Toner Cable Gray328 User Manual

Gray|328 Digital Audio Mixer
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
This ultra compact, 8 bus, 32 input capable mixer delivers many features like EQ and dynamics with a simple user interface. The Gray|328 is specifically designed for edit system control in linear edit suites. The Gray|328 talks ESAM II protocol via RS422 to any edit controller.
Master Control and Mobile Trucks are also ideal applica­tions for the Gray|328. Surround Sound monitoring is a breeze with the 8 channel monitor section. The Gray|328 provides a built in preview switcher, and video-centric operation is enhanced by separate rows of push buttons indicating Program or Preset assignment of audio to stereo faders.
Flexibility of handling multiple professional audio formats is an important consideration. The Gray|328 will accept either analog, AES, or SD/HD SDI. The base system also includes 8 channels of both AES and analog output. Eight optional channels of output are available in either analog or AES format.
Small Footprint – takes up less valuable edit suite
space than any other digital audio for video mixer
Operates like a video switcher – minimizes train-
ing time with a familiar User Interface
Program/Preset Architecture – Quickly add &
remove sources from each bus
Shallow menu tree – most functionality is
accessed in three levels or less
8x8 Monitor Matrix – Fully configurable with built-
in Surround Modes & user definable setups
Master Fader – Quickly control the level of all
eight Program bus outputs
Keep your audio in the Digital Domain – just as
you do with the video
Handle multiple professional audio input for-
mats – Analog with or without mic, AES with or
without SRC, SD and HD SDI
3 Band Parametric EQ – Adjustable, with Notch
Filters
Dynamics – Sixteen channels of compressor, lim-
iter and expander
Headphone Jack – Front mounted 1/4” jack with
separate output matrix and level control
48kHz or 96kHz Sample Rates
Flexible Routing – Any Input to Any Output
Output Configuration – Outputs can be config-
ured for Program, Monitor, or Meter
Auto TO/FROM – Access all 32 Inputs with Edit
System Control
Pan Knob on Each Stereo Fader – with easy to
find center detent
Master Monitor Volume Knob – with easy to read
LED Unity indicator
Unity Indicator on Each Fader – Instantly KNOW
your audio level is at Unity for Clean Feed dubs
9 Long-throw 100 mm Faders for Smooth Fades
200 Memory Registers – Quickly Save/Recall
Panel Snapshots for specific sophisticated settings
Cut & Auto Trans – Dedicated buttons for manual
or automatic transition control
Compact Flash – For simple software updates in
the field
Specifications Subject To Change Without Notice Rev 10-12 ©Toner Cable Equipment, Inc.
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
Gray|328 Digital Audio Mixer
Specifications
GENERAL
AUDIO INPUTS: 4 input slots, 32 channels max
Digital: AES3id, SDI
Analog: Balanced Line Level
Mic Level
AUDIO OUTPUTS:
AES: 4 AES3id
Analog: 8 Balanced Analog, 1 Stereo Headphone
Optional: 1 Optional output slot (8 channels),
can be configured as Analog or Digital, switchable between Program, Meter, or
Monitor outputs EQUALIZER: 3-band Parametric w/notches DYNAMICS: Compressor/Limiter/Expander AUDIO DELAY: 16 Video Frames per input maximum @
48kHz TONE GENERATOR: Internal, 1kHz PHASE REVERSAL: 180˚ switchable on left input of pair SAMPLE RATE: 48kHz/96kHz TRANSITION RATE: 0 – 999 Frames TRANSITION Field accurate, 3000 steps per second @ RESOLUTION: 48kHz, 6000 steps per second @ 96kHz TIMING INPUT:
Video Sync: NTSC(29.97fps), PAL(25fps), HDTV
(60Hz, 59.94Hz, 48Hz, 48/1.001Hz, 25fps,
24fps, 24/1.001Hz)
Audio Sync: AES3id
SETUP REGISTERS: 200 User Programmable, transferable
via Ethernet METERS:
Standard: Internal, Proprietary
Optional: Customer-supplied w/Optional Output
Module
External Meter I/F (not yet available)
POWER
Voltage Requirements: 100-240VAC Frequency: 50-60 Hz Power Consumption: 60 Watts Operating Temperature: 10-40˚ Centigrade
CONNECTIONS
INPUTS:
Analog Line Level: 15-pin D-Sub Breakout
Analog Microphone: XLR
AES Digital: BNC
SDI Digital: BNC
Sync: BNC
OUTPUTS:
Analog: 25-pin D-Sub Breakout
AES Digital: BNC
Headphone: Stereo Phone Jack (TRS), 1/4"
Meter: RJ-11
INTERFACE:
GPI: 9-pin D-Sub (Transition Start) RS-422 (ESAM II): 9-pin D-Sub Ethernet (TCP/IP): RJ-45
PERFORMANCE
ACCURACY: 64-bit Floating Point Internal
24-bit I/O
DIGITAL AES OUTPUTS:
Number: 4 AES pairs (8 channels)
Format: AES3id (24 bit)
Impedance: 75Ω unbalanced
Sample Rate: 48kHz/96kHz
ANALOG OUTPUTS:
Number: 8 Line Level
Dynamic Range: > 102 dB (>105 dB Optional Out)
Coupling: DC Active - Balanced
Source Impedance: < 30Ω
Frequency Range: 20 - 20kHz (± .1dB)
Level: +22dBu into 600Ω
DIGITAL AES INPUTS:
(OPTIONAL):
Number: 4 AES pairs (8 channels)
Format: AES3id (24 bit)
Impedance: 75Ω unbalanced
Sample Rate: 48 kHz/96kHz (32kHz - 192kHz with
optional sample rate converter)
ANALOG INPUTS
(OPTIONAL):
Number: 4 Line Level
2 Microphone (optional)
Dynamic Range: >100dB
Impedance: >10kΩ bridging or terminating
Frequency Range: 20 - 20kHz (± .1dB) Nominal Gain Range: -22dBu -+10dBu MICROPPHONE INPUTS
(OPTIONAL):
Number: 2
Dynamic Range: >100dB
Impedance: >10kΩ bridging or terminating
Frequency Range: 20 - 20kHz (± .1dB) Microphone Gain Range: -62dBu - -15dBu
Phantom Power: 48V, switchable
DIGITAL SDI INPUT
(OPTIONAL):
Number: 1 SDI input, 8 channels audio selectable
from audio groups 1 - 4
Format: SD or HD, auto-detection
Impedance: 75Ω unbalanced
Mixer Sample Rate: (SRC bypass) 48kHz Only (SDI Locked)
(SRC enabled) 48kHz/96kHz (SDI Locked or Unlocked)
PHYSICAL DIMENSIONS
Width: 11.1" (28.19cm) Height(Front): 1.4" (3.56cm) Depth: 11.4" (28.96cm) Height(Rear): 7.14" (18.14cm) Weight: (fully optioned, including power supply): 11 pounds (5kg)
Loading...