TONO OWTNNPAS10 Operating Instructions Manual
Portable
PA Speaker
OWTNNPAS10
REMOTE
CONTROL
RECEIVER
DISPLAY WINDOW
USB
SD CARD
MODE
AUTO FM
REPT
POWER
MIC
GUI
MIC/PRIORITY
OFFON
OPERATING INSTRUCTIONS
Connecing the speaker unit
i. Connect one end of the supplied AC/DC power adaptor to the AC wall socket and the other end to the
‘DC-IN’ socket on the unit. Press down the power buton to turn on the unit, press once again the buton
will pop up and turn of the unit.
MUSIC
VOL
BASS
TREBLE
ECHO
MIC. VOL
GUITAR
VOL
DC 15V
INPUT
AUDIO
INPUT
MIC/Priority
Pushing down this button will
prioritise all sounds from MIC
channel while muting sounds
from GUI input.
POWER
STOP
VOLUME +
PREVIOUS
FM CHANNEL
REPEAT
PREVIOUS
SONG
STANDBY
1 2 3
4 5 6
7 8 9
0 10+
STOP
CH- CH+
REPE
INPUT
AUTO
MUTE
VOL +
EQ
VOL -
Repeat feature only
available in USB/SD card
play mode.
MODE
AUTO SCAN FM CHANNELS
SELECT SONG # ABOVE 10
MUTE
NEXT FM CHANNEL
EQ
VOLUME -
NEXT SONG
PLAY/PAUSE
Using AUX INPUT
i. Using a 2xRCA to 3.5mm audio cable (not included), simply match the coloured RCA plugs to the
sockets on the unit control panel. Then plug the 3.5mm audio plug into your music device.
Using a Wired Microphone (not included)
i. Plug your wired microphone cable into the microphone input ‘MIC’ on the unit control panel.
ii. Use the ‘M.VOL’ control to adjust the volume level of the microphone.
iii. Use the ‘ECHO’ control to adjust the microphone echo efect.
Using the Guitar Jack
i. Plug your guitar cable into the ‘GUI’ input on the unit control panel.
ii. Use the ‘Guitar Vol’ control to adjust the volume level of the guitar.
Portable
9
PA Speaker
OWTNNPAS10
Using the Wireless Microphone (included)
i. Insert 2 x ‘AA’ bateries (not included) into the base of the wireless microphone.
ii. Switch on the wireless microphone using the ‘ON/OFF’ switch — this microphone is designed to be
used together with this unit only.
iii. Switch on the speaker unit power.
iv. The wireless microphone will automaically work once speaker unit and microphone have been
turned on, regardless of which ‘MODE’ has been selected.
Listening to FM Radio
i. Press the ‘MODE’ buton on unit control panel or press INPUT on the remote control to select FM mode.
ii. From the unit control panel, long press ‘Play/Pause’ buton to scan for staions (this will
automaically preset the staions in your area)
Using Bluetooth
i. Press the ‘MODE’ buton on the unit control panel or remote control unil the word ‘BLUE’ shows on
the display.
ii. In your Bluetooth seings on your smartphone, tablet or notebook search for “OWTNNPAS10”
device and pair the speaker to your device. You are now able to listen to your audio iles through
your speaker.
iii. Disconnect the Bluetooth device pairing when you have inished listening to your audio iles.
Playing MP3 iles through the speaker using the SD card
or the USB sick
i. Turn of the unit and plug in your USB sick or SD Card into the appropriate port on the back side of
the unit. Please ensure that your media is properly connected and that your iles are MP3 format.
When you turn on the unit, it will automaically select the input device.
ii. Disconnect AUX INPUT while playing SD/USB iles.
REMOTE CONTROL FUNCTIONS
• Press MODE on the unit or INPUT on the remote control to change the modes (FM, Audio,
Bluetooth, USB/SD card, Line)
• To skip a track, press on the unit or remote control.
• To listen to a previous track, press on the unit or remote control.
• To pause a track, press on the unit or remote control. To restart play, press again.
• To repeat songs, press the REPE buton, it will repeat by mode of ALL/ONE/FOLD/RAN.
FOLD means songs in the same folder. RAN means songs in a random order. This only works with
USB/SD card mode.
• To use built-in Equalizer, press the ‘EQ’ buton to scroll through the opions unil you ind your
desired sound seings*. EQ applies to USB/SD Card and Bluetooth play mode.
(i.e. Bass (BAS), Jazz(JAZ), Pop(POP), Classical(CLA), Rock(ROC), Country(CUR), Normal (NOR).
Or you can manually adjust the BASS and TREBLE using the respecive controls on the rear of the unit.
• Set the volume to the desired level, via the unit’s control panel or the remote. On the unit press and
hold for down or for up or simply turn the MUSIC VOL control and on the remote press
VOL’-’ for down or VOL‘+’ for up.
• Press AUTO to automaically scan the FM Staions. Press CH-/CH+ to go to previous or next FM
channel.
• Press number butons to choose the corresponding songs in USB/SD card. Press 10+, it will jump
to 11, 21, 31,...
Proudly brought to you by:
PO Box 5658 Brendale
QLD Australia 4500
Customer Support
1800 812 261
www.crest.com.au
1678/
Loading...