©Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.
Telephone: Nationwide: Fax: E-mail: Internet:
PBN EPON-ONU & 4100 Light Link
®
Direct
215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com
Optical Interface
EPON Standard: IEEE802.3ah
Operating wavelength
CATV: 1550 nm ± 5 nm
Data RX: 1490 nm ± 10 nm
Data TX: 1310 nm ± 20 nm
CATV input
Range: -8 ~ 0 dBm @ 1550 nm
Nominal -5 dBm @ 1550 nm
Data RX sensitivity: < -24 dBm @ 1490 nm
Data RX saturation: >-3 dBm @ 1490 nm
Data TX output: -1 ~ 4 dBm @ 1310 nm
Line speed
Downstream: 1.25 Gbps
Upstream: 1.25 Gbps
Optical connector: SC/APC, E2000/APC
Fast Ethernet Subscriber Ports
Interface: Auto-negotiation,
10/100 Mbps, full/half duplex
IEEE802.1D: 64 MAC addresses per
Ethernet port
IEEE802-1Q: VLAN mapping to LLID
IEEE802.1P: 7 priority queues with
L2/L3/L4 classification
Frame size: 64...1522 bytes
Data security: Supports 128-bit AES
Logical Link IDs: 3 x LLID
Connectors: 2 x RJ-45
(1)
VoIP Subscriber Port (Option)
VoIP: SIPv2
Voice codecs: G.711, G.726, G.729, 723.1
Features: Call conferencing, Call forwarding,
Caller ID, Call waiting, DTMF,
Echo cancellation, Fax-tone detection
pass-through, Silence suppression, VAD
VoIP connectors: 2 x RJ-11 (POTS)
CATV Subscriber Port (Option)
RF output:
(2)
18 dBmV
RF frequency: 45 ~ 862 MHz
RF flatness: ± 1 dB
RF connector: SCTE F-type
CATV Link Performance
(2)
42 CENELEC channels (as per EN50083-3)
CNR: > 48 dB
CSO: >55 dBc
CTB: >61 dBc
110 NTSC channels (as per FCC standard)
CNR: >49 dB
CSO: >55 dBc
CTB: >61 dBc
General
Power input
Mains: 16 Vac, 1.5 A
External battery: 11 ~ 15 Vdc
Power consumption
CATV receiver: 2.7 W
Fast Ethernet node: 3.4 W
Voice adapter: 4.0 W
External battery: Sealed lead-acid 13.8 V,
7 Ah (8 hr uptime
(3)
)
Operating temperature: -10 ~ 60°C
Storage temperature: -20 ~ 70°C
Dimensions (HxWxD)
Indoor unit: 170 x 256 x 47 mm
Outdoor unit: 220 x 263 x 83 mm
Ship size (HxWxD)
Indoor unit: 245 x 350 x 80 mm
Outdoor unit: 220 x 263 x 110 mm
Weight
Indoor unit: 0.8 kg
Outdoor unit: 1.6 kg (excluding battery)
Ship weight
Indoor unit: 1.2 kg
Outdoor unit: 2.0 kg (excluding battery)
EPON-ONU Light Link®Direct Specifications
Optical Interface
EPON Standard: IEEE802.3ah
Operating wavelength
CATV: 1550 nm ± 5 nm
Data RX: 1490 ± 10 nm
Data TX: 1310 ± 20 nm
CATV input (option)
Range: -8 dBm to 0 dBm @ 1550 nm
Nominal: -5 dBm @ 1550 nm
Data RX sensitivity: < -24 dBm @ 1490 nm
Data RX saturation: > -3 dBm @ 1490 nm
Data TX output: -1 dBm to 4 dBm @ 1310 nm
Line speed
Downstream: 1.25 Gbps
Upstream: 1.25 Gbps
Optical connector:
4100, 4100V SC/PC - blue – flat polished
4100T, 4100VT SC/APC - green – angle polished
Fast Ethernet Ports
Interface: Auto-negotiation, 10/100Mbps,
full/half duplex
IEEE802.1D: 64 MAC addresses per Ethernet port
IEEE802.1Q: VLAN mapping to ports
Frame size: 64 to1522 bytes
Data security: Supports 128-bit AES
Connectors: 4 x RJ-45
CATV Port (Option)
RF output: 18 dBmV (1)
RF frequency: 45~870 MHz
RF flatness: ± 1 dB
RF connector: SCTE F-type
CATV Link Performance (1)
42 CENELEC channels (as per EN50083-3)
CNR: > 48 dB
CSO: > 55 dBc
CTB: > 61 dBc
79 NTSC CW channels + Digital
CNR: > 49 dB
CSO: > 55 dBc
CTB: > 61 dBc
Phone FXS Ports (Option)
VoIP: SIPv2
Voice algorithms: G.711, G.726, G.729A,
G.723.1, Dynamic pay load
Features: Call transfer, Call conferencing, Call
fowarding, Caller ID, Call waiting, Do
not disturb, DTMF, Echo cancellation,
Fax-tone detection pass-through,
Silence suppression, VAD
Phone Connectors: 2 x RJ-11 (POTS-FXS)
General
Power input 12 Vdc 1.25A plug-pack included
for the regions as listed
Mains: 100~240Vac - 50/60Hz - 0.6 A
Power consumption:
CATV receiver: 2.7 W
Fast Ethernet node: 3.4 W
Operating temperature: -10 °C to 40 °C
Storage temperature: -20 °C to 70 °C
Dimensions: (HxWxD) 140 x 220 x 30 mm
Ship size: (HxWxD) 215 x 273 x 99 mm
Weight 0.5 kg
Ship weight
4100, 4100V 0.8 kg
4100T, 4100VT 1 kg
Light Link®Direct 4100 Specifications