Page 1
TP-6 SERIES
Page 2
General
New TP-6 series consist of Color CCD
camera TP-6003C and B/W CCD Camera
TP-606B, TP-608BK.All of them use high
sensitive 1/3" interline transfer CCD (Charge
Couple Device). advanced Video Drive/Direct
Drive (V.D./D.D.) switch, Back Light
Compensation (B.L.C.), Level adjustment on
back panel, Electronic Shutter (E.S.) Their
attractive and unique body design as well as
complete functions are the reasons for their
high Competence in the CCTV field.
TP-6 series is suitable for industrial and
consumer use.................................................
1
Page 3
Features
(1)V.D./D.D. Switch
For Video drive auto iris lens, please set
switch to V.D. For Direct Drive iris lens, set
switch to D.D.
(2)Back Light Compensation(B.L.C.)
Normal function is for the regular circumstance. B.L.C. function is for the better back
light treatment in bright back area.
(3)Built-In microphone
High sensitivity built-in audio function is
applied as a standard feature.
(4)AES on/off switch
To select manual lens or auto iris lens
under different circumstance. Selection of
manual iris lens will save the cost of lens
and even keep the similar functions like
auto iris lens.
(5)Level adjustment
When switch to D.D, use level adjustment
to take a clearer picture in bright and dark
areas.
2
Page 4
Precautions
(1)To protect camera, do not expose the
device to humidity and dust.
(2)Handle the camera with care
This camera consists of sensitive
highprecision parts. Do not place it in a
location subject to vibration or on an
unstable base.
(3)CCD sensor consists of sensitive highpre-
cision. Do not touch it by hand directly.
(4)When the device is not in use, please put
the lens mount cap on the lens.
(5)Please avoid to install the camera directly
toward the strong light source, such as sun,
spotlight...etc.
3
Page 5
Precautions
4
Compositions
(6)Projection of the lens or other piece of
optical equipment must be less than 6mm
from the lens mount face.
(7)In case the camera with any defect, please
inform the qualified service person. Don't try
to disassemble the camera by yourself.
Camera...........................................................1
Iens mount cap...............................................1
L-shape wrench..............................................1
Instruction manual..........................................1
C Mount 5mm Adaptor ring............................1
Warranty Card................................................1
Page 6
Function of parts and wiring
(1)Lens mount
Use CS mount lens or C mount lens with
the attached 5mm adaptor ring.
(2)Video signal output connector (BNC
connector)
Connect to CCTV monitor by using a
coaxial cable.
(3)V.D./D.D. Switch
Switch to Video Drive (V.D.) for auto iris
lens w/EE AMP. Switch to Direct Drive
(D.D.) For auto iris lens w/o EE AMP.
(4)Auto iris connector
Connect the cable from auto iris lens to the
pin no. 1 to 4 on camera according to the
following Instruction.
5
Pin V.D.
1. DC 12V
2. Iris out
3. N.C.
4. GND
D.D.
Control Control +
Drive +
Drive -
Page 7
Connections
6
(1) Single Connection (one camera to one
CCTV monitor)
(2) Multiple Connection (plural cameras to one
CCTV monitor)
Page 8
Operation & adjustment
7
(1)Install lens to the camera.
(2)Connect a cable between camera and
CCTV monitor and then turn on the power of
switch of each device.
(3)To obtain the best picture, adjust the focus
and the diaphragrm while observing the
image plane.
(4)Back focus adjustment
If the subject is not in focus after adjusted
the focus of lens, it's need to make the back
focus adjustment. First, set the focus ring of
lens to the widest position and take picture of
the subject at a distance of 20m away from
camera.
Second, loosen the screw at the front panel
by L-shape wrench. Then, turn the lens and
mount at the same time. So the subject will
be in focus. Finally, secure the screw firmly.
Page 9
Specifications
PICK UP DEVICE
PICTURE ELEMENTS
SYNC SYSTEM
HORIZONTAL RESOLUTION
MINIMUM ILLUMINATION
WHITE BALANCE
POWER SOURCE
VIDEO OUTPUT
DIMENSIONS
WEIGHT
LENS MOUNT
B.L.C.
