PERSONAL GPS TRACKING SOLUTION
Contents Tables
1. Introduction .................................................................................... 1
2. What’s new? .................................................................................. 2
3. Main Features ................................................................................ 3
4. Applications ................................................................................... 3
5. Specification .................................................................................. 4
6. Start up .......................................................................................... 4
7. Get the position by calling the tracker ........................................... 6
8. Set the authorized number. ........................................................... 7
9. Get position by sending SMS command. ...................................... 8
10. Continuous tracking function ....................................................... 8
11. SOS function ................................................................................ 8
12. Listen in function .......................................................................... 9
13. Speeding alert .............................................................................. 9
14. GEO-FENCE ............................................................................... 9
15. Low battery alert .........................................................................11
16. Set the local time ........................................................................11
17. Modify the password .................................................................. 12
18. GPRS setting ............................................................................. 12
19. Displaying location on Google map ........................................... 13
20. Displaying location on your cell phone ...................................... 14
21. Real time tracking on website .................................................... 14
SMS commands list ......................................................................... 15
Cautions .......................................................................................... 21
1. Introduction
This tracker is a personal remote location device with small
size,build-in long standby time battery and easy to use.This
tracker can be used as an emergency cellular phone and allows
speed dialing 5 numbers for 2-way voice communication. This
tracker sends alert and call the preset numbers for immediate
assistance.The alerts include Date, Time, Coordinate, Speed
and Map URL link. It will send the coordinate to the designated
server by GPRS and then displaying the location by tracking
software.
1
2. What’s new?
2.1 Smaller size: As small as a car remote controller which can
be linked to the key chain.
2.2 It has ringing sound when there is an incoming call in 2-way
voice mode.
2.3 Vibration function: remind the user some function has been
triggered (It is very useful for blind person, elder)
2.4 Longer battery life (standby time is 100hours)
Position accurate will combine the GPS and GSM base station .
2.5 It can make a phone call by pressing a button.
2.6 Get position by 3 ways: Search the coordinate in Google
map, click the URL and see the position in cell phone directly
and view the position and history in tracking software.
2
3. Main Features
Locating and tracking via SMS or GPRS
Support voice call
Listen in function
SOS alert
Geo-fence alarm
Speeding alert
Low battery alert
Power saving mode
Vibration function
Combine the GPS coordinate and Cell ID (customer
should offer the base station data)
Position transmit
4. Applications
Protect the child/elderly/disabled/pet etc.
Personnel management
Track the vehicle/ equipment etc.
Provide peace-of-mind for businessmen
Tracking system for Express/Carriers/Logistics
3
5. Specification
Content Specs.
Dimension 65mm x 40mm x 18mm
Weight 56.4g
Network GSM/GPRS
Band 850/1900Mhz (2G&3G)
GPS sensitivity -159dBm
GPS accuracy 5-15m
Cold start 38 sec.
Warm starts 35 sec.
Hot start 1 sec.
Battery Chargeable 3.7V 1200mA/h
Operation temperature -20°C to +55°C
Humidity 5%--95% non-condensing
6. Start up
Do charge the battery for 8 -12 hours after first use. Then the
battery can be charged fully in 3 hours. In order to protect the
device please use the battery and charger come with the tracker.
4
There are blue and red lights under the ON/OFF button.
Switch on: Please take the unit outdoors or near the window.
Press the ON/OFF button till the lights blinking fast.
Switch off: Please press the power button till the two lights
blinking fast. It will take five seconds.
5
30 seconds after switching on, the unit will begin working and
each LED will blink as follow:
Blue
Red
Red(GSM) Work in SMS mode
Red(GSM) Connecting GPRS
Red(GSM) Work in GPRS mode
Blue(GPS) GPS valid
Blue(GPS) OFF GPS invalid
Blue light indicate GPS, Red light indicate Power, GSM, GPRS
ON
The device gets started
7. Get the position by calling the tracker
You can use the authorized numbers to call the tracker SIM
number for at least 2 seconds, and then hang up the call before
the tracker hangs up or receives it. The tracker will reply a
google position URL SMS. You can visit this URL to see the
position. The tracker will not reply the SMS If you did not hang
up the call before the tracker hangs up or receives it.
Note: The tracker will reply to any incoming call number if you
have not set the authorized numbers yet. Once you have set the
authorized number, the tracker will reply SMS to the authorized
6
numbers only.
