OTX-1DVI-SD
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
DVI Video, RS-232, Stereo Audio Fiber Optic Extender
Uncompressed DVI, Audio and RS-232 Over One Optical Fiber
The OTX-1DVI-SD optical extender is a single fiber DVI extender that can send
1 channel of DVI video, 1 channel of serial data and 2 channels of analog audio
up to 10 km, without the need for distribution amplifiers, cable equalization or
in-line repeaters that are normally associated with copper cable extension.
The extender is an insert card that transports over standard multimode or
singlemode fiber using LC type optical connectors for a secure cable connection.
Graphic resolutions up to 1920x1200/60Hz and video resolutions up to
1080p/60Hz are possible over a single fiber.
Features
Extends DVI-D video resolutions
up to 1920x1200 and 1080p/60Hz
Extends analog stereo audio along with video
and serial data
Compatible with VX Pro Series of
Transmitters and Receivers
The OTX-1DVI-SD Tx and Rx are
compatible with the VX Pro Series of
modular transmitters and receivers,
providing the needed flexibility for
applications requiring both modular
insert cards and stand-alone modules.
Fits Optiva enclosures
True Plug & Play - Passes CEC, EDID & HDCP,
No EDID Learning Necessary
Diagnostic LED for power and fiber
communication status
HDCP V1.2 compliant. HDCP over DVI
Multimode operation up 305 m using OM3 fiber
Singlemode operation up to 10 km
Uses low profile LC optical connector
Transmitter powered via pin 14 of graphics
card
Applications
Command and Control Centers
Medical OR Integration / Endoscopy
Airport / Train / Information Displays
Digital Signage / Video Walls
Classrooms
True Plug & Play with HDCP
No more EDID learning or blanked out
screens! Critical EDID information is read directly from the monitor and passed
to the graphics card via the duplex data channel. The OTX-1DVI-SD can work on
any digital display and provide resolutions up to 1920x1200. The OTX-1DVI-SD
is also HDCP compliant allowing the exchange of keys between the source and
display. Copyrighted material can be sent over the fiber link.
Enclosure Options
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
OTX-1DVI-SD
DVI Video, RS-232, Stereo Audio Fiber Optic Extender
Models
DVI Unit Transmitter DVI Unit Receiver
XX
OTX-1DVI-SD/XMT-
When ordering replace “XX” with one of the Fiber Type Options
Chromatic dispersion as well as other losses should also be taken into account
Stated distances are the maximum range, shorter distance may require attenuation
Standard connection type is UPC
Multimode TX must be used with multimode RX and singlemode TX must be used with singlemode RX
-LC OTX-1DVI-SD/RCV-XX-LC
Optical Specifications
Fiber Type
“XX”
MM 850/1310/1550 6.25 Gbps <12 0.3 LC
SM 1490/1550/1310 6.25 Gbps <12 10 LC
Wavelength
(nm)
Data Rate
Optical Budget
(db)
Distance
(km)
Connection Diagram
DVI Input
Stereo Audio
Input
RS-232
LC Optical Connectors
Connector
DVI Output
Stereo Audio
Output
RS-232
General
Specifications Values
Dimensions (Insert Card) 6.3”D x 0.8”W x 4.0”H
Weight 11 oz.
Operating Temperature 0˚ to +50˚C
Storage Temperature 20˚C to +85˚C
Humidity 10 to 90% (non-condensing)
Power Consumption <2W Max.
Monitoring LED on TX & RX
Warranty 3 Years
Rapid flash - Boot up
Slow flash - Fiber disconnected
Steady on - Link established
Video
Specifications Values
Standards DVI standard resolutions up to
Resolutions (see chart on front side)
Connector Type Single Link DVI-D (18 pin male)
HDCP Compliance v1.2
EDID Plug & Play
Color Depth 24-bit
WUXGA
Audio
Specifications Values
Inputs/Outputs Unbalanced audio 2 channel (1L/1R)
Channels 24-Bit Dual Channel
Impedance 47k Ohm Unbalanced
Audio Levels 700 mVrms (maximum)
Frequency Response 20 Hz to 20 KHz (±0.1 dB)
Signal-to-Noise Ratio > 80 dB @ 1KHz
Total Harmonic Distortion < 0.1% @ 1KHz
Crosstalk >70dB @ 10KHz
Connector Type 3.5mm Stereo Headphone Jack
Data
Specifications Values
Serial Data 1 Channel RS-232
Connector Type Terminal block (3 pin)
OTX-1DVI-SD/XMT-XX-LC OTX-1DVI-SD/RCV-XX-LC
Specifications Subject To Change Without Notice Rev 06-13 ©Toner Cable Equipment, Inc.
Compliance (Pending)
Loading...