Toner Cable EQM-2xx User Manual

EQM-2xx IP EDGE QAM Modulator
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
EQM 2xx is QAM modulator with up to 24 RF - QAM channels to add DVB-C services into distribution networks at CATV-Headends or near the edge of the subscribers.
MPEG transport streams (TS) must be supplied over IP-networks as unicast or multicast data packets encapsulated in UDP format. The payload of the UDP packets should be compliant to the DVB MPEG-2 transport stream packets.
Conversions of the MPEG transport stream like PCR restamping and "insertion of limited zero-packets" are supported. The modulator can be configured and operated via a web browser on a local PC or laptop and can be integrated into a network management system (NMS).
Up to 24 QAM
output channel
Web/SNMP server
Redundant power
supply
Horizontal cooling
system ‘stackable’
Features Block Diagram
GbE input RJ 45 connector
QAM Modulation
DVB-C Standard EN 300429 ITU-T J.83 Annex B (optional) 32-256 QAM 8 Transport streams for each GbE-Input results in max. PCR-Correction, flexible datarate
Direct Digital Synthesis (DDS)
Frequency Range 47...1000 MHz Up to 24 output channels; Monitoring output (-20dB)
Web/SNMP server
RF Monitoring output (-20 dB)
Redundant power supply
Horizontal cooling system ‘stackable’
IP
IP
IP
IP
GbE 8 x QAM
(1)
GbE
(2)
GbE
*) EQM 208= 8 channels EQM 216=16 channels EQM 224=24 channels
8 x QAM
8 x QAM
WEB-Control
(*)
(*)
WEB/
SNMP
Mains
Power Supply
EQM 2xx Edge QAM Modulator
Combiner
RF Testport
Mains
Power Supply
RF
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
Specifications
EQM-2xx IP EDGE QAM Modulator
IP-Interface
EQM 224 3 x GigEthernet 1000Base-T EQM 216 2 x GigEthernet 1000Base-T EQM 208 1 x GigEthernet 1000Base-T Connector RJ45 Signalling Status-LED for IP-Connection Transport Streams 8 Transport streams for each IP-Interface Protocol UDP
QAM-Modulation DVB-C Standard EN 300429
ITU-T J.83 Annex B (optional) 32, 64, 128, 256 QAM
Roll-Off 12%, 13%, 15%, 18% Symbol Rate 4,48...7,0 Channel Width 6, 7, 8 MHz Modulation Error Rate (MER) > 47 dB Shoulder Attenuation > 56 dB
NIT-Exchanging PCR-Correction
RF Direct Digital Synthesis (DDS) Connector Return Loss 14 dB Frequency Range 47...1000 MHz Frequency Step Size 12,5 kHz Frequency Deviation 5 ppm Phase Noise typ. -105 dBc Max. Output Level -12 dBm (97 dBμV)
F 75 Ω
Rear View
RF
Max. Output Attenuation 20 dB Output Level Step Size 0,5 dB Level Accuracy ±1 dB Spectrum Flatness ±0,2 dB Spurious 60 dB Output Channels 24 QAM channel EQM 224 16 QAM channel EQM 216 8 QAM channel EQM 208
Monitoring/Configuration Integrated Web server SNMP agent for NMS systems Monitoring Output F-connector 75 Ω
-20 dB ±0,5 dB Return Loss 14 dB
General Data
Power consumption < 35 W Main voltage Redundant Power Supply
100...240 V EMC EN 50083-2 Safety EN 60950-1 Environmental ETSI EN 300019-1-3 Class 3.1 Housing 19" x 1RU Dimensions 19" W x 13" D x 1,75" H
AC
Ordering Codes
Type: EQM 208 EQM 216 EQM 224 Ordering code: D147.01 D148.01 D149.01 Ordering code Annex B: D147.02 D148.02 D149.02 Number of GbE inputs: 1 2 3 Number of QAM output channels: 8 16 24
Specifications Subject To Change Without Notice Rev 04-13 © Toner Cable Equipment, Inc.
Loading...