Toptech TT-S-925, T925 Operating Manual

OPERATING MANUAL

Caution:

Equipment damage hazard

Do not operate the cooling system if the outdoor temperature is below 50˚ F (10˚ C) to prevent possible compressor damage.

Thermostat Quick Reference Thermostat Operation Programming Contact Us and Warranty Registration

2 3 4 6

Congratulations on purchasing a new thermostat. This thermostat was

designed to the highest reliability and ease of use standards. Thank you for choosing Pro1.

Rev. 0950

Table of Contents Page

Need Help?

For assistance with this product please visit http://www.pro1iaq.com or call Pro1 Customer Care toll-free at 888-Pro1iaq (776-1427) during normal business hours (Mon-Fri 9 AM - 6 PM Eastern)

Una versión española de este manual puede ser descargada en www.pro1iaq.com

This manual covers TopTech models:

TT-S-925 and T925

THERMOSTAT QUICK REFERENCE

Battery information

Getting to know your thermostat

Fan Button

System Button

Temperature Setpoint Buttons

Menu Button

Glow in the Dark Light Button

Important:

The low battery indicator is displayed when the AA battery power is low. If the user fails to replace the battery within 21 days, the thermostat display will only show the low battery indicator as a final warning before the thermostat becomes inoperable. The batteries are located on the back of the thermostat.

On the back of the thermostat insert 2 AA Alkaline batteries (included).

Pull the thermostat directly away from the wall to access the batteries. A firm tug will be required to remove the thermostat from the subbase mounted on the wall.

+1 will appear in the

display when second stage of heat or cool is on.

+2 will appear in the

display when third stage of heat is on.

LCD

Displays the user selectable setpoint temperature.

HOLD is displayed when thermostat program is permanently overridden.

System operation indicators: The COOL, HEAT or FAN icon will display when the COOL, HEAT or FAN is on. EM.HEAT is only used if

heat pump is inoperable.

NOTE: The compressor delay feature is active if these icons are flashing. The compressor will not turn on until the 5 minute delay has elapsed.

Days of the week and time

Low Battery Indicator: Replace batteries when this indicator is shown.

Program Menu Options

Shows different options during programming.

Indicates the current room temperature.

Programmable Time Period Icons:

This thermostat has 4 programmable time periods per day.

Clean Display: Pressing CLEAN DISPLAY will allow 30 seconds to clean the display. The keys will be inoperable during this time. CLEAN will appear if your contractor has programmed a filter change reminder. Press CLEAN when filter has been replaced to reset the filter change reminder timer.

COOL HEAT FAN

THERMOSTAT OPERATION

Caution:

When the battery icon appears replace your AA batteries immediately. Failure to do so may result in your heating & cooling system becoming inoperable.

Easy to use controls

LCD Display:

See page 2 for details about this display read out and icons.

Glow in the Dark Light Button:

The glow in the dark light button will self illuminate for several hours after exposure to ambient light. This button turns on the display light when pressed.

Temperature Setpoint Buttons:

Press the

+ or - buttons to select the

desired room temperature.

User Keys:

Use these buttons to set up your programming options. Refer to the next page for instructions.

Fan Key:

Select ON or AUTO. The ON key will run the fan continuously. The AUTO key will cycle the fan on only when the heating or cooling system is on.

A Note About Programmable Fan:

The programmable fan feature will run the fan continuously during any time period it is programmed to be on. This is the best way to keep the air circulated and to eliminate hot & cold spots in your building.

System Key:

Selects the operation mode of your HVAC system. Selecting HEAT turns on the heat mode. Selecting COOL turns on the air conditioning mode. Selecting OFF turns both heating and cooling off. Selecting AUTO will turn the HEAT or COOL on as needed. EM HEAT will turn on emergency heat.

A Note About Auto Changeover:

Auto changeover will switch between heating and cooling as needed. It is very important to make sure the cooling setpoint temperature is at least 3º above the heating setpoint temperature and that the heating setpoint temperature is at least 3º below the cooling setpoint temperature.

PROGRAMMING THE THERMOSTAT

Set Time

Follow the steps below to set the current time:

Press MENU

Press SET TIME

Day of the week will be flashing. Use the or key to select the current day of the week.

Press NEXT STEP

The current hour is flashing. Use the or key to select the current hour. When using 12-hour time, make sure the correct a.m. or p.m. choice is selected.

Press NEXT STEP

Minutes are now flashing. Use the or key to select current minutes.

