Toner Cable EQAM-430A User Manual

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
EQAM-430A (EdgeQAM with Pro:Idiom™) is designed to allow operators, integrators, and resellers of DIRECTV®services to aggregate multiple HDTV programs for delivery over a standard coaxial distribution network in commercial facilities such as hotels, hospitals, assisted living residences, and universities. Comprehensive GUI-based remote monitoring and control capabilities, including SNMP-based manage­ment, allow service providers to remotely manage, operate, and trouble-shoot DIRECTV
’s COM23-600
receivers deployed in various locations from a centralized NOC (Network Operation Center).
EQAM-430A accepts HD content from up to sixteen (16) COM23-600 satellite receivers and delivers up to eight (8) outputs in QAM format, protected with Pro:Idiom™ encryption. The EQAM-430A can be config­ured with one or two output modules, each capable of delivering four (4) adjacent QAM RF channels. Each QAM channel can contain up to two HD programs encoded in MPEG-4 or MPEG-2 for a total of 16 HD programs delivered over eight (8) QAM RF channels.
Features
• Configurable with 1 or 2 output modules, each with four adjacent QAM channels, for a total of 8 QAM channels
• Comprehensive GUI-based menu for remote monitoring and control via Web browser
• Provides a front-panel RF test point (at 20 dB below primary QAM output)
• User-selectable QAM 16, 32, 64, 128, and 256 modulation modes
• Provides comprehensive management of receivers
• Provides SNMP v2 for product and network management
• Provides Null Packet deletion and addition
• Accepts variable and constant bitrate streams
Ordering Information
Model Stock # Description
EQAM-430A-1-8 6523A-1-8 EdgeQAM-430A equipped with 1 Quad-QAM output module & 2:1 software
(8 HD programs)
EQAM-430A-2-16 6523A-2-16 EdgeQAM-430A equipped with 2 Quad-QAM output module & 2:1 software
(16 HD programs)
SSRM-20 2762 Serial Switch Rack Mounted; Facilitates command/control management between
EdgeQAM-430A and up to 20 COM23-600 units
EQAM-430A
EdgeQAM with PRO:IDIOM
TM
16x DirecTV
Com23-600 8x QAM (PRO:IDIOMTM)
®
Specifications Subject To Change Without Notice Rev 03-11 ©Toner Cable Equipment, Inc.
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
Specifications
Connectors
Video Stream: 1 x RJ-45; 1000BaseT Ethernet (GbE)
Control: 1 x RJ-45;10/100BaseT Ethernet
Stream Portfolio
SPTS & MPTS: Null Packet Deletion & Addition
PMuxing of input streams
Bitrate: Variable and Constant
No. of Output Modules: 2
Connector: 1 x “F” Female (for combined outputs)
Output Module Portfolio
Modulation: QAM 16, 32, 64, 128, and 256
Standards: ITU-T J.83; Annex A and B DVB Symbol Rate: Variable; up to 7 MSymbol/sec (MBaud) Frequency Range: 54 to 996 MHz
Tuning: CATV Channel Selectable (Ch. 2 to 157)
Channels’ Bandwidth: 24 MHz (4x Adjacent 6 MHz)
RF Level: +35 dBmV ±1 dB (95 dBμV ± 1 dB)
RF Level Adjustment Range: +30 to +37 dBmV, 1 dB increment
Frequency Tolerance: ±0.5 kHz @ 77°F (25°C)
Frequency Stability: ± 5 kHz over 32 to 122°F (0 to 50°C) Amplitude Flatness: ±0.25 dB (over 6 MHz channel)
Phase Noise: -98 dBc (@ 10 kHz)
Spurious: -60 dBc
Broadband Noise: -70 dBc
(@ +35 dBmV output level, 5.5 MHz bandwidth)
Impedance: 75 Ω
Spectral Inversion: Auto Recognition
Carrier Suppression: 45 dB
Return Loss: 14 dB typical
Signal-to-Noise Ratio (SNR): 40 dB typical
MER: 39 dB typical
I/Q Phase Error: Less than 1 degree
I/Q Amplitude Imbalance: Less than 1%
Indicators: 1 x LED (Green): Power
2 x LED (Green): Output Module Present
Local Monitoring/Control: Front-panel IP Reset Switch
See Remote Monitoring/Control
Remote Monitoring/Control GUI-based menu via Web browser Interface: Field-Upgradable firmware via FTP command
SNMP v2: Error Log to Remote Server
Ambient Temperature Settopbox Status QAM Lock
INPUT (From up to 16x DirecTV®COM 23-600 OUTPUT
ALARMS / MONITORING / CONTROL
Dimensions (WxDxH): 19.0 x 18.125 x 1.75 inches (483 x 460 x 44 mm) Power: 117 VAC/60 Hz (Fuse: 3.0 amp, 250 VDC, Slo Blo) Power Dissipation: 38 W Weight: 12 lbs (5.9 kg) Operating Temperature: 32 to 122 °F (0 to 50 °C) Storage Temperature: -13 to 158 °F (-25 to 70 °C) Operating Humidity: 0 to 95% RH @ 35 °C max, non-condensing Storage Humidity: 0 to 95% RH @ 35 °C max, non-condensing Certifications: UL/CSA 60950
CENELEC EN 55022 & 55024
GENERAL
EQAM-430A
EdgeQAM with PRO:IDIOM
TM
16x Directv
®
Com23-600 8x QAM (PRO:IDIOMTM)
Loading...