Toner Cable DPI1200 User Manual

DPI1200

Digital Program Insertion Ad Server

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Digital Program Insertion Ad Server Designed to
concurrently insert up to twelve MPEG2 or AVC
programs into a digital cable or television service,
the DPI-1200 Ad Server offers the absolute highest
transport standards required for broadcasting. The
DPI-1200 imports programs to its core, processes
and multiplexes them in preparation for their deliv­ery via ASI output to a single or multiple ad splicers
and seamlessly interfaces with Adtec's adVantage
Enterprise Management Solution. The DPI-1200
interoperates with ad insertion systems from C­COR and SeaChange as well.

Combine the ad server with Adtec's mediaHUB-HD Pro or mediaHUB-HD 422 Studio Encoder to bridge the transition
from analog and SDI digital insertion to digital program insertion.

Benefits

• Twelve Concurrent Inserts:

The DPI-1200 delivers ads to seamless back-to-back
splicing on twelve unique programs. Its ability to
stitch together the media and maintain broadcast
transport standards is unmatched by the competition.

• Gigabit Ethernet Input:

The DPI-1200 utilizes a GIGE Ethernet interface to
provide rapid media loading.

• RAID storage:

The DPI-1200 includes 300 GB of RAID storage.

• DVB-ASI Outputs:

The DPI-1200 provides three mirrored DVB-ASI out­puts. This is ideal for interfacing with up to three Ad
Splicers concurrently without external ASI distribution
hardware.

• SMPTE-310M (Optional):

The DPI-1200 optionally provides the highly accurate
clock and physical interface for ATSC 8VBS modula­tors. When SMPTE-310 is enabled, the ASI outputs
mirror the SMPTE clock rate.

• Absolute Control:

Controlling and configuring the DPI-1200 is user­friendly. Whether using the integrated front panel
keypad and LCD or Telnet, the DPI-1200 responds
rapidly and reliably to the desires of the operator.

• Traffic and Billing Interface:

The DPI-1200 provides a native Traffic and Billing
interface. When combined with the Adtec Traffic and
Billing Gateway Server, the DPI-1200 will automati­cally retrieve media and schedules and return logs to
their appropriate folders on the LAN/WAN.

Specifications Subject To Change Without Notice Rev 10-11 ©Toner Cable Equipment, Inc.

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Front Panel

Tactile Raised Keypad Buttons:

Mode, Select, Enter, Escape, Up, Down,Left, Right

Blue Translucent LCD:

20 character by 2 row

Front Panel Host LEDs:

Power, Alarm, Link, Busy, MPE

Front Panel LEDs:

ASI, SMPTE 310M, Channels 1-12, Alarm

Standards Compliance

SCTE 30

Ad Server to Splicer IP based command and

control protocol
SCTE 35
Via SCTE 30 from Splicer Transport private data cueing

Storage

300GB RAID 1

Inputs

Gigabit Ethernet
DTMF/GPI
Twelve GPI or GPO
Twelve DTMF In

Output Options

ASI Mirrored (BNC x 3) - 213 Mbps Max
Jitter less than 150 (nS)
PCR, PTS re-stamping
SMPTE 310M Option (BNCx2) - 19.4 Mbps

Host Platform

PowerPC CPU
Linux 2.6 Kernel OS
10/100 Ethernet RJ-45
Serial Port (RJ-48)
GPIO (9 Pin D-sub)
HTTP, FTP, Telnet, IP Logging, DHCP, XCP
(Adtec encrypted layer 3 protocol)

Power

70-240 VAC switching power supply
50/60 Hertz
Rated at 150 Watts nominal usage 40 watts

Physical

19 in. wide, 1.75 in. tall, 14 in. deep
1 Rack Unit

Environmental

Active cooling (Push pull Fans)
0 to 90 Degrees Fahrenheit
Less than 70% RH
Non-Condensing

Specifications

DPI1200

Digital Program Insertion Ad Server

Power: 70 – 240 VAC switching power supply; standard 3-pin computer power plug
GigE: Gigabit Ethernet
Firewire: IIEE1194 FireWire (reserved for future use)
Terminal Interface: Back end serial port for Adtec service technicians
Fast Ethernet: 10/100 base T ethernet interface
RS232: Used to communicate with redundancy switch
USB 2.0: Reserved for future use.
I/O DTMF or GPIO: Inputs 1-12 DTMF tone / GPIO board option for DPI-1200
ASI Redundancy Input: Used to link 2 DPI-1200’s in tandem; one as primary, one as backup
SMPTE Redundancy Input: Used to link 2 DPI-1200’s in tandem; one as primary, one as backup
No-C-NC: Redundancy Tally, used to hook up to an external alarm device
ASI Outputs (3): Triple Mirrored ASI Outputs
SMPTE 310 Outputs (2): Optional Mirrored SMPTE Output