Press DONE when completed

Keypad Lockout Note:

If appears in display then the keypad is locked. All or some of the keys will not work. Hold the and keys for 3 seconds to remove the lock.

Important:

You will see a TECHNICIAN SETUP option after the MENU

key is pressed.

This TECHNICIAN SETUP key is for installer configuration and should NOT be changed unless you consult your Professional Heating and Air Conditioning Technician.

Set Program Schedule

To customize your 5+1+1 program schedule, follow these steps:

Weekday:

Saturday:

Sunday:

Select HEAT or COOL using the SYSTEM key. Note: You have to program heat and cool each separately.

Press MENU

Press SET SCHEDULE Note: Monday-Friday is displayed and the WAKE icon is shown. You are now programming the WAKE time period for the weekday setting.

Use the or key below the time setting to make your time selection for the weekday WAKE time period. Note: If you want the fan to run continuously during this time period, select ON with the FAN key.

Use the or temperature setpoint keys on the right side of your screen to make your temperature selection for the weekday WAKE period.

Press NEXT STEP

Repeat steps 4 through 6 for Saturday WAKE time period, for Saturday LEAVE time period, for Saturday RETURN time period, and for Saturday SLEEP time period.

Repeat steps 4 through 6 for Sunday WAKE time period, for Sunday LEAVE time period, for Sunday RETURN time period, and for Sunday SLEEP time period.

Repeat steps 4 through 6 for weekday LEAVE time period, for weekday RETURN time period, and for weekday SLEEP time period.

PROGRAMMING THE THERMOSTAT

Temporary and Permanent Hold Feature

Temporary hold: The thermostat will display

HOLD and RUN SCHEDULE on the bottom of your screen when you press the

key. If you do nothing, the temperature will remain at this setpoint temporarily until the next program period begins. Your program setpoint will then replace your temporary setpoint.

Permanent hold: If you press HOLD key at

the bottom of your screen, you will see HOLD appear below the setpoint temperature in the display. The thermostat will now permanently stay at this setpoint and can be adjusted using the

or keys.

To return to program: Press the RUN

SCHEDULE key at the bottom of your screen to exit either temporary or permanent hold.

Set 7 Day Program Schedule

Filter Change Reminder

If your installing contractor has configured the thermostat to remind you when the air filter needs changed, you will see FILT in the display when your air filter needs changed. FILT will be shown in the display after your system has run long enough to require an air filter change.

Resetting the filter change reminder: When FILT reminder is displayed, you should change your air filter and reset the reminder by pressing the CLEAN key for 3 seconds. FILT will leave the display when reset.

Hold down CLEAN for 3 seconds, to reset filter reminder.

To customize your 7 day program schedule, follow these steps:

Select HEAT or COOL using the SYSTEM key. You have to program heat and cool each separately.

Press MENU

Press SET SCHEDULE Note: Monday is displayed and the WAKE icon is shown. You are now programming the WAKE time period for the Monday setting.

Use the or key below the time setting to make your time selection for the weekday WAKE time period. Note: If you want the fan to run continuously during this time period, select ON with the FAN key.

Use the or temperature setpoint keys on the right side of your screen to make your temperature selection for the weekday WAKE period.

Press NEXT STEP

Repeat steps 4 thru 6 for Monday LEAVE time period, for Monday RETURN time period, and for Monday SLEEP time period.

Repeat steps 4 thru 7 for each of the remaining days in the week.

Warranty Registration:

Your new Pro1 thermostat has a 5 year limited warranty. You must register your warranty within 60 days of installation. You can register your new thermostat in 2 ways.

Go to www.pro1iaq.com, select warranty registration and fill out a short registration form.

- or -

Complete the form below and mail it to the address shown.

Name: ____________________________

Address: ____________________________

____________________________

City: ____________________________

State: ____________________________

Zip: _____________________

Thermostat Model: _____________________

Date Installed: _____________________

Pro1 IAQ Warranty Registration:

Pro1 IAQ Inc.

1111 S. Glenstone Suite 2-100 Springeld, MO 65804

Toll-free: 1-888-Pro1iaq (776-1427) Toll Number (Outside the USA): 330-821-3600 Web: http://www.pro1iaq.com Hours of Operation: Monday - Friday 9 AM - 6 PM Eastern

Complete form and mail to:

Pro1 IAQ Inc.

1111 S. Glenstone Suite 2-100 Springeld, MO 65804

Toptech TT-S-925, T925 Operating Manual

Specifications and Main Features

Frequently Asked Questions

User Manual