TOPENS DPS180-U User Manual

User Manual of the AC-DC Power Supply

Model: DPS180-U

Thank you for your purchasing of the 24VDC 150W AC-DC power supply. The AC-DC power supply can

be used as power source for the TOPENS swing gate opener as well as the other 24VDC electrical

appliance. The wire connection is very convenient because of the plug & play design.

Specifications:

Input: 100-240V~ 50/60Hz Rated output voltage: 24VDC

Rated power: 150W Peak power: 180W IP degree: IP65

Features:

Over-load protection, Over-current protection, Short circuit protection, Over-heat protection

Wire Connection of the Power Supply

Firstly please connect the output of the power supply to the electrical appliance. It can be wired to the

TOPENS swing gate opener by plug the output wire to the control box. Please note that the polarity must

be connected correctly or it may damage the control board (Red wire is positive and yellow wire is

negative). You can attach it to the gate opener refers to the wiring diagram in the user manual of the gate

opener. Finally plug the AC cable to the AC main socket to power on the power supply.

NOTE: The DPS180-U power supply is used to replace the batteries when it’s used for TOPENS

gate opener. You should attach it to the +BAT- terminals of the control board directly and you

can’t connect the batteries to the +BAT- terminals at the same time.

NOTE: Always ask the help of professional technician /electrician if you have any question.

TOPENS Website

www.topens.com

Any question, please do not hesitate to contact us:

E-mail: [e-mail]

Kindly include your Product Model, Purchasing Date & Site, Order #, and your contact

information. All your concerns will be replied within 24 hours.

Tel: [phone] (China)

Mon-Fri 9:00AM-5:30PM (UTC +08:00)

C030474 VER21a