Toner Cable TBLE-1035-xx T User Manual

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

TBLE-1035-xx

2 Way Broadband Line Extender

TBLE-35-xx 2 Way CATV 0 MHz Broadband Line Extender

with GaAs-Hybrid / Power Doubling Technology, 35 dB Gain

The Toner TBLE-35-xx Line

Extender amplifier is the latest
addition to the Toner Line of
distribution amplifiers. The

TBLE-35-xx features high

performance GaAs-Hybrid for
improved performance and
better distortion characteristics.
The amplifier is built in a die
cast Aluminum outdoor housing
that has integral neoprene
rubber weather gasket and a
stainless steel mesh RFI
gasket. The housing features
an automatic switching mode
power supply for line powering
in the 30 to 90 VAC range.
The amplifier features a 20 dB
gain reverse amplifier for use in 2 way systems and can be ordered with one of 3 stan­dard sub splits, 42/54 MHz, 55/70 MHz and 65/80 MHz. The diplex filters are the plug
in type for easy field changes or repairs.

The amplifier is designed for flat operational gain at 35 dB with a reverse operational
gain of 20 dB while providing superior performance. The forward bandwidth has an
input equalizer along with plug in interstage equalization and plug in pads for level con­trol. The reverse has post stage plug-in equalizer, a fixed plug in pad and 20 dB gain
control. The plug in pads and EQ’s are industry standard and compatible with Olson &
Arris distribution amplifier accessories.

Ordering information

TBLE-35-xx, replace the xx with reverse option

42= 5-42 MHz reverse, 54-1000 MHz forward
55= 5-55 MHz reverse, 70-1000 MHz forward
65= 5-65 MHz reverse, 85-1000 MHz forward

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

TBLE-1035-xx

Performance @ Recommended Levels

(Temperature Range -40° to +60° C)

79 channels (NTSC) flat output 47/47dBmV 40dBmV
Composite Triple Beat (CTB) -72 dBc -82dBc
Composite Second Order (CSO) -68 dBc -64 dBc
Cross Modulation (X -MOD) -61dBc -70 dBc
Noise Figure 6dB 7dB+

79 channels (NTSC) 10 dB interstage slope 37/47 dBmV 40 dBmV
Composite Triple Beat (CTB) -78 dBc -82dBc
Composite Second Order (CSO) -74 dBc -64 dBc
Cross Modulation (X -MOD) -65dBc -70 dBc
Noise Figure 6dB 7dB+
Fwd Group Delay 48.25-51.83 MHz 30ns

55.25-58.83 MHz 30ns

61.25-64.83 MHz 15ns
Other 4ns
85-86 MHz 10ns

Reverse Group delay 5-6 MHz 50ns

13-14 MHz 4ns
29-30 MHz 20ns
41-42 MHz 30ns
64-65 MHz 20ns

Power, Environmental

RFI 5-1000 MHz -100 dB
Hum Modulation 10A / 15A -70 / -65 dB
Surge IEEE C62,41-1991 Cat. B3 combination Wave 6KV, 3KA
AC Input 30-90 VAC
Current 10 typ. 15 max Amps
Power 13.0 Watts 1.5 Watts
Temperature -40° to +60° C
Weight 3.6 LBS / 1.6 KGS

2 Way Broadband Line Extender

General

Forward Reverse

Bandwidth (42) 54-1000 MHz

Options (55) 70-1000 MHz 5-55 MHz

(65) 85-1000 MHz 5-65 MHz

Gain 35 dB 20 dB
Flatness ±0.75 dB ±0.5 dB
Return Loss In /Out -16 dB -16 dB
Test Port
Gain Control Plug in Pads 0-20 dB
Slope control Plug in EQ -

s -20 dB -20 dB

5-42 MHz

Specifications Subject To Change Without Notice Rev 06-13 ©Toner Cable Equipment, Inc.