Tool required: 4 mm Allen key
thickness 60 mm
Press to
install / release
(Front)
thickness 60 mm
DeFender
Wedge Set
Locking Lever
DeFender™ M3 fits
most standard front
forks. However, it will
not fit forks with a
crown thickness over
60 mm (2.36") and is
not designed to be
used with the 1.5"
headset standard.
™
M3
(Rear)
User's Guide
GB
A.
Fits ø 27.7~ ø35 mm
B.
Fits ø19.6 ~ ø26 mm
CAUTION
Do not disassemble
the rear part.
INSTALLATION
Recommended
Torque:
2-4 Nm
4mm
Allen key
Front
Make sure the wedge set is
inserted in the right direction
and locked as close to the fork
crown as possible. Improper
installation will cause damage
to DeFender™ M3 and may
cause bodily harm.
LOCK
LOCK
CLICK
WARRANTY
2-year Warranty: All mechanical components against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty begins on the date of
manufacture. All warranties will be void if the product is damaged due to user crash, abuse, system alteration, modification, or used in any way not intended as
described in this operating manual.
* The specifications and design are subject to change without notice.
Please contact your Topeak dealer with any questions. For USA customer service call : 1-800-250-3068 , www.topeak.com
Copyright © Topeak, Inc. 2011
M-TC9622-23-GB 06/11
W
h
e
e
l
S
u
s
p
e
n
s
i
o
n
T
r
a
v
e
l
W
h
e
e
l
S
u
s
p
e
n
s
i
o
n
T
r
a
v
e
l
Tool required: 3 mm / 5mm Allen key
Release Button
Reversible Rear
Fender Tab
Strap Pin
DeFender
™
M33
User's Guide
GB
ANGLE ADJUSTMENT
Fixing Knob
Angle Adjusting Bolt
The Revsersible Rear Fender Tab
accommodates a wide range of
frames sizes and seat tube angles
to suit different needs. Make sure
to choose the best mounting
position for your 26" MTB.
POSITION 1
(Preset)
POSITION 2
5mm
Allen key
WARNING
Adjust the angle of DeFender™ M33 by loosening the angle
adjusting bolts and retightening the bolts once the correct
angle is achieved. To prevent disassembly and possible
damage, DO NOT loosen the bolt completely.
Recommended
INSTALLATION
Release locking lever and strap pin Close locking lever to fasten
Pull up and
turn fixing
knob to adjust
strap length
Engage strap pin with locking lever
until a "CLICK" is heard
CLICK
PUSH DOWN
PUSH DOWN
fixing knob to fix
strap position
DeFender™ M33 onto seatpost
REVERSIBLE REAR FENDER TAB INSTALLATION (POSITION 1 TO POSITION 2)
Press release
button to
remove fender
3mm Allen key
Torque:
2-4 Nm
CLICK
Rear Fender
Tab
POSITION 1
(Preset)
Reverse Rear
Fender Tab
POSITION 2
For Rear Suspension Bike
When adjusting the angle of DeFender
WARNING
™
M33, make sure the clearance between
DeFender™ M33 and the tire is larger
than wheel suspension travel of the
bike. Incorrect clearance may cause
damage to DeFender™ M33, your bike,
or potentially cause bodily harm.
Loading...