Toner Cable FSM-60S User Manual

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

FSM-60S Fusion Splicer

The FSM-60S fusion splicer sets the standard for core alignment
fusion splicing by incorporating a user-friendly interface with
enhanced features to provide the most rugged and reliable
fusion splicer in the market today. The new rugged construction
adds improved reliability by resisting shock, dust, and rain, and
can withstand a 30” drop test.

The FSM-60S splices a fiber in 9 seconds and heats a 60mm
splice sleeve in 30 seconds, for a total cycle time of only 39 sec­onds. New features, such as automatic tube heater operation,
user-selectable clamping method (sheath clamp or fiber holder
system), automated monitor image orientation, and battery
charge capability during splicer operation provide the end user a
productivity tool they can count on.

New software included provides the ability to download splice
data to a PC for splice data reporting, download splicer operating
software via the internet to maintain peak performance, and
download video images from the splicer to enhance technical
support.

Detachhable Work Table

Ordering Information

DESCRIPTION AFL NO.
FSM-60S Fusion Splicer (machine only) S014531

Includes: ADC-13 AC Adapter, ACC-14 AC Cord, Spare Electrodes (pair), Sheath Clamp,
USB Cable, Splicer Carrying Strap, Quick Reference Guide, Video Instruction manual,
JP-05 Splice Sleeve Cooling Tray, and Transit Case with Carrying Strap

FSM-60S Fusion Splicer Kit (with cleaver) S014532

Includes: CT30A Cleaver, ADC-13 AC Adapter, ACC-14 AC Cord, Spare Electrodes (pair),
Sheath Clamp, USB Cable, Splicer Carrying Strap, Quick Reference Guide, Video
Instruction manual, JP-05 Splice Sleeve Cooling Tray, and Transit Case with Carrying Strap

FSM-60S Fusion Splicer Kit (with cleaver, battery and cord) S014562

Includes: BTR-08 Battery, DCC-14 Battery Charge Cord, CT30A Cleaver, ADC-13 AC
Adapter, ACC-14 AC Cord, Spare Electrodes (pair), Sheath Clamp, USB Cable, Splicer
Carrying Strap, Quick Reference Guide, Video Instruction manual, JP-05 Splice Sleeve
Cooling Tray, and Transit Case with Carrying Strap

Features

• Rugged construction providing shock, dust and moisture resistance

• Dual monitor position with automatic image orientation

• Automatic arc calibration and fiber identification

• User-selectable fiber clamping method – sheath clamp or fiber holders

• Auto-start tube heater feature

• Color LCD display with anti-reflective coating for excellent visibility in
bright sunlight

• Simultaneous battery charge and splicer operation

• Long life battery (up to 160 splice/heat cycles per charge)

• Detachable work table incorporated into the transit case

• Data and video download software and splicer upgrade software
included; software upgrades through PC application via the internet

• Green friendly – RoHS & WEEE compliant

DESCRIPTION AFL NO.
Miscellaneous

ELCT2-20A Electrodes S013532
ASW-02 Splicing Workstation S010532
JP-05 Splice Sleeve Cooling Tray S014537
CLAMP-S60A Sheath Clamp S014550
(8mm min cleave for 250μm, 16mm min cleave for 900μm)
CLAMP-S60B Sheath Clamp S014551
(8mm min cleave for 250μm and 900μm)
CLAMP-S60C Sheath Clamp S014552
(16mm cleave for 900μm loose tube fiber)
CC-24-60S Transit Case (fits only FSM-60S) S014559

Specifications Subject To Change Without Notice Rev 09-11 ©Toner Cable Equipment, Inc.

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

FSM-60S Fusion Splicer

Accessories Recommended for the FSM-60S

DESCRIPTION AFL NO.
Cleavers

CT-30A Cleaver S014080

Fiber Holders (pairs)

FH-60-250 Fiber Holder S014548
FH-60-900 Fiber Holder S014549

Batteries and Power Cords

ADC-13 AC Adapter S014535
BTR-08 Battery (160 splice/heat cycles) S014540
DCC-14 Battery Charge Cord (BTR-08) S014541
DCC-12 Power Cord S013552
(connects ADC-13 to cigarette lighter socket)
DCC-13 Power Cord S013556
(connects ADC-13 to power source via alligator clips)

Specifications
Parameter Value

Model FSM-60S Fusion Splicer

Applicable Fibers Single-mode (ITU-T G.652), multimode (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
Cladding Diameter 80μm to150μm
Coating Diameter 100μm to 1,000μm
Fiber Cleave Length 8 to 16mm with 250μm coating diameter, 16mm with 900μm coating diameter
Typical Average Splice Loss 0.02dB with Sm, 0.01dB with mm, 0.04dB with DS, 0.04dB with NZDS

measured by cut-back method relevant to ITU-T and IEC standards
Splicing Time Typical 9 seconds with standard single-mode fiber
Arc Calibration method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc

calibration function available
Splicing modes 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera core alignment data
Storage of Splice Result Last 2000 results to be stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated

image orientation
Magnification 300X for single X or Y view, or 187X for X and Y view
Viewing method Dual cameras with 4.1 inch TFT color LCD monitor
Operating Condition 0 to 5,000m above sea level, 0 to 95%RH and -10 to 50°C respectively
Mechanical Proof Test 1.96 to 2.25N
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3 (40), 35-55 seconds with Fujikura

micro sleeves
Protection Sleeve Length 60mm, 40mm, micro
Splice/Heat Cycles with Battery Typical 160 cycles with power save functions activated
Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with

BTR-08 battery
Terminals USB 1.1 (USB-B type) for PC communication. mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protection Maximum wind velocity of 15m/s. (34 mph)
Dimensions 136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches)
Weight 2.3 kg (5.1 lbs) with AC adapter ADC-11; 2.7kg (5.9 lbs) with BTR-08 battery