DNP100
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
Features
• Enhanced bit rate for 1080i output
• Linux-based Operating System
• Network controlled API
• Webkit QT web browser for multi-layering
overlays
• RS-232 output for commercial controlled
environments
• API for native applications
• Synchronous triple output video
• LCD system status display
Products for Use
with DNP1000
Network Media Player
The Drake DNP100 is a multi-output network media player
capable of playing multi-layered MPEG-2 or MPEG-4 streams
including an optional webkit/web browser-generated overlay.
Once loaded with user-selected content, the DNP100 will output
video stream resolutions of 480p, 720p, or 1080i through multiple
synchronized outputs including Component, HDMI, Composite,
and VGA output ports. These output ports then deliver the
enhanced bit rate SD or HD content to the Drake DSE24 HD
Digital Signage Encoder, the SDE24 or HDE24 MPEG Encoder
Solution for QAM Modulation.
Specifications Subject To Change Without Notice Rev 02-13 ©Toner Cable Equipment, Inc.
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
Specifications
Video Output
Component: 480p, 720p, 1080i
HDMI: 480p, 720p, 1080i
Composite: 480i
Output: VGA & HDMI
Audio Output
L/R Stereo: R/L RCA
Digital Optical Toslink
Control I/O
Optional push-button dual controls
Custom program can allow up to 8 inputs
RS-232 Commercial Monitor Control
IR Extender (on front panel)
Network Connection
LAN: 10/100/1000 Base-T
WiFi: 802.11 b/g (optional)
Video Format Support
MPEG2: MP@HL (35 Mbps max HD)
MPEG4: Part 2 (20 Mbps max HD)
Composite: 480i
WM9/VC-1: 20 Mbps max
Graphics Format
JPEG: On media layer, (recommended resolution is 1920x1080)
Browser Support: HTML,BMP, TIFF, GIF, Javascript
Bandwidth
Broadband: DSL,Cable,T1 with at least 128 Kbps
TCP/IP Address
LAN: Any fixed IP address for each player
WAN: Fixed public IP address for each player or router with its port
Required Ports for SNMP API
Player port is fixed at 161
Source port 161, Player IP, Destination Port 161
Network Protocol Support
Internet: IP, TCP, UDP, ICMP, ARP,DHCP, HTTP, FTP, IGMP RTP, SNMP
Power
Input Voltage: 100-240 VAC
Power Dissipation: 7 Watts
Environment
Operating Temperatue: 0 to 40° C
Operating Humidity: 80% max, relative humidity, non-condensing
DNP100
Network Media Player
Part 10 H.264 (15 Mbps max HD)
forwarding enabled if players are behind a router.
Loading...