Description:
1. Preliminary Product Specification:
1.1 Scope:
This Spec. provies an overview of the required RF remote control and receiver functionality for
Customer systems. The product includes:
- an RF Remote Control (2.4GHz)
- an USB Receiver dangle
- 2 AA batteries.
1.2 General:
1.2.1 Batteries: 2 AA batteries are designed to be used in RF remote to support at least 3
months normal usage.
1.2.2 Restricted Substances and Environmental Requirements: all the materials and
manufacturing process used to produce RF remote must comply to RoHS requirements.
1.2.3 RoHS (we can put some RoHS requirements here and state that all the materials used in
the product specification complies to RoHS requirements).
1.3 Ergonomics Requirements:
This product was designed to be ergonomics for all users.
1.3.1 The ergonomic remote design is to fit into users’ palms to reduce the discomfort caused
by long time usage.
1.3.2 The symmetrical design is to be fit for both left-handed and right-handed users to reduce
the discomfort or strain caused to users.
1.3.3 Every key designed on the remote is to be designed easy to reach for users for easy
usability and reduce strain.
1.4 Product Functional Requirements:
1.4.1 Operation System: needs to be functional when working under Customer systems.
1.4.2 Interface: Receiver needs to be working under USB 1.1 and 2.0 Interface.
1.4.3 Range Requirements: the transmission of the remote control shall be at least 30-50 meters
with optical filter in place.
1.4.4 RF Protocol: Using Topseed Standard RF protocol with HID Driver.
1.4.5 Frequency Range: 2.4 to 2.483 GHz (16 multi channels and 65535 ID channels for RF
Remote Control)
1.4.6 Battery Life: 2 AA batteries to provide at least 3 months normal usage.
1.4.7 Weight: 125.8g
1.4.8 Operation Temperature: 50℃