![](/html/88/88dd/88dd9b51fd22a7083a6466c0e039573491cf83f069d29807c69d983f0fa09fc8/bg1.png)
DUOBAND HEART RATE MONITOR
• Heart rate monitor will turn on automatically when attached to chest strap.
• When heart rate is sensed, LED indicator will blink 60 times. (LED will automatically turn off)
• Heart Rate Monitor will turn off automatically when removed from the chest strap.
Sensing Indicator
Green Light
Blinking 60 times
Low Battery
Indicator
Heart Rate Monitor Sensor
Red Light
Blinking 60 times
Chest Strap Button
Chest Strap
HOW TO WEAR HEART RATE MONITOR
1 2 3 4
Battery Cover
Electrode areas
Tech: Bluetooth® Smart, ANT+ super low energy technology,
Dual Band System
Fit Chest: 70-120 cm / 27.5”`47.2” | 100-150 cm / 39.4”-59”
Battery Lifetime (approx): 900 hr
Battery: CR2032 x 1 pc (included)
Transmission Range: < 5 meter (16.4 ft)
Waterproof: IPX 7
Operation Temperature: -10ºC ~ 50ºC (14ºF ~ 122ºF)
Weight: 46 g / 1.62 oz (strap+monitor)
User's Guide
ANT+ system for Garmin or other
devices.
Sync to PanoBike+ App and other
Apps with Bluetooth® Smart (BLE
4.0) connection program.
SPECIFICATION
(with optional chest strap extension)
EN
Attach the Heart Rate Monitor to
the chest strap buttons.
TOPEAK PANOBIKE+ APP
The ultimate cycling performance app just got better. The PanoBike+ has additional
functionality that transforms your smartphone’s powerful Bluetooth® Smart capabilities
into a bike computer, personal trainer, health management, and social media upload
device. The new PanoBike+ app can upload your ride details to Strava and share it on
Facebook, and the Dual Mode Technology allows you to use either your smartphone
during your ride, or use a compatible PanoComp X bike computer during your ride and
sync your phone afterwards to upload and analyze your ride data. By combining the
Sync to PanoBike+
App and other Apps
with Bluetooth® Smart
(BLE 4.0) connection
program.
functions of an enhanced cycle computer and heart rate monitor (requires optional
DuoBand Speed & Cadence Sensor and DuoBand Heart Rate Monitor) in a single app,
you get the most out of your bike ride.
iOS 8 or above
(Download for Free)
Slightly moisten electrode areas on the
chest strap. (If necessary)
Android OS 4.3
or above
(Download for Free)
Adjust strap length and wrap around chest.
Insert clasp to strap end. Make sure chest
strap is fastened on your body properly.
CHANGING BATTERY
Operation Time up to
900 hr. / 2.5 yr.
TIPS:
To maximize battery life, dry
and detach Heart Rate Monitor
sensor from the chest strap
after use.
OPTIONAL AND RELEVANT ACCESSORIES
PanoBike
Chest Strap
MAINTENANCE OF CHEST STRAP
1. Detach the Heart Rate Monitor and rinse the chest strap under running water after each use and dry it
with a soft towel. Never use alcohol or any abrasive material. Clean the chest strap with mild soap and
water solution when needed.
2. Do not stretch the chest strap or bend the electrode areas sharply.
3. Do not soak, iron, dry clean or bleach the chest strap.
4. Do not twist the chest strap.
5. If you use fragrance, sunscreen, or insect repellent,
you must ensure that it does not come into contact
with the Heart Rate Monitor.
Care Symbols for HRM chest strap
FCC INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or
operating in conjunction with any other antenna or transmitter.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment
WARNING
1. Do not store Heart Rate Monitor in damp environment or non-breathable material (such as sports bag),
nor with conductive material (a wet towel).
2. Do not expose the Heart Rate Monitor to direct sunlight for extended periods.
3. Pacemaker users should never use this device.
* Bluetooth® is a registered trademark of Bluetooth SIG, Inc. * App Store is a service mark of Apple Inc. * VIRB® is a registered trademark of Garmin Ltd. * ANT+ is a registered trademark of Dynastream Innovations Inc.
Manufacture : ALATECH TECHNOLOGY
Art No. TPB-HRM03
TPB-HRM04
(25cm extension)
NCC INFORMATION
Administrative Regulations on Low Power Radio Waves Radiated Devices warning:
• Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance
transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices.
• The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the
user shall cease operating immediately until no interference is achieved.
• The said legal communications means radio communications is operated in compliance with the Telecommunications Act.
• The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio
wave radiated devices.
WARRANTY
2-year Warranty: All electronic and mechanical components against manufacturer defects only.
Batteries are not covered under any implied warranty.
1-year Warranty: The Chest Strap against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items returned without a
sales receipt will assume that the warranty begins on the date of manufacture. All warranties
will be void if the product is damaged due to user crash, abuse, system alteration,
modification, or used in any way not intended as described in this manual.
* The specifications and design are subject to change without notice.
Please contact your Topeak dealer with any questions.
For USA customer service call: 1-800-250-3068
www.topeak.com
Copyright © Topeak, Inc. 2016 M-TPB-HRM05-EN 11/16
Ensure the electrodes are pressed firmly against
your skin. The sensor should be centered on your
chest with the DuoBand logo in the upright position.
+
CR2032
-
DuoBand
Speed & Cadence
Sensor
Art No. TPB-SC03
FCC ID:R3S-HRM05
MODEL:TPB-SC03
Made in Taiwan
RideCase series
211-160911
CCAG16LP0270T0