Page 1
Telephone: Nationwide: Fax: E-mail: Internet:
08/05
Digital Satellite Receiving
215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com
969 Horsham Road
Horsham, Pennsylvania 19044 USA
Digital Satellite Receiving
Commercial Digital Satellite Receiver
311
D20
HDTV H11
Page 2
TLA-20S
Line Amplifier
• 950-2150 MHz
• 20 dB Gain
• 8 dB Slope
• 13-18V DC Pass Through 500 mA
• Power 40 mA • 6 dB Noise Figure
TVA-20 DC
Variable Attenuator
• 5-2150 MHz • Power Passing 500 mA
• Zinc Die Cast Housing
• Machined F Connectors
• 0 to 20 dB Attenuation
TMX2400
TV to Satellite/DBS Multiplexer
• 5-860 MHz TV Port
• 950 -2400 MHz Satellite Port
• 2 dB Insertion Loss Maximum
• 30 dB Isolation
• 500 mA 18Vdc Pass Satellite Port
TLA2150
Sloped Amplifier
• Frequency Range 40-2150 MHz
• Slope Gain
40 - 860 MHz 5-14 dB
950 -2150 MHz 14-20 dB
• Power 110 VAC
POWER DIVIDERS
Isolated Power Passing All Ports
DBS LNBF’s California Amplifier, Norsat
Power Dividers are used to provide input signals to
several receivers from one antenna / LNB combination.
Frequency Range: 5 MHz - 2300 MHz
Connectors: “F” Type
Impedance: 75 Ω
Power Passing: All Ports Diode Isolated
30 Vdc 1A
XPD-2P
XPD-8P
XPD-4P
SFAM Attenuator Pads
30 Vdc, 1200 mA,
Power Passing
SFAM-3 3 dB
SFAM-6 6 dB
SFAM-8 8 dB
SFAM-10 10 dB
F-81 Digital
F to Female Splice
SF-81-GB1
F Type Ground Block
Page 3
TPI-2150 Power Inserter
Dual LNB
TMS16-2150 Multi-Switch
TMS8-2150
3x8 Multi-Switch
TMS4-2150 3x4 Multi-Switch
CT-D10PK
Rack mount frame for DirecTV Receivers
6 receivers in 8 rack spaces
Holds receivers with dimensions
12 1/2'' (H) x 1 7/8”W x 11 1/4”D
Slotted for ventilation
SAT-RM3
Rack mount frame for Hughes Receivers
19'' rack mount panel
3.5'' (2RU) high, .080'' steel panel
Black powder coat finish
Hardware included
Page 4
Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.
Telephone: Nationwide: Fax: E-mail: Internet:
Digital Satellite Receiving
215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com
Antennas from Winegard
Antennas Mounts & Accessories
Winegard Non-Penetrating
Roof Mounts
Model DS-5046
Base frame for non-penetrating
roof mounts, covers approximately six square feet of roof
space.
Model DS-5146
Post kit for up to 76 cm antennas. Includes pole and braces;
pole size 1.66” OD, 19” long,
16 guage steel. Base frame
not included
Model DS-5001
Post kit for 1 meter antennas,
requires two base frames (DS-
5046), covers approximately 12
square feet of roof space.
Includes pole and braces; pole
size 2.38” OD, 12 gauge steel,
30” long. Base frames are not
included.
Antenna Size Manufacturer Minimum Reflector Mount
Model Gain Material Type/Size
DS4060 60cm Winegard 35.5 Galvanealed Steel Universal
(24”)
DS2076 76cm Winegard 37.6 Galvanealed Steel Universal
(30”)
DS3100 100cm Winegard 39.8 Galvanealed Steel Universal
(40”)
Loading...