Toner Cable EN-91P User Manual

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

(13

&RPSUHVVLRQ3ODWIRUP(QFRGHU

The EN-91P is an ultra-low delay 1080P MPEG 4 AVC/H.264
high definition encoder. To fully leverage the ultra-low
delay mode, Adtec’s RD-60 or RD-70 (1080P) IRD must be
paired with the EN-91P to deliver picture-to-picture
services in 33 milliseconds or 1 frame. The EN-91P’s
standard and low delay modes are fully interoperable with
third party IRDs making it ideal for cross brand
installations; often times, the EN-91P can deliver lower latencies with third party IRDs when compared to use with their matched
brand encoder. MPEG 4 AVC is significantly more efficient compared to JPEG making it the CODEC of choice for multiplexed and
bandwidth sensitive applications; AVCs interoperability significantly adds to the value of solutions based on this industry standard
CODEC.

The lightweight EN-91P platform offers amazing reliability, features and specifications all in a 1 RU chassis. Starting with its
redundantly powered chassis through its enhanced control and monitoring via a browser, SNMP or its front-panel through its award
winning video support including SD, 2D-HD and 3D and 4K synchronous AVC encoding plus our industry first sixteen channel phase­aligned audio, robust VBI support, reliability and ease of use for an extraordinary value. In addition to encoding phase aligned audio,
the EN-91P pass-through support includes PCM, Dolby E (16 and 20 Bit) and Dolby Digital (2.0 and 5.1).

The EN-91P encodes and concurrently transports services via ASI, IP and DVBS/S2. The DVBS/S2 modulator is available in IF or L-band
with modulation modes ranging from QPSK up to 32APSK with 5% roll-off based on software licenses.

olloff

r

2022 FEC)

atures

nd latency

ͻMultiple Concurrent IP streams w/ FEC

ͻSimultaneous ASI, IP, and DVBS/S2 transport
ͻSNMP
ͻRobust, quiet, lightweight design

App

l

ications

ͻDSNG (ultra-low, low and normal delay)
ͻTier One Contribution
ͻ

3D, 4K (Ultra HD) synchronous Contribution

ͻ

High Efficiency Trunking (JPEG replacement)

ͻ

1080P Distribution

Adaptive IP Contribution via the Internet

ͻ

Key Fe

ͻ

1080P 50 and 1080P 59.94 fps encoding (3G)

ͻAVC 4:2:2 Video encoding
ͻ3G Copper and Fiber SFP Video Interfaces, 3G-SDI
ͻ1, 2, or 3 Frame 1080P, 1080i, 720P or D1 End-to-e
ͻAutomatic SD, HD or 3G (Level A or Level B) detection
ͻSixteen (16) channels of phase aligned audio encoding
ͻTime Code, Captions, Teletext and other VBI support
ͻRedundant Power Supplies
ͻFront Panel, Web UI, SNMP control and monitoring
ͻDVBS/S2 modulation with IF or L-Band QPSK to 32 APSK with

5%

ASI and IP Transport (IP supports TCP, UDP, RTP, RTMP and

ͻ

SMPTE

Specifications Subject To Change Without Notice Rev 11-13 ©Toner Cable Equipment, Inc.