Center toll-free at 1-888-776-1427 during normal business hours (Mon-Fri 9 AM - 6 PM Eastern)

Una versión española de este manual puede ser descargada en http://toptech.pro1iaq.com

Rev. 1019

Getting to know your thermostat

THERMOSTAT QUICK REFERENCE

Light Key (Glow in the Dark )

Fan Key

System Key

Temperature Setpoint Keys

Menu Key

Program Icons

Important:

The low battery indicator is displayed

LCD

Programmable Time Period Icons:

This thermostat has 4 programmable time periods per day.

Temperature: Indicates the current system temperature.

Clean Display: Pressing CLEAN DISPLAY will allow 30 seconds to clean the display. The keys will be inoperable during this time. CLEAN will appear if your contractor has programmed a filter change reminder. Press CLEAN when filter has been replaced to reset the filter change reminder timer.

Days of the week and time.

Low Battery Indicator: Replace batteries when this indicator is shown.

when the AA battery power is low. If the user fails to replace the battery within 21 days, the thermostat display will only show the low battery indicator as a final warning before the thermostat becomes inoperable. The batteries are located on the back of the thermostat.

REMOTE indicates a remote has control of the system.

Program Menu Options:

Shows different options during programming.

HOLD is displayed when thermostat program is permanently overridden.

Displays the user selectable setpoint temperature.

System operation indicators:

COOL HEAT FAN

The COOL, HEAT or FAN icon will display when the COOL, HEAT or FAN is on. NOTE: The compressor delay feature is active if these icons are flashing. The compressor will not turn on until the 5 minute delay has elapsed.

Battery information

On the back of the thermostat insert 2 AA Alkaline batteries (included).

Pull the thermostat directly away from the wall to access the batteries. A firm tug will be required to remove the thermostat from the subbase mounted on the wall.

Easy to use controls

THERMOSTAT OPERATION

Caution:

When the battery icon appears replace your AA

batteries immediately. Failure to do so may result in your heating and cooling system becoming inoperable.

LCD Display:

See page 2 for details about this display readout and icons.

Glow in the Dark Light Button:

Press and release the light button to turn on the display light. The glow in the dark light button will self illuminate for several hours after exposure to ambient light. DO NOT hold down the light button for more then 10 seconds. This will break the communication link between the T955W and the base module.

A Note About Auto Changeover:

Auto changeover will switch between heating and cooling as needed. It is very

important to make sure the cooling setpoint temperature is at least 3º above the heating setpoint temperature and that the heating setpoint temperature is at least 3º below the cooling setpoint temperature.

System Key:

Selects the operation mode of your HVAC system. Selecting HEAT turns on the heat mode. Selecting COOL turns on the air conditioning mode. Selecting OFF turns both heating and cooling off. Selecting AUTO will turn the HEAT or COOL on as needed.

Temperature Setpoint Buttons:

Press the room temperature.

+ or - buttons to select the desired

Fan Key:

Select ON or AUTO. The ON key will run the fan continuously. The AUTO key will cycle the fan on only when the heating or cooling system is on.

A Note About Programmable Fan:

The programmable fan feature will run the fan continuously during any time period it is programmed to be on. This is the best way to keep the air circulated and to eliminate hot & cold spots in your building.

Menu Keys:

Use these keys to set up your programming options. Refer to the next page for instructions.

Programmable Time Period Icons:

This thermostat has 4 programmable time periods per day.

Set Time

PROGRAMMING THE THERMOSTAT

Follow the steps below to set the current time:

Press MENU

Press SET TIME

Day of the week will be flashing. Use the or key to select the current day of the week.

Press NEXT STEP

The current hour is flashing. Use the or key to select the current hour. When using 12-hour time, make sure the correct a.m. or p.m. choice is selected.

Press NEXT STEP

Minutes are now flashing. Use the or key to select current minutes.

Press DONE when completed

Important:

You will see a TECHNICIAN SETUP option after the MENU

key is pressed.

This TECHNICIAN SETUP key is for installer configuration and should NOT be changed unless you consult your Professional Heating and Air Conditioning Technician.

Keypad Lockout Note:

If appears in display then the keypad is locked. All or some of the keys will not work. Hold the and keys for 3 seconds to remove the lock.

