Toner Cable DSP806 User Manual

Features

• ATSC (HDTV), QAM, and NTSC
compatibility for CATV and
terrestrial broadcast applications
provides maximum compatibility
for all signal processing

• High 45dBmV output for optimum
carrier-to-noise performance

• Microprocessor control enables digital push-button input
and output channel selection for ease of installation,
configuration, and servicing

• In-band carrier-to-noise ratio >65dB ensures superior picture quality.

• SAW filtered for superior adjacent channel performance enables drop-in channel
expansion

• Non-volatile memory for input and output channel recall in the event of power failure

• Front panel controls and test point enable easy setup and monitoring

• Double heterodyne conversion provides over 60dB spurious output and channel rejection for interference­free adjacent channel operation

• Broadcast-quality specifications for unparalleled data translation

• IF loop provides compatibility with CMTS, QAM modulators and IF scramblers

• IRC and HRC input and output offset available for frequency settings in systems using offset channels

• Auxiliary AC outlet for convenience

Specifications Subject To Change Without Notice Rev 05-12 ©Toner Cable Equipment, Inc.

DSP806

HDTV Agile Channel Processor

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Input Bandwidth 54~806MHz
Input RF Level (analog) 10dBmV
Input AGC Range (analog) 0~25dBmV
Output Bandwidth 54~806MHz
RF Output (analog max) 55dBmV
RF Output (digital max) 40dBmV
Carrier to Noise (in-band) >60dB
Carrier to Noise (out of band) >68dB
Spurious Output >65dB
Output Frequency Stability ±5kHz
RF Input Connection 75 Ω F-Female
RF Output Connection 75 Ω F-Female

Voltage Input 110~120VAC
Power Output Receptacle Yes
Dimensions 19˝ (L) x 9˝ (D) x 1.75˝ (H)
Weight 7.9 lbs

Ordering Information
DSP806 HDTV Agile Channel Processor

Specifications

Front View Rear View