TOORX TRX8500 Instruction

INSTRUCTION

Ed : 10/18 Rev : 00 Cod : TOXPRFTRX8500

UNPACK AND VERIFY THE CONTENTS OF THE BOX:

Silicon oil bottle

Hardware bag

说明书

Owner’s mannul

Right upright post
Plastic center parts of console

Left clamp ring

Right clamp ring

Console

Platform frame

Left upright post

●Lift up and remove the box that surrounds the Treadmill.

●Check the following items are present. If any of the parts are missing, contact with the dealer.

6

Main parts

Side rail

Running belt
Front roller

Incline motor

Motor belt

Plastic central parts of console

Rear cover

Motor cover
Running deck

Rear roller

Motor

Console

7

Hardware bag

1817

26

Allen C.K.S. Full thread screw

M8*15

Allen C.K.S. Full thread screw

M8*25

T shaped wretch

8×75

L Allen wrench

6×35×80

L Allen wrench

5×35×85S

8

Treadmill introduction

Working voltage

AC220V 50Hz

Dimension

2015*915*1595mm

Running surface

1560*580mm

Speed range

1.0－22.0Km/h

Console

Motor cover

PU handle bar

Rear cover

Running belt

Side rail

Upright post

Incline frame

Feet pad

9

Technical Information：

*WE RESERVE THE RIGHT TO AMEND THE PRODUCT WITHOUT PRIOR NOTICE.

10

Step 1: Take out the machine from box and put it on the flat floor. Remove the screws on the left, right and front sides of the motor

ASSEMBLY INSTRUCTIONS

cover. Remove the motor cover.(As shown)

Step 2:

cables which on right upright post and platform.Last, fix the right upright post with 4pcs Allen C.K.S. half thread screws M8*20.

Note: All screws should not be locked tightly.

Fix the left upright post on platform with 4pcs Allen C.K.S. half thread screws M8*20. And then connect the communication

11