Toner Cable TDA-R-40-115 User Manual

TDA-R-115 Series

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

The TDA-R-115 series amplifiers are 15 dB gain
models ideally suited for long cable drops or multiple
subscriber outlets. With integral reverse diplex fil­ters, the TDA-R-115 is the perfect amplifier for an
addressable system. The unit is built in a rugged
zinc diecast housing with two mounting flanges and
a built in ground lug.

The amplifier is powered by a separate 12 VDC/110
or 220-240 VAC plug-in transformer. Both the
amplifier and the transformer DC power fittings are
"F" type, allowing the use of coaxial cable, which is
low in cost and readily available. A 6' RG-59 jumper
is provided for convenience.

MODEL TDA-R-40-115 TDA-R-40A-115 TDA-R-40-115-4 TDA-R-40A-115-4

Return Type Passive Active Passive Active

Configuration

Outputs 1 144

Bandwidth

Forward 54MHz-1GHz 54 MHz-1GHz 54MHz-1GHz 54MHz-1GHz

Reverse 5-42MHz 5-42 MHz 5-42MHz 5-42MHz

Gain / Loss
(includes split loss)

Forward 14.5dB ± 1dB 14.5dB ± 1dB 7.8dB ± 1dB 7.8dB ± 1dB

Reverse -1dB ± .75dB 10dB ± 1dB -8dB ± 1 dB 3.8dB ± .75 dB

Noise Figure (Forward)

Typical 3.0dB

Maximum 4.0dB

Input Return Loss 14dB

Output Return Loss 14dB (passive reverse) 10dB (active reverse)

Frequency Response ±1.0dB

CTB 52 Channels @ 20 dBmV Output -69dB typical

Maximum Output Capability +52dBmV

Cross Modulation @ 25 dBmV Ouput (with 56 channel loading) -67dBc

Maximum Input Level (Forward) +40 dBmV

Power Supply

(all models available from stock) ¬117 VAC (USA) ¬220 VAC (UK) ¬230 VAC (European)

SPECIFICATIONS

Other models also available

1 GHz Drop Amplifier with Reverse

Specifications Subject To Change Without Notice Rev 06-13 © Toner Cable Equipment, Inc.