Note: All the letters in any commands must be
English in capital and make sure there is no space in
the command.
8. Set the authorized number.
Totally, there are 5 numbers you can use.
SOS number: A1, A2, A3, Call number: A4, A5
Send SMS“123456A1,phone number” to set the 1
Send SMS“123456A4,phone number” to set the 4
st
number.
th
number.
E.g. send SMS “123456A1,+8613812345678” is to set
+8613812345678 as the first number. +86 is the country code of
China. Please do not use ‘00’ instead of ‘+’.
Delete authorized number: 123456A1,D (delete 1
st
number)
It doesn’t mean that you have to set all five authorized numbers,
but at least one authorized number. Then the device will only
accept the SMS commands from this particular authorized
numbers. Besides, you can set one phone number as A1 to A3.
So please set at least one authorized number before send other
commands. 123456 is the default password of the tracker and
we will take 123456 as the password to explain all the
commands in this document.
7
9. Get position by sending SMS command.
Send SMS “123456F” to the device and it will reply its position
by SMS, it will take some time if the gps signal is poor. Only the
authorized number can get the reply.
10. Continuous tracking function
Send SMS “123456M0/M1,xxxS/M/H” to the unit, the tracker
will reply the position message according to the time interval. If
the device has been connected to the server, the reply SMS will
be sent to the server only, which means the server has the
priority.
M0 means turn off, M1 means turn on
xxx means time interval and must be three digits, 030S means
30S.
S means second, M means minute, H means hour
H should be≤90, S,M should be <255
E.g. send“123456M1,030S” to the tracker means every 30
seconds send back a position coordinate to the A5 number.
Send“123456M0,030S” to stop the continuous tracking.
11. SOS function
It will send a SMS of “HELP ME ! + Position URL” to A1, A2, A3
authorized numbers if the SOS button is being pressed till the
RED LED blinking fast. A few seconds later, it will dial the 3
8
authorized numbers (A1, A2, A3) continuously for 30 times
(each number 10 times) till picking up.
st
number will take priority over the 2nd and the 3rd one. If
The 1
the tracker fails to connect to the 1
nd
one, In case the 2nd number fail to be connected too, it will
2
connect to the 3
rd
number, This will go on and on until one of the
st
number, it will switch to the
telephones picks up, then two-way communication starts.
12. Listen in function
If authorized numbers call the tracker or in the listen-in mode,
the sounds around the tracker can be monitored.
13. Speeding alert
Send SMS “123456J0/J1,Speed” to set the Speeding alert.
J1 means turn on; J0 means turn on.
Speed should be<250 and must be 3 digits.
E.g. send “123456J1,080” to tracker. When the speed exceeds
80 km/h, the unit will send SMS as “Over speed! +GPS IM” to
the A1,A2,A3 number. Send “123456J0,080” to tracker means
turn off this function.
14. GEO-FENCE
Send SMS “123456Ixyz,aabbccddefffgghhiijkkllmmnneppp
9
qqrrssj” to set up the geo-fence for the device to restrict its
movement within an area. The device will send the message to
the A1, A2, A3 numbers as “Stockade +geo IM” when it goes into
or out the area.
5 groups GEO-FENCE areas can be set for the tracker.
x is the NO. of GEO-FENCE(1-5)
y=1 means ON, y=0 means OFF
z=0 means go into, z=1 means go out
e=N means north latitude, e=S means south latitude
j=E means east longitude, j=W means west longitude
aa,bb,cc,dd,kk,ll,mm,nn,qq,rr,ss must be 2 numbers.03 means 3.
fff,ppp must be 3 numbers, 011 means 11.
E.g. The first Lat.51º11'35.25''N, Long.9º12'56.70''E
The second Lat.50º24'11.15''N, Long.:11º01'11.73''E
10
So the SMS command should be
“123456I1,1,1,51113525N009125670E50241115N011011173E”
15. Low battery alert
Send SMS “123456N1/0,xx” to set the low-battery alert.
N0 means turn off this function;
N1 means turn on this function.
xx should be <45 and must be 2 digits.
E.g. send“123456N1,30” to the tracker means when the battery
is lower then 30%,it will send an alert to the authorized number.
Send“123456N0,30” to the tracker means turn off the low battery
alert function.
