Toner Cable HDE-CSV-QAM User Manual

HDE-CSV-QAM

MPEG-2 HD Encoder
1x Component / HD-SDI / HDMI / VGA / Composite ► 1x QAM

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

HDE-CSV-QAM (MPEG-2 HD Encoder – 1xComponent/HD-SDI/HDMI/VGA/Composite – 1xQAM) accepts one (1)
high-definition (HD) program from any of the following inputs: 1xComponent, 1xHD-SDI, 1xHDMI (unencrypted),
1xVGA, and 1xComposite. MPEG-2 encoded outputs are available in the following formats simultaneously: 1xQAM,
1xASI, and 1xIP (10/100Base-T Ethernet). The QAM RF output is frequency agile over the entire CATV frequency
range of 54-1002 MHz (channels 2-158) with an output level of +40 dBmV.

The encoder supports Dolby® Digital audio encoding, and Closed Captioning (EIA-608 and EIA-708). Comprehensive
remote monitoring and control is accomplished using any standard Web browser via a front-panel 10/100Base-T
Ethernet connection. A rear-panel VGA output port is available for loop-through applications.

Features

• Accepts one (1) program from any of the following inputs: 1xComponent, 1xHD-SDI, 1xHDMI (unencrypted),
1xVGA, and 1xComposite

• Simultaneously delivers the following outputs: 1xQAM, 1xASI, and 1xIP

• Provides +40 dBmV QAM RF output level

• Provides comprehensive GUI-based monitoring and control via standard Web browsers

• Compact design permits installation of up to 3 Encoder modules in 1RU

• Supports Real-time Dolby® Digital audio encoding

• Supports user-defined PSIP configuration

• Supports Closed Captioning EIA-608 and EIA-708

Ordering Information

Model Stock # Description

HDE-CSV-QAM 6382 MPEG-2 HD Encoder; 1xComponent/HD-SDI/HDMI/VGA/Composite inputs;

1xQAM+1xASI+1xIP outputs

HDE-3MCH 6389 1RU Rack mount chassis; holds 3 HDE-CSV-QAM modules

1xComponent / HD-SDI / HDMI / VGA / Composite

1xASI

1xQAM

1xIP

(1 Program)

(1 Program)

MPEG-2 HD ENCODING

DOLBY®DIGITAL AUDIO ENCODING

Specifications Subject To Change Without Notice Rev 07-12 ©Toner Cable Equipment, Inc.

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

HDE-CSV-QAM

MPEG-2 HD Encoder

1x Component / HD-SDI / HDMI / VGA / Composite ► 1x QAM

Specifications

Dimensions (W x D x H): 5.65 x 12.5 x 1.75 inches (144 x 317.5 x 44.5 mm)
Power: External Power Supply (Input 115-230VAC /

Output 12VDC @ 3 Amp)

Power Dissipation: 20 W
Weight (one module): 1.5 lbs (0.7 kg)
Operating Temperature: 32 to 122 °F (0 to 50 °C)
Storage Temperature: -13 to 158 °F (-25 to 70 °C)
Operating Humidity: 0 to 95% RH @ 35 °C max, non-condensing
Storage Humidity: 0 to 95% RH @ 35 °C max, non-condensing

INPUT OUTPUT

GENERAL

Encoding Profile
Video

Output Format: MPEG-2 HD MP@ML; ISO 13818-2

Chroma: 4:2:0

Resolution: 720x480; 1280x720; 1920x1080
Frame rate: 29.97 fps (480i); 29.97 fps (1080i); 59.97 fps (720p)

Aspect Ratio: 4:3 & 16:9

GOP Structure: I & P frames (user-selectable)

Transport Rate: Variable (user-selectable)

Video Bit Rate: Variable (user-selectable)

Video Pre-filter: Variable (user-selectable)

Intra DC Precision: Variable; 8-11 bit (user-selectable)

Color Space: YCbCr and RGB

Audio

Output Format: Dolby® Digital AC-3

Sampling rate: 48 kHz

Bit rate: Variable; 96 - 448 Kbps (user-selectable)

Closed Captioning

Component: EIA- 608; 1x RCA (CC)

HD-SDI: EIA-708; Embedded in HD-SDI input

HDMI: EIA- 608; 1x RCA (CC)

Composite: EIA- 608

QAM

Connector: 1x “F” Female (Rear-panel)

Modulation: QAM 16, 32, 64, 128, and 256

Standards: ITU-T J.83; Annex A and B
DVB Symbol Rate: Variable; up to 7 MSymbol/sec (MBaud)
Frequency Range: 54 to 1002 MHz

Tuning: CATV Channel Selectable (Ch. 2 to 158)

Channels’ Bandwidth: 6 MHz

RF Level: +40 dBmV ±1 dB
RF Level Adjustment: +32 to +42 dBmV, 1 dB increment
Frequency Tolerance: ± 0.5 kHz @ 77 °F (25 °C)

Frequency Stability: ± 5 kHz over 32 to 122 °F (0 to 50 °C)
Amplitude Flatness: ± 0.25 dB (over 6 MHz channel)

Phase Noise: -98 dBc (@ 10 kHz)

Spurious: -60 dBc

Broadband Noise: -70 dBc (@ +35 dBmV output level,

5.5 MHz bandwidth)

Impedance: 75 Ω

Spectral Inversion: Auto Recognition

Carrier Suppression: 45 dB

Return Loss: 14 dB typical

Signal-to-Noise Ratio (SNR): 40 dB typical

MER: 40 dB typical

I/Q Phase Error: Less than 1 degree

I/Q Amplitude Imbalance: Less than 1%

ASI

Connectors: 1x BNC (Front-panel)

Format: DVB-ASI

Standard: ETSI EN 50083-9

IP

Connector: 1x RJ45 (Front-panel)

Standard: 10/100Base-T Ethernet
UDP/RTP: Supported (user-selectable)

Component

Connectors: 3x RCA for Video (Y, Pb, Pr)

2x RCA for Analog Audio (L, R)
1x RCA for Digital Audio (PCM)

Video Resolution: 480i, 720p, & 1080i

Video Aspect Ratio: 4:3 & 16:9

HD-SDI

Connector: 1x BNC

Standard: SMPTE 292M

Video Resolution: 480i, 720p, & 1080i

Audio: Embedded PCM and pass-through

Dolby® Digital only

HDMI

Connector: 1x HDMI

Video Resolution: 480i, 720p, & 1080i

HDCP Encryption: Not supported

Audio: Embedded PCM & pass-through

Dolby® Digital only

VGA

Connectors: 2x Female VGA (Input + Loop-through Output)

Video Resolution: 640x480 @ 60 fps

800x600 @ 60 fps
1024x768 @ 60 fps

Audio: 2x RCA for Analog Audio (L, R)

1x RCA for Digital Audio (PCM)

Composite

Connectors: 1x RCA for Video (Y)

Video Resolution: 480i

Audio: 2x RCA for Analog Audio (L, R)

1x RCA for Digital Audio (PCM)

Local Monitoring: 1x Status LED

1x Power LED

Local Control: 1x IP Reset button

Remote Monitoring/Control: GUI-based menu via Web browser

(1x RJ45 front-panel connector; 10/100Base-T,
also used for IP output)

ALARMS / MONITORING / CONTROL