Topeak JoeBlow Booster operation manual

JOEBLOW™ BOOSTER

User's Guide

CHARGE MODE

INFLATE MODE

• 160 psi / 11 bar

• Please read the instruction before first use.

HOW TO INFLATE TUBELESS TIRE

1STEP

1.1 1.2

Top Mount Gauge +
Mode Selector

Air Release Button

Air Chamber

2STEP 3STEP

GB

SmartHead™ Valve

fits Presta and Schrader
valve

Extra Long Hose

Follow tire manufacturer's
recommended installation
instructions for tubeless

tires.

Tighten valve and
ensure tubeless tire
has been installed
correctly before
inflation.

Engage the valve and turn to
CHARGE mode.

DO NOT squeeze tire when
engaging pump head.

4STEP 5STEP

Turn to INFLATE mode then a strong blast of air will inflate the tire at the same time. If
the installation is perfect, the bead of tire will snap into the rim as shown during inflation.

NOTE

If inflation fails, deflate tire and check tire installation, rim and valve. Follow inflation sequence to install and
inflate tire correctly.

Pump and store air in Air
Chamber.

Pump to 160 psi/ 11 bar
for best results.

Continue to pump to desired pressure
immediately. Press the Air Release Button
to adjust the pressure as necessary.

JOEBLOW™ BOOSTER

HOW TO INFLATE NORMAL TIRES

User's Guide

1STEP

Turn to INFLATE mode.

WARNING

1

There are two common reason for
inflation failure.

Tire was not
installed properly.

Valve was not
tightened sufficiently.

GAP

2STEP

Engage the valve.

2

DO NOT turn Mode Selector to
mid-point between modes. The
pump will not function properly
and the gauge will display "0 psi/
0 bar.

3STEP

Pump to desired pressure. Press the Air
Release Button to adjust the pressure
as necessary.

3

Release air and turn mode selector
to INFLATE after each use. For
safety reasons, DO NOT store
pressurized air in Air Chamber when
not in use.

4

To avoid injury, turn Mode
Selector carefully.

DO NOT exceed the maximum air pressure of your tubeless tire. Follow tire manufacturer's

6

recommended installation instructions for tubeless tires.

RECOMMENDED

OPERATING POSITION

5

DO NOT squeeze tire when
engaging pump head as it may
separate tire and rim and prevent
a good seal when inflating.

WARRANTY

2-year Warranty: All mechanical components
against manufacturer defects only.

Warranty Claim Requirements

To obtain warranty service, you must have
your original sales receipt. Items returned
without a sales receipt will assume that the
warranty begins on the date of manufacture.
All warranties will be void if the product is
damaged due to user crash, abuse, system
alteration, modification, or used in any way
not intended as described in this manual.

* The specifications and design are subject
to change without notice.

Please contact your Topeak dealer with
any questions. For USA customer service,
call: 1-800-250-3068
www.topeak.com

M-TJB-BST-GB 11/15

Copyright © Topeak, Inc. 2015