Toner Cable DTA 3050 User Manual

DTA3050

Digital Turn Around Router

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Digital television service operators wishing to aggregate
and process MPEG, ATSC, Digicypher, or DVB based
services for traditional (satellite, cable, terrestrial) ser­vices will find the DTA ideal. It boasts 10 ASI inputs.
Each supporting wire speed, a three-way mirrored ASI
output, GIGE, and optional SMPTE-310. Redundancy
for ASI and SMPTE- 10 is supported with an intelligent
built in relay-bypassed switch. The DTA-3050 is IPTV
and BBTV ready today, it supports multicast and unicast
configurations including SPTS/UDP, MPTS/UDP, MPEG
and DVB tables. Encryption support includes DVB-CSA
with Ethernet Simylcrypt, AES for use with Simylcrypt
compatible Conditional Access management Servers
(CAS) vendors. The DTA 3050 is ideal for traditional
and next generation television networks.

Benefits

• Conditional Access: The DTA-3050 provides DVB­CSA and BISS encryption and AES conditional
access encrypt capabilities. DVB-CSA encryption is
available as fixed key BISS or Simulcrypt based
interfaces compatible with most major DVB-CSA
CAS vendors. AES encryption includes support for
Adtec's OST for Transport and Verimatrix VCAS for
residential set top and computer-based decryption.

• Aggregation of ASI, or IP based SPTS or MPTS
services: The DTA-3050 provides ten ASI input

ports enabling it to aggregate locally encoded SPTS
or re-muxed MPTS from encoders, receivers, video
servers or other devices providing MPEG 2 Transport
via ASI and IP, or SMPTE310 and IP.

• IPTV: Gigabit Ethernet distribution of digital televi­sion services includes MPTS, SPTS over UDP for
Set Top, or computer decoding and MPTS over UDP
for bundled distribution (Digital Simulcast).

• ASI: Three port mirrored ASI output interface pro­vides integration with traditional distribution methods
including Cable, Satellite, and Terrestrial.

• SMPTE-310: An optional 2 port mirrored SMPTE­310 output interface provides integration with ATSC
distribution.

• Flexible Con guration & Control: Controlling and
con guring the DTA-3050 is easy. Whether using the
integrated front panel keypad and LCD, Terminal or
remote Web page interface.

• DTV Electronic Program Guide: Create and
upload your own program listings for distribution over
ATSC, DVB, and IPTV applications using our web­hosted DTVGuide electronic program guide genera­tor service. A very economical way to instantly begin
sending EIT data, DTVGuide requires no additional
equipment when paired with the DTA and its built-in
EIT injection carousel. The DTA fetches EIT data
which has been uploaded to DTVGuide over the
internet, and immediately begins to inject the data
into the transport stream.

Specifications Subject To Change Without Notice Rev 02-12 ©Toner Cable Equipment, Inc.

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Front Panel

Tactile Raised Keypad Buttons:

Mode, Select, Enter, Escape, Up,
Down,Left, Right

Blue Translucent LCD:

20 character by 2 row

Front Panel Host LEDs:

Power, Alarm, Link, Busy, MPE

Front Panel LEDs :

In: 1 - 10 ASI

Out: Alarm, ASI, SMPTE 310, CA, GigE

ASI Inputs

ASI x 10 (BNC)
188 or 204 Byte mode
SPTS or MPTS
210 Mbps per input
256 PIDs per input
Fill scrubbing on input
Input Modes:

Auto (Remap all services)
Manual (Add/Drop/Remap PID/Services)
Pass (Pass all services as-is)
MHP Injector SI Injector

Redundancy

1+1 Input N + 1, N + 2 Input
ASI x 2 (BNC inputs for auto switch)
No external controller required

Outputs

Gigabit Ethernet

- SPTS over UDP

- MPTS over UDP

Very low jitter
ASI (model is DTA 3050-ASI)
Mirrored (BNC x 3) Byte or Burst Mode

54 Mbs Byte

210 Mbs Burst Jitter less than 150 (nS)
SMPTE-310 (model is DTA 3050-SMPTE-310)
Mirrored (BNC x 2) Byte Mode only

19.39 Mbs fixed

SMPTE-310 option includes ASI

Table Processing

MPEG Tables:

PAT CAT (if CA is enabled) PMT
DVB Tables:

(Add/Drop/Remap DVB Services)

NIT SDT TDT/TOT EIT
ATSC Tables :

(Add/Drop/Remap ATSC Services)

VCT (Cable or Terrestrial) MGT STT

RRT EIT (1-4)
DCII Tables:

(Add/Drop/Remap Digicypher

services DVB/ATSC)

Conditional Access Encryption

DVB-Common Scrambling Algorithm (CSA)
DVB Simulcrypt TS 103 197 v 1.2.1
FIPS 140-2 hardware based random number
generator (RNG)
Approved 3rd Party CA Vendors include:

CSA: Irdeto, Conax, EuroCAS, KeyFly,

Xcrypt

AES: Verimatrix

Host Platform

PowerPC
Adtec optimized Linux Kernel
10/100 Ethernet RJ-45 (Eth 0)
10/100/1000 Ethernet RJ-45 (Eth 1)
Serial Port (RJ-48)
USB 2.0 (2)
IEEE 1394 (Firewire)
N.C. / N.O. Tally Interface
XML Configuration
HTTP, FTP, Telnet, IP Logging, XCP
(Adtec encrypted layer 3 protocol)

Power

70-240 VAC switching power supply
50/60 Hertz
Rated at 94 Watts return nominal usage 20
watts

Physical

19 in. wide, 1.75 in. tall, 16 in. deep,
(483 x 44.5 x 406 mm)
1 Rack Unit
Weight 13lbs.

Environmental

Active cooling (Push pull Fans)
Operating: 0 to +50 degrees C
Storage: -30 to +65 degrees C
Less than 70% RH
Non-Condensing

Specifications

DTA3050

Digital Turn Around Router

Power: 70 – 240 VAC switching power supply; standard 3-pin computer power plug.
GigE: Gigabit Ethernet used for IP Egress
COM2 - Reserved: Reserved for redundancy switching
COM1 - Terminal: Back end serial port for Adtec service technicians
Fast Ethernet: 10/100 base T ethernet used for connecting to control interface
USB 2.0: Reserved for future use.
ASI Inputs (10): Asynchronous Serial Inputs for receiving programming
ASI Redundancy Input: Used to link 2 DTA-3050 units in tandem; one as primary, one as backup.
SMPTE Redundancy Input: Used to link 2 DTA-3050 units in tandem; one as primary, one as backup.

(Optional)

Redundancy Tally: Used to hook up to an external alarm device
ASI Outputs (3): Triple Mirrored ASI Outputs
SMPTE 310 Outputs (2): Optional Mirrored SMPTE Output