AUDIO
ELECTRONIC SHUTTER
IRIS CONTROL
S/N RATIO
1/3" Interline Transfer CCD
NTSC: 510(H) x 492(V)
PAL: 500(H) x 582(V)
Internal sync
1.0Vp-p, 75 ohm
58
DC TYPE: 270g
DC/AC: 500g
AC TYPE: 500g
450 TV lines
0.4 Lux/F1.2
CS mount or C mount
with 5mm adaptor ring
Preset Auto White Balance(A.W.B)
Back Light Compensation, on/off switch
Built-in high sensitive microphone
1/60(1/50) to 1/100,000 (1/100.000)
on/off switch
Video/Direct Drive A.I. Switch
DC 12V 10% or DC 12V/AC 24V
compatible or AC 90~265V (Optuonal)
50dB
(W) x 50(H) x 106(D) mm
8
TP-6003C
Page 10
Specifications
PICK UP DEVICE
PICTURE ELEMENTS
SYNC SYSTEM
SCANNING SYSTEM
SCANNING FREQUENCY
HORIZONTAL RESOLUTION
MINIMUM ILLUMINATION
LENS MOUNT
POWER SOURCE
VIDEO OUTPUT
STORAGE TEMPERATURE
WORKING TEMPERATURE
DIMENSIONS
WEIGHT
S/N RATIO
ELECTRONIC SHUTTER
IRIS CONTROL
B.L.C.
AUDIO
POWER CONSUMPTION
1/3"Interline Transfer CCD
NTSC: 510(H) x 492(V)
PAL: 500(H) x 582(V)
Internal sync
2:1 INTERLACE
EIA: H: 15.734 KHz V: 69Hz
CCIR: H: 15.625 KHz V: 50Hz
TP-606B: 480 TV lines,
48dB
TP-606B: 0.04 Lux/F1.2
TP-608BK: 0.25 Lux/F1.2
CS mount or C mount
1.0Vp-p, 75 ohm
-40 to + 60
-10 to + 60
60(W) x 50(H) x 106(D) mm
DC TYPE: 270g DC/AC: 500g
AC TYPE: 500g
TP-608BK: 460 TV lines
1/60(1/50) to 1/100,000 (1/110.000)
on/off switch
Video/Direct Drive A.I. Switch
with 5mm adaptor ring
Back Light Compensation, on/off switch
Built-in high sensitive microphone
DC 12V 10% or DC 12V/AC 24V
compatible or AC 90~265V(optional)
Approx. 3.3 W
(including auto iris power consumption)
9
TP-606B TP-608BK
Page 11
Dimensions & parts location
VIDEO
VIDEO
LEVEL
LEVEL
LEVEL
LEVEL
VIDEO
VIDEO
1. AES
2. BLC
3. F.L.
4. AGC
5. L.L.
1. AES
2. BLC
1. AES ON
2. BLC OFF
1. AES
2. BLC
DC12V
+
-
DC12V
+
-
AC TYPE (L.L.)
AC TYPE
DC TYPE
DC TYPE
TP-6003C
TP-6003C
TP-606B/TP-608BK
TP-6003C
TP-606B/TP-608BK
10
1. DC12V
2. IRIS OUT
3. N.C.
4. GND
1. DC12V
2. IRIS OUT
3. N.C.
4. GND
1. DC12V
2. IRIS OUT
3. N.C.
4. GND
1. DC12V
2. IRIS OUT
3. N.C.
4. GND
AC IN
AC IN
1
2
Page 12
Dimensions & parts location
106 mm
50 mm
58 mm
11
VIDEO
LEVEL
1. AES
2. BLC
DC/AC TYPE
TP-6003C
TP-606B/TP-608BK
1. DC12V
2. IRIS OUT
3. N.C.
4. GND
AC24V/DC12V
Page 13
Loading...