16. Set the local time
Send SMS “123456L,time zone” to set the local time
‘+’ in the time zone means east, ‘-’ in the time zone means west.
Time zone must be 2 numbers.
11
E.g. send “123456L+08” to set the time to the Beijing time
send “123456L-08” to set the time to Los Angeles time
Note: Please send “123456L+05:30” to set the India time.
17. Modify the password
Send SMS “123456H******” to change the password.
Note: ****** is the New password. (Default password: 123456)
E.g. send “123456H456789” change the password to 456789
The password can’t be erased by changing SIM card, as all the
IM is recorded in the tracker, not sim card.
Please remember the password, otherwise you have to update
the software to default the setting. The password must be 6
digits so that the tracker can recognize it.
18. GPRS setting
Send SMS “123456B” to get the IMEI number of the unit.
E.g. send SMS “123456B”
Note: Before you execute the following GPRS connection,
please confirm that IMEI # has been registered.
In order to use GPRS function, the user needs to set APN
(Access Point Name), IP and Port by sending SMS commands.
Make sure that the SIM card in the tracker has the GPRS
function activated.
Send SMS “123456C$$$$,IP:Port” to set the APN, IP and port.
12
Note: Please get APN from your local GSM operators and the
APN is case sensitive. Ignore IP&Port if it is in the firmware.
E.g. “123456CCMNET”.CMNET is the APN of China Mobile.
Note: The APN should be in wap mode.
Send SMS “123456D” to turn on GPRS connection
Send SMS “123456E” to turn off GPRS connection
19. Displaying location on Google map
Go to http://maps.google.com and type in the latitude and
longitude like this: 22.7640801N,114.3975566E
Click search button, then you can see the position.
Download Google earth software from http://earth.google.com/
Type the coordinate: 22.7640801N,114.3975566E, click search.
Then you can see the position.
13
.
20. Displaying location on your cell phone
It will reply a location URL SMS like:
http://maps.google.com/maps?f=q&hl=en&q
=22.7647333,114.3978316&ie=UTF8&z=16
&iwloc=addr&om=1speed:000.0,&imei=012
207009017010
Click the URL, then you can see the location
21. Real time tracking on website
The device can be tracked on our
tracking platform, please contact
us for more information.
Note:
alternative from Tracking
website and PC software
14
SMS commands list
name Sentence content Description
Set
authorized
numbers
Sample of
setting
authorized
numbers
Delete
authorized
numbers
Switch to
the Talking
mode
123456A1,phone
number
123456A2,phone
number
123456A3,phone
number
123456A4,phone
number
123456A5,phone
number
123456A1,+861381
2345678
(‘A’ and the comma
must be English )
123456A1,D
123456A2,D
123456A3,D
123456A4,D
123456A5,D
123456U0
Calling in 2-way
voice mode
15
A1,A2,A3 is for setting the 3
SOS numbers.
A4,A5 is for the call center
number
Phone number must include
the country code like
+8613812345678. +86 is the
country code of China. Please
do not use ‘00’ instead of ‘+’
Set +8613812345678 as
the first SOS number (A1).
A1,A2,A3 is for deleting the
3 SOS numbers.
A4,A5 is for deleting the call
center number
The tracker will pick up the
incoming call then the call
center can talk to the driver.
Switch to
the Listen-in
mode
Switch to
the Listen-in
mode
Switch to
the Talking
mode
Calling out
automatically
Calling out
automatically
Get
position by
SMS
123456U1
(Default Mode)
Calling in listen-in
mode
123456U2
SOS Call in listen-in
mode
The tracker will pick up the
incoming call then the call
center can hear the sound
around the tracker.
When you make the SOS
call, just the call receiver can
hear the sound around the
tracker
123456U3
(Default Mode)
SOS Call in 2-way
The mode is 2-way voice
communication after hitting
the SOS
voice mode
123456V31,phone
number
Tracker will call this number
auto in listen-in mode
Calling phone
number in listen-in
mode
123456V30,phone
number
Tracker will call this number
auto in two-way voice mode
Calling phone
number in 2-way
voice mode
123456F It will reply the latitude and
longitude as well as a link to
the cell phone
16
Set
continuous
tracking
Sample of
Setting
continuous
tracking
123456Mx,yyyz x=1 means on, x=0 means
off
yyy means time interval. If
z=S/M it should be <=255.if
z=H, it should be<=090. It
must be three
numbers,030Smeans 30S
Z means time unit，z=S
means second, z=M means
minute, z=H means hour
123456M1,030S The tracker will reply the
position according to the time
interval you set (30 seconds).
