Toner Cable FC Series User Manual

Fiber Optic Connectivity

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

We stock a vast selection of singlemode and multimode patchcords
and pigtails in varying lengths with a selection of a number of industry
standard connectors. Each patchcord or pigtail is supplied with a
detailed data sheet with its test and performance results.

Connectors available are:

SC/UPC, ST/UPC, SC/APC, LC/UPC, FC/UPC, LC/APC,
FC/APC, E2000/APC

Features:

– T900 um Buffer tube for secure and reliable connectorization
– Yellow - singlemode, Orange - Multimode
– Aramid yarn reinforcement for strength and protection
– Tested and designed in accordance to Bellcore GR-409-CORE
– Meets TIA/EIA 586A
– Individually packaged

Singlemode and Multimode, Simplex and Duplex Patchcords & Pigtails

XX XM XX X XXX XXX

FP = Fiber Pigtail
FJ = Fiber Patchcord

__M = Length in Meters

D = Duplex
S = Simplex

SM = Singlemode
MM = Multimode

XXX = First Connector

(see chart below)

XXX = Second Connector

(see chart below)

Connectors available are (prefix-connector type):

SC = SC/UPC SCA = SC/APC ST = ST/UPC FC = FC/UPC
FCA = FC/APC LC = LC/UPC LCA = LC/APC E2000A = E2000/APC

Example: FJ/12M/SM/S/SCA/LCA

is a Fiber Patchcord / 12 Meters / Singlemode / Simplex SC/APC connector / LC/APC connector

Patchcord & Pigtail Part Number Matrix

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Optical Attenuators

Optical attenuators are used normally at optical receivers to adjust
for the optimum optical input power level to ensure proper operat­ing parameters of the receiver. Both fixed (connectorized) attenu­ator and variable (step) attenuators are available.

Step attenuators like the OTOA-1000 operate on the principle of
putting a “microbend” in the optical cable allowing some light to
escape the cladding, resulting in some light loss or attenuation.
The OTOT-1000 has a combination of 1, 2, and 4 dB loops that
when combined, can provide from 1 to 7 dB of attenuation in stan­dard 3 mm singlemode optical cable at 1310 nm. Other cable or
wavelengths may result in different attenuation characteristics.

FA MF XXX XX

FA = Fiber Attenuator

Connector Type
FC = FC/UPC
FCA = FC/APC
SC = SC/UPC
SCA = SC/APC
ST = ST/UPC
LC = LC/APC

MF = Male/Female

Value 1 to 10 dB in
1 dB steps, plus 15
and 20 dB

Fixed Attenuators

FC/UPC Male to Female

SC/APC Male to Female

FC/APC Male to Female

LC/UPC Male to Female

ST/UPC Male to Female

SC/UPC Male to Female

OTOA-1000
Step Attenuator

Fixed Attenuator Part Number Matrix