Topp Pro SOHO V4, SOHO V8, SOHO S10, SOHO S12, SOHO S15 User manual
TOPP PRO
NF04936
說明書-英西文
SOHO SERIES TOPP PRO_V1.0
SOHO S15
0.12KG /1
銅板紙
7
2017.05.08
14
SOHO V4 / SOHO V8
SOHO S10 / SOHO S12 / SOHO S15
Important Safety Instructions
10
2
19
9
TABLE OF CONTENTS
1. INTRODUCTION
2. FEATURES
3. USEFULL DATA
4. BACK PANEL DESCRIPTION
5. CONNECTION PLATE SYSTEM
6. CONNECTION PLATE
7. FREQUENCY RESPONSE DIAGRAM
8. WIRE CONNECTIONS
9. TECHNICAL SPECIFICATIONS
10. GUARANTEE
11. NOTES
4
4
4
5
8
11
12
14
15
18
19
18
3
1
Introduction
Thank you for choosing TOPP PRO. The new TOPP PRO MUSIC GEAR cabinets have been
designed to provide a cost effective high grade solution while maintainig high quality cabinet
construction and optimum components.
Our Professional Audio Products are designed and tested by a highly qualified engineering team
with more than 20 years of experience. Great care is placed in delivering products with excellent
performance, specifications and dependable reliability. Also great emphasis is placed in creating
and bringing to market products that can fill multiple applications and also offer customers
exceptional value.
Every TOPP PRO audio product is strictly tested and complied to very strict standards.
Features
SOHO S15
15
8
383
2
These series products include passive speaker cabinets, subwoofer, and complete packages.
A) PASSIVE SPEAKERS:
• SOHO V4
• SOHO V8
• FLX 5
B) SUBWOOFER:
• SOHO S10
• SOHO S12
• SOHO S15
C) PACKAGES:
• SOHO S10+V4 SYSTEM (SOHO S10 x 2 + SOHO V4 x 2)
• SOHO S12+V4 SYSTEM (SOHO S12 x 2 + SOHO V4 x 2)
• SOHO S12+V8 SYSTEM (SOHO S12 x 2 + SOHO V8 x 2)
• SOHO S15+FLX SYSTEM (SOHO S15 x 2 + FLX 5 x 2)
These products are design to provide a cost effective high grade solution, and they can be used
for all kinds of applications, such as churches, conference center, disco, etc. You can select right
model according to your request.
110-120V~50/60Hz, 220-240V~50/60Hz
22.1"(561.5mm) x 18.89"(480mm) x 20.47"(520mm)
28.3 kg / 62.4 lbs.
4
3
17
8
BACK PANEL DESCRIPTION
16
SOHO S10
(1) AC POWER SOCKET WITH MAIN FUSE.
(2) ON-OFF MAIN POWER SWITCH.
(3) SPK connector to satellite: Use pins + 1 positive / -1 negative
(4) CONVECTION FAN
(5) IP CONTROL
(6) THRU OUTPUT ON XLR CONNECTOR
This is a male XLR-type connector that produces exactly the same signal that is connected to
the main input jack or a mix of input1 and input2.
(7) Preset Selector: V4 / User (Custom Sound)
V4: Allow use this subwoofer with the 4 speaker satellite. Defaults Factory preset
User: Adjusts the Equalization according to the convenience of the user, depending on the
acoustics of the place and the implementation of the system. This setting can be performed
by a PC via LAN port, using a router for internet. This “preset” comes from factory set with the
parameters of the V4, after making the necessary changes you can be save into the system.
(8) SWITCH FOR FRONT LED ON OR OFF
(9) POWER. GREEN LED, INDICATE ON STATUS.
(10) SIGNAL / LIMIT, RED LED, INDICATE ON STATUS.
(11) INPUT2 ON COMBO CONNECTOR.
(12) LINE / MIC SWITCH(CHANNEL INPUT1 ONLY)
(13) LINE / MIC INPUT1 ON COMBO CONNECTOR.
(14) XLR AND 1/4” COMBO INPUT2
INPUT2 may accept Hi-Z sources (such as guitars) via the TRS 1/4” input, or line-level signal
via XLR.
NEVER connect the output of an amplifier directly to the input of the loudspeaker. This could
damage the input circuitry of the active loudspeaker.
(15) XLR AND 1/4” COMBO INPUT1
INPUT1 may accept a MIC or line-level signal via XLR or line-level signal via TRS 1/4” cable.
Be aware of the position of the MIC / line switch (12).
(16) RCA INPUTS (INPUT2 ONLY).
(17) INPUT1 / MIX SWITCH (THRU OUTPUT)
This switch allows you to choose whether only the input1 signal is sent out to the next
loudspeaker(switch out-input1) or mix of the input1 and input2 signals are sent out to the
next loudspeaker(switch in-Mix).
4
5
BACK PANEL DESCRIPTION
8
4
SOHO S12
(1) AC POWER SOCKET WITH MAIN FUSE.
(2) ON-OFF MAIN POWER SWITCH.
(3) IP CONTROL
(4) Preset Selector: V4 / V8 / User (Custom Sound)
V4: Allow use this subwoofer with the 4 speaker satellite. Defaults Factory preset
V8: Allow use this subwoofer with the 8 speaker satellite. Defaults Factory preset
User: Adjusts the Equalization according to the convenience of the user, depending on the
acoustics of the place and the implementation of the system. This setting can be performed
by a PC via LAN port, using a router for internet. This “preset” comes from factory set with
the parameters of the V4, after making the necessary changes you can be save into the
system.
(5) SWITCH FOR FRONT LED ON OR OFF
(6) THRU OUTPUT ON XLR CONNECTOR
This is a male XLR-type connector that produces exactly the same signal that is connected to
the main input jack or a mix of input1 and input2.
(7) POWER. GREEN LED, INDICATE ON STATUS.
(8) SIGNAL / LIMIT, RED LED, INDICATE ON STATUS.
(9) Input 2 Volume Control
(10) LINE / MIC INPUT1 ON COMBO CONNECTOR.
(11) LINE / MIC SWITCH(CHANNEL INPUT1 ONLY)
(12) XLR AND 1/4” COMBO INPUT1
INPUT1 may accept a MIC or line-level signal via XLR or line-level signal via TRS 1/4” cable.
Be aware of the position of the MIC / line switch (11).
(13) XLR AND 1/4” COMBO INPUT2
INPUT2 may accept Hi-Z sources (such as guitars) via the TRS 1/4” input, or line-level signal
via XLR.
NEVER connect the output of an amplifier directly to the input of the loudspeaker. This could
damage the input circuitry of the active loudspeaker.
(14) RCA INPUTS(INPUT2 ONLY).
(15) CONVECTION FAN
(16) INPUT1 / MIX SWITCH (THRU OUTPUT)
This switch allows you to choose whether only the input1 signal is sent out to the next
loudspeaker(switch out-input1) or mix of the input1 and input2 signals are sent out to the
next loudspeaker(switch in-Mix).
(17) SPK connector to satellite: Use pins + 1 positive / -1 negative
6
Loading...