DSE24
High Definition Digital Signage Encoder
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
Somewhat unnoticed by the average consumer, during the past 5 years digital flat panel television displays
have been placed where we work, shop, vacation, educate ourselves and even where we sleep. Millions of
“High Definition” capable displays have been deployed in these locations with most receiving content via a
traditional coaxial cable television type distribution network. The intent of facility owners in their investment of
flat panel televisions such as in the hospitality industry is to create a home environment for their customer.
Savvy entrepreneurs recognize that an opportunity exists to offset the cost of digital flat panel displays by
allowing advertisers to have access to them for targeted messaging directly to the consumer while they
engage in activities away from home. Drake introduces a high quality and affordable solution that uses legacy
coaxial cable networks to connect digital signage content providers with millions of existing HD flat panel displays where consumers are most likely to view them.
Drake’s DSE24 will encode a single uncompressed program derived from devices with HDMI, Component
Video or VGA outputs to HD MPEG2 video. An internal QAM modulator and low noise upconvertor allows
existing legacy fiber/coax networks to be used as distribution channels for digital signage content. This provides instant access to an extensive network of digital displays capable of viewing valuable advertiser based
or informational video in a vibrant “High Definition” format.
Applications
• Digital Signage
• Commercial B2B
• Health Care
• Government/Military
• Cable TV Networks
Benefits
• Supports 480i, 480p, 720p and 1080i resolutions
• MPEG1, Layer 2 audio (MP2)
• A frequency agile output to1000MHz and
+45dBmV output level insure simple trouble free
integration onto existing networks
The DSE24 comes in a convenient desk top package.
Also Available in
Rack Mount Chassis!
Specifications Subject To Change Without Notice Rev 02-11 ©Toner Cable Equipment, Inc.
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
Video Inputs: VGA (with pass-through to monitor)
HDMI (unencrypted)
Component (Y-Cr-Cb)
Composite via Y input for 480i
Input Resolutions: 480i, 480p, 720p, 1080i video
Audio Inputs: L-R baseband audio, dual RCA
S/PDIF optical audio, 32kHz-192kHz sample rate PCM
HDMI embedded audio, 32kHz-192kHz sample rate PCM
Video Encoding: MPEG2
Resolutions of 720x480, 1280x720, 1920x1080 - determined by input.
Color Sampling: 4:2:2, 4:2:0
Aspect Ratio: Determined by input.
GOP: size typically 15 frames incl. I, P, and B frames.
Audio Encoding: MPEG1, Layer 2 (MP2)
QAM Output: 64QAM or 256QAM, ITU Annex B
5 - 1000MHz frequency coverage
STD, HRC, IRC, and Broadcast channel plans
+45dBmV output power
15dB output level adjustment range
Phase noise = -95dBc @ 10KHz offset
Broadband noise = -75dBc @ > +/-12MHz offset
MER = >40dB equalized
Channel frequency response = < 1dB
Carrier suppression > 40dB
I/Q inbalance < 1degree
Output level accuracy = +/-1dB
Format: Table-top chassis, with optional 2-unit mounting in 1RU 19" rack
Control: Front-panel buttons and LCD for local control
On-board ethernet connection for remote control
Power: +5V @ 1.7A
**Preliminary Specifications, Subject to Change**
Specifications
DSE24
High Definition Digital Signage Encoder
Loading...