Top shelf Orthopedics Boa Universe Instructions For Use Manual

P/N: 025704 Rev A

topshelforthopedics.com

Phone: [phone] • Fax: [phone]

Tracy, CA 95304

1851 East Paradise Road, Suite A

Federal Law (USA) restricts this device for sale by or on the order of a licensed healthcare professional.

Caution:

for the period of six months from the date of purchase.

Top Shelf Orthopedics will replace all or part of the brace for defects in material or workmanship

Warranty:

any unusual reactions while wearing this product, consult your medical professional immediately.

intended for unsupervised public use. If you experience any pain, swelling, sensation changes, or

This product is to be used under the supervision of a medical health professional. This device is not

Warning:

soap residue may cause skin irritation and material breakdown.
Hand wash in cold water using mild soap. Rinse thoroughly and air dry. If not rinsed thoroughly,

Use and Care:

BOA UNIVERSE

Instructions for Use

Please read these instructions completely and carefully

before applying this product. Correct application is important

for proper function of this product.

BOA UNIVERSE

Instructions for Use

Please read these instructions completely and carefully before applying this product.

Correct application is important for proper function of the brace.

Indications: Acute & chronic low back pain, post-operative support, activity-related low back pain, disc herniation.
Contraindications: Pregnancy, circulation, pulmonary, cardiovascular or skeletal conditions which have the risk to be made worse as a

result of compression and/or pressure.

1.

BOA UNIVERSE 627 (Outside View)

Left Right

2.

BOA UNIVERSE 631 (Outside View)

Left Right

3.

BOA UNIVERSE 637 (Outside View)

Left Right

The BOA UNIVERSE is a modular back brace that allows for customization of
various components to address multiple conditions of the spine.

1. The BOA UNIVERSE 627 uses a low prole posterior rigid panel to provide support to

the lumbar region.

2. The BOA UNIVERSE 631 uses a tall posterior rigid panel to provide support to the lumbar
and thoracic region up to the level of T-9.

3. The BOA UNIVERSE 637 provides the maximum support both posteriorly and laterally to
the lumbar and thoracic region up to T-9 with the application of 3 rigid panel assemblies
to control motion in the sagital and the coronal plane.

Components of the Brace

* Pull handle with drawstring & size tag on left side.

Size Tag

Right Left

Inside View

Anterior End Components

Lateral Oval Panels (X2)

Image A

Image B (Inside View)

Right Left

Image C (Inside View)

Right Left

Image D (Outside View)

Sizing and adjustment of the BOA Belt assembly

1. Determine the size by measuring your waist (Image A). Over clothes at widest point.

2. Turn the belt assembly over to view the size markings on the undersurface.

3. Cut both sides of the belt assembly to the desired length based on the waist measurement
(Image B). NOTE: Cut the belt slightly longer than measurement. Test t and trim as needed.

4. Apply the end tab components and cover the trimmed edges with the elastic pouch (Image C).

5. The oval lateral rigid panels can be relocated where desired by the wearer with hook/loop tabs

affixing to the outer fabric of the belt panels (Image D).

Size Measurement

SM 25” - 30”
MD 30” - 35”
LG 35” - 40”

Pull

tab for

drawstring.

Front View Back View

XL 40” - 45”
2X 45” - 50”
3X 50” - 55” *

*(PART #510310 required for 3X size)

Application of BOA UNIVERSE

1. Apply the belt assembly, securing it with the hook and loop closure tabs on the end
components. (Adjust the lateral panels as necessary for position and function - BOA
UNIVERSE 637 only.)

2. Release the drawstring tab from the left side and pull it away from the body to the side,
advancing the drawstring tensioning device to the desired level of compression and comfort
for the patient.