Toner Cable XPD-2P User Manual

;3'6HULHV3RZHU'LYLGHUV

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Specifications

Power Dividers 2-Way 4-way 8-Way

Model Number XPD-2P XPD-4P XPD-8P

INSERTION 5-40 MHz < 4.2 < 9 < 15
LOSS (In-Out) 40-470 MHZ < 4.5 < 8 < 14

(Max) dB 470-860 MHz < 4.5 < 8.5 < 14

950-1750 MHz < 6.0 < 10.5 < 15

1750-2300 MHz < 6.5 < 11 < 18

ISOLATION 5-40 MHz > 12-13 > 16-23 > 20
LOSS (Out-Out) 40-470 MHz > 20 > 20 > 20

(Min) dB 470-860 MHz > 20 > 20 > 20

950-1750 MHz > 20 > 20 > 20

1750-2300 MHz > 18 > 16 > 18

RETURN LOSS
In (min) dB 5-40 MHz > 13-16 > 12 > 9-10

40-2300 MHz > 16 > 10 > 10

RETURN LOSS
Out (min) dB 5-40 MHz > 9-18 > 12-18 > 6-10

40-2300 MHz > 14 > 8 > 8

Connectors 75 Ohm “F” Type

Power Dividers are used to provide input signals to several receivers from on
antenna/LNB combination

Frequency range 5 MHz - 2300 MHz
Connectors F Type
Impedance 75 Ohms
Power Passing All Ports Diode Isolated 30 Vdc 1A

Specifications Subject To Change Without Notice Rev 06-13 © Toner Cable Equipment, Inc.