Set Program Schedule 5+1+1

To customize your 5+1+1 program schedule, follow these steps:

Weekday:

Select HEAT or COOL using the SYSTEM key. Note: You have to program heat and cool each separately.

Press MENU

Press SET SCHED. Note: Monday-Friday is displayed and the WAKE icon is shown. You are now programming the WAKE time

period for the weekday setting.

Time is flashing. Use the or key to make your time selection for the weekday WAKE time period. Note: If you want the fan to run continuously during this time period, select ON with the FAN key.

Press NEXT STEP

The setpoint temperature is flashing. Use the or key to make your setpoint selection for the weekday WAKE period.

Press NEXT STEP

Saturday:

Repeat steps 4 through 7 for

Saturday WAKE time period, for Saturday LEAVE time period, for Saturday RETURN time period, and for Saturday SLEEP time period.

Sunday:

Repeat steps 4 through 7 for

10.

Sunday WAKE time period, for Sunday LEAVE time period, for Sunday RETURN time period, and for Sunday SLEEP time period.

Repeat steps 4 through 7 for weekday LEAVE time period, for weekday RETURN time period, and for weekday SLEEP time period.

PROGRAMMING THE THERMOSTAT

Set 7 Day Program Schedule

To customize your 7 day program schedule, follow these steps:

Select HEAT or COOL using the system key. You have to program heat and cool each separately.

Press MENU

Press SET SCHED Note: Monday is displayed and the WAKE icon

is shown. You are now programming the WAKE time period for the Monday setting.

Time is flashing. Use the or key to make your time selection for the Monday WAKE time period. Note: If you want the fan to run continuously during this time period, select ON with the FAN key.

Press NEXT STEP

Filter Change Reminder

If your installing contractor has configured the thermostat to remind you when the air filter needs changed, you will see FILT in the display when your air filter needs changed. FILT will be shown in the display after your system has run long enough to require an air filter change.

The setpoint temperature is flashing.

Use the or key to make your setpoint selection for the Monday WAKE period.

Press NEXT STEP

Repeat steps 4 thru 7 for Monday LEAVE time period, for Monday RETURN time period, and for Monday SLEEP time period.

Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday

Repeat steps 4 thru 7 for the remaining days of the week.

Temporary and Permanent Hold Feature

Temporary hold: The thermostat will display

HOLD and RUN SCHED on the bottom of your screen when you press the or key. If you do nothing, the temperature will remain at this setpoint temporarily for 4 hours. Your program setpoint will then replace your temporary setpoint.

Resetting the filter change reminder: When FILT reminder is displayed, you should change your air filter and reset the reminder by holding down the second button from the left side of the thermostat for 3 seconds.

Permanent hold: If you press HOLD key at

the bottom of your screen, you will see HOLD appear below the setpoint temperature in the display. The thermostat will now permanently stay at this setpoint and can be adjusted using the

or keys.

To return to program: Press the RUN SCHED

key at the bottom of your screen to exit either temporary or permanent hold.

Hold down for 3 seconds, to reset filter reminder.

Pro1 IAQ Inc.

1111 S. Glenstone Suite 2-100 Springeld, MO 65804

Toll-free: 1-888-Pro1iaq (776-1427) Toll Number (Outside the USA): 330-821-3600 Web: http://www.pro1iaq.com Hours of Operation: Monday - Friday 9 AM - 6 PM Eastern

Complete form and mail to:

Pro1 IAQ Inc.

1111 S. Glenstone Suite 2-100 Springeld, MO 65804

Warranty Registration:

Your new Pro1 thermostat has a 5 year limited warranty. You must register your warranty within 60 days of installation. You can register your new thermostat in 2 ways.

Go to www.pro1iaq.com, select warranty registration and fill out a short registration form.

- or -

Complete the form below and mail it to the address shown.

Pro1 IAQ Warranty Registration:

Name: ____________________________

Address: ____________________________

____________________________

City: ____________________________

State: ____________________________

Zip: _____________________

Thermostat Model: _____________________

Date Installed: _____________________

Toptech True Comfort IIII TT-S-955 Operating Manual

Specifications and Main Features

Frequently Asked Questions

User Manual