If the tracker has connected
to server it will send to the
server by GPRS or it will be
sent to the cell phone by SMS
Set the
speeding
alarm
Sample of
setting
speeding
alarm
123456Jx,yyy x=1 means on, x=0 means off
yyy means the alarm
speed, it should be<250 and
must three digital, e.g.
080=80km/h.
123456J1,080 The tracker will send a
speeding alarm to server if it
is over the 80km/h
17
Set GEO
fence
Example
of setting
GEO fence
123456Ix,y,z,
aabbccddefffgghhiij
kkllmmnnepppqqrrs
sj
123456I1,1,1,511135
25N009125670E
50241115N011011173
E
18
x=NO. of the
GEO-fence(1-5),5 GEO fence
can be set
y=1 means on, y=0 means off
z=0 means go in, z=1 means
go out
e=N means the north latitude,
e=S means the south latitude
j=E means the east
longitude, j=W means the west
longitude
aa,bb,cc,dd,kk,ll,mm,nn,qq,rr,
ss must be 2 numbers.03
means 3.
fff,ppp must be 3
numbers.011 means 11
The tracker will send an
alarm data if it is in/out the
district you set.
Set the
time zone
Sample of
setting the
time zone
Set the low
battery alarm
Sample of
setting the
low battery
alarm
Modify the
password
Set the
APN,IP and
port
Sample of
setting the
APN
123456Lxyy x=+ means east x=- means
west
yy means the time zone，
must be 2 numbers
123456L+08 Set the east 8 zone
123456Nx,yy x=1 means on,x=0 means
off
yy means battery lower then
yy% then send the alarm. It
must be<45.it must be 2
numbers.
123456N1,40 The tracker will send a low
battery alarm if the battery is
lower then 40%
123456H456789 456789 is the new
password, new password
must be 6 numbers
123456C$$$$,IP:P
ort
$$$$ is the APN, you can
get the APN from your local
GSM provider.
123456CCMNET,
119.122.101.91:9289
CMNET is the APN of
China mobile.
19
Set the
username
and
password for
APN
Sample 123456Ointernet,in
Open
GPRS
Close
GPRS
Get the
IMEI number
Check the
settting
123456O&&&&,
@@@@
ternet123
123456D The tracker will start to
123456E The tracker will close the
123456B It will reply the IMEI number
123456G Check all parametres set
20
&&&& is the username and
@@@@ is the password.
If the SIM card doesn’t
need username and
password for the APN, pls
ignore this command
The user name is internet
and the password is
internet123.
connect the server by GPRS.
It will send back an SMS to
confirm after it has connected
the server successfully.
connection with the server.
of the tracker.
in tracker
Cautions
Please comply with the instructions to extend the unit life:
1. Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy
or damage the inside circuitry.
2. Don’t use & store the unit in dusty places.
3. Don’t put the unit in overheated or overcooled places.
4. Handle carefully. Don’t vibrate or shake it violently.
5. Clear the unit with a piece of dry cloth. Don’t clean in
chemicals, detergent.
6. Don’t paint the unit, this may cause some foreign materials left
in between the parts.
7. Don’t disassemble or refit the unit.
8. Please use the battery and charger provided by manufacturer.
Using other batteries and chargers will cause unwanted
situation.
9. Don’t dismount the antenna randomly, or use other antennas.
This maybe interfere the transmission, and increase the
radiation as well.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.
21
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.
Specific absorption rate (SAR)
This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set
by the Federal Communications Commission of the U.S.
Government. The exposure standard for wireless devices
22
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6 W/kg
Body-worn Operation
This device was tested for typical body-worn operations. To
comply with RF exposure requirements, a minimum separation
distance of 0.5 cm must be maintained between the user’s body
and the handset, including the antenna. Third-party belt-clips,
holsters, and similar accessories used by this device should not
contain any metallic components. Body-worn accessories that
do not meet these requirements may not comply with RF
exposure requirements and should be avoided. Use only the
supplied or an approved antenna
23
Loading...