Toner Cable SMP260T User Manual

SMP260 Transcoder

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

SMP260 can transcode H.264 (also known as MPEG-4 AVC or Part 10) to MPEG-2 or MPEG-2 to H.264 with mini­mum loss in video quality. In addition, SMP260 can transrate (compress) the digital programs either in MPEG-2 or
MPEG-4 format for satellite/IP transmission. Based on the distribution needs, the service providers can choose 4-pro­gram, 8-program or 12-progam transcoding with the same equipment. It also supports audio transcoding/pass through
and subtitle add on/pass through. SMP260 provides the service provider a cost-effective yet scalable solution to
repurpose their content from different sources and format and achieve digital content distribution seamlessly.

Features

• Up to 12 SD programs transcoding to MPEG-2 or H.264 format (6 HD programs in H.264 output)

• Digital to digital decode and re-encode with minimum loss in video quality

• Support multi-bitrate transcoding for one program

• PAL to NTSC (576i to 480i) mutual conversion

• Support downscaling and upscaling

• Support audio transcoding and level adjustment

• Support audio and subtitle pass through and synchronization

• Support stream processing including PID remapping and EPG data insertion

• ASI and TSIP Input and Output

Specifications Subject To Change Without Notice Rev 02-13 ©Toner Cable Equipment, Inc.

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

SMP260 Transcoder

DVB-S/S2 Input

Video Transcoding MPEG-2 MP@ML; MPEG-2 MP@HL
(CBR & VBR) MPEG-4 AVC at MP@L3;

MPEG-4 AVC at HP@L4
Aspect Ratio 4: 3 or 16: 9
SD Resolution PAL (720x576) and NTSC(720x480);
HD Resolution 1080i(1920x1080); 720p(1280x720);
Conversion aspect ratio; resolution, format,

adding subtitle
Audio Audio passthrough/transcoding
VBI/Subtitle PID passthrough
Video Input Bit-rate MPEG-2 SD: 2 Mbps ~ 15Mbps

MPEG-2 HD: 1 0Mbps ~ 20 Mbps

H.264 SD: 1 Mbps ~ 15 Mbps

H.264 HD: 6 Mbps~20 Mbps

Re-multiplexing

PID Re-mapping and Filtering

MPTS Output Synchronization
Routing Any Input to Any Output

IP & ASI Interface
IP

Interface 1 x 1000 Mbps per port
IP Encapsulation MPEG TS over UDP/RTP
MPEG TS MPTS and SPTS
I/O Processing Up to 12 Streams,

max at 72 Mbps per Streams
Addressing Unicast and Multicast
Management IGMPv2, IGMPv3
Forward Error Correction ProMPEG

ASI

Interface 4 BNC connectors (2 ASI inputs and

2 ASI outputs), 75Ω
MPEG Format 188/204 Bytes
I/O Processing 1 MPTS/SPTS per port,

up to 120 Mbps per port

Management

Interface 100Base-TX, RJ45
NMS Wellav Digital Service Manager

Support SNMP

Physical & Environment

Input Voltage 90 – 260 VAC
Power Consumption Approx 100 W
Rack Space 1 RU
Dimension (WxHxD) 19 x 1.75 x 17.3”

480 x 44 x 440mm
Operating Temperature 0 to 50°C
Storage Temperature -40 to 65°C
Relative Operating Humidity <95%

Order Information

SENTC2 H.264/MPEG-2 to MPEG-2 Transcoder

(12 programs)

SENTC4 MPEG2/H.264 to H.264 AVC Transcoder

(12 programs)

Model Information

Model Number SMP260-SENTC2 SMP260-SENTC4
Inputs

MPEG-2 SD √ √
MPEG-2 HD √(6 programs) √(6 programs)
H.264-SD √ √
H.264 - HD √(6 programs) √(6 programs)

Outputs
MPEG-2 SD √ X
MPEG-2 HD X X
H.264-SD X √
H.264 - HD X √(6 programs)