Topeak Shock'n'Roll User Manual
Shock 'n Roll
User's Guide
GB
1
2
4
5
1
Air Release Button (works with Schrader Valve only)
2
Dial Gauge (0-300 psi/ 0-20.7 bar)
3
8
Rotating Hose
3
Ination Mode Selection
MTB TIRE mode SHOCK/FORK mode
4
High polish Aluminum Barrel
5
6
7
6
Hose Dock
6
SmartHead
7
™
ThreadLock ts both Presta and Schrader valves
Schrader Mode
Presta Mode
Vent Hole *
8
* NOTE of Vent Hole
A small amount of air pressure will escape from the vent hole
when inflating suspension fork or rear shock. It's normal and
won't affect inflation.
DO NOT block the vent
hole while inflating in
Shock Mode.
Doing so will adversely
affect inflation.
NOTE
• Before using Shock 'n Roll to inflate your suspension fork or rear shock,
check and do not exceed factory recommended pressures.
• Make sure to choose the correct Inflation Mode (Tire Mode or Shock Mode)
before engaging pump valve to the valve stem. DO NOT switch Inflation
Mode when the pump valve is still engaged on valve stem to avoid the
leakage of air.
TIRE MODE
Shock 'n Roll
User's Guide
For Schrader valve
For Presta valve
MTB TIRE mode
SHOCK MODE (Schrader mode)
ENGAGE
SHOCK/FORK modeMTB TIRE mode
Twist the barrel to Shock Mode.
Schrader Mode
Presta Mode
Presta valve as example
DISENGAGE
WARRANTY
2-year Warranty: All mechanical components against
manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your
original sales receipt. Items returned without a sales
receipt will assume that the warranty begins on the
date of manufacture. All warranties will be void if the
product is damaged due to user crash, abuse, system
alteration, modification, or used in any way not
intended as described in this manual.
* The specifications and design are subject to change
without notice.
Please contact your Topeak dealer with
any questions.
For USA customer service
call : 1-800-250-3068
www.topeak.com
Copyright © Topeak, Inc. 2012
M-TSNR-1-GB 03/12
Loading...