Toner Cable SMP180 User Manual

SMP180

Multi-Channel Receiver

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

With a flexible modular design, SMP180 can receive and process digital programs from up to 12 DVB-S2 transpon­ders or 12 QAM-RF frequencies. With a different set up, SMP180 can support program decryption via four multi-chan­nel CAM modules with commonly adopted CAS in the market. With ASI and IP interfaces for input and output,
SMP180 can be integrated into any headend systems for content delivery and re-distribution.

Features

• Variety of inputs including DVB-S2, QAM-RF, ASI and IP

• Independent ASI and IP output for different applications.

• Up to four integrated DVB common interfaces to descramble four full transport streams

• Support program remultiplexing and PSI/SI table regeneration

• EPG/Private Data Insertion

Specifications Subject To Change Without Notice Rev 02-13 ©Toner Cable Equipment, Inc.

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

SMP180

Multi-Channel Receiver

DVB-S/S2 Input

4XRF input per module (three modules in 1 RU)
Constellation QPSK, 8 PSK

Symbol Rate

DVB-S 1~45 Msps

(QPSK: 1/2,2/3,3/4,5/6,7/8)

DVB-S2 1~31.5 Msps

(QPSK: 1/2,3/5,2/3,3/4,5/6,8/9,9/10;

8PSK: 3/5,2/3,3/4,5/6,8/9,9/10 )
Input Frequency 950~2150 MHz
Signal Level ~-65~-25 dBm
Acquisition Range +/- 5 MHz
Tuner Step Size 100 KHz
Return Loss >10 dB
LNB Power
Vertical 11.5V~14.0V,
Horizontal 16.0V~19.0V, 22kHz/off
22K Switch on/off

QAM RF Input (optional)

Input Frequency Range 48 -862 MHz
RF Channel 4 (6/7/8 MHz) per module
QAM Modulation Mode 16/32/64/128/256 QAM
QAM Type ITU-T J.83 Annex A/ C, Annex B

(Future feature)
Symbol Rate 1.0~6.9 MBauds
RF input bit-rate up to 55 Mbps

DVB De-scrambling

DVB-CI Interfaces up to 4 independent CI slots

(EN50221)
CA Method Multicrypt/Simulcrypt, Hot Plug
CAS Irdeto, Conax, Viacess, Nagravision,

Novel SuperTV, Verimatrix, CTI,

Dvcrypt&other DVB-simulcrypt CAS

GBE IP Interface

Interface 1 x 1000 Mbps per port
IP Encapsulation MPEG TS over UDP/RTP
MPEG TS MPTS and SPTS
I/O Processing Up to 12 Sockets,

max at 72 Mbps per socket
Addressing Unicast and Multicast
Management IGMPv1, IGMPv2, IGMPv3
Forward Error Correction ProMPEG

DVB ASI Interface

Interface 4 BNC connectors

(2 ASI inputs and 2ASI outputs), 75Ω
MPEG Format 188/204Bytes per TS
I/O Processing 1 MPTS/SPTS per port, up to

120 Mbps per port

Re-multiplexing

PID Re-mapping and Filtering
MPTS Output Synchronization
Routing Any Input to Any Output
Redundancy Input Service Redundancy & IP Port

Redundancy

Management

Interface 100BaseTX, RJ45
NMS Wellav Digital Service Manager
Web-based Management (future feature)
Support SNMP

Physical & Environment

Input Voltage 90 – 260 VAC
Power Consumption Approx 60 W
Rack Space 1 RU
Dimension (WxHxD) 19 x 1.75 x 17.3”

480 x 44 x 440mm
Operating Temperature 0 to 50°C
Storage Temperature -40 to 65°C
Relative Operating Humidity <95%

Order Information

SRS2 DVB-S2 Receiver (12 channel)
SRSCI DVB-S2 Receiver (4 channel w/ 4 CI)
SRC DVB-C Receiver (12 channel)
SRCCI DVB-C Receiver (4 channel w/ 4 CI)