Toner Cable DIP-2xx IP User Manual

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

',3[[,3 ⇔$6,*DWHZD\

DIP 206 / DIP 212 is an IP  ASI Gateway for use in IP-networks.

 DIP 206

1 x 6 ASI-Ports

The device is converting UDP/RTP-encapsulated MPEG packet in DVB-compliant
transport streams.

DIP 2xx is applicable for bidirectional usage. The ASI ports of DIP 2xx can therefore
independently enabled as either in- or output. DIP 2xx can also be used for ASI ->
IP encapsulation.

An implemented web server allows the configuration with a standard web browser
locally or over an LAN/WAN network. Monitoring over a Network Management
System (NMS) is supported by an implemented SNMP agent.

DIP 2xx is suited as an interface between the traditional ASI- and the new IP-based
DVB-World in Headends.

Features

 IP-In-/Output

- 1 x IP-GbE (DIP 206)

- 2 x IP-GbE (DIP 212)

- RJ 45 Connector

 ASI-In-/Outputs

- ASI-Ports programmable as Input or Output

 Configuration/Control

- 10/100 Mbit Ethernet Interface WEB-server

- SNMP-Agent for NMS

 Test Outputs

- ASI-Testports switchable for each GbE-Input

 Reliability

- Redundant power supply

Block Diagram

IP

GbE

Processing Unit GbE ASI Converter

ASI 1 - 6

ASI Test ASI Test

GbE

 DIP 212

2 x 6 ASI-Ports

SNMP-Agent for



NMS

Redundant power



supply

IP

WEB-Control

WEB/

SNMP

(DIP 212 only)

ASIASI

ASI 7 - 12

WEB/

SNMP

Mains

Power
Supply

ASI Gateway

Mains

Power
Supply

DIP 2xx

 Horizontal cooling system ‘stackable’

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Specifications

IP-Input/Output DIP 206:
1 x GigEthernet 1000Base-T
DIP 212:
2 x GigEthernet 1000Base-T
RJ45-Connector
Status-LED for IP-Connection

ASI-Input/Output DIP 206: 1 x 6 ASI-Ports
DIP 212: 2 x 6 ASI-Ports
(according to EN 50083-9)

- Impedance: Connector 75 

- Return loss: > 18 dB
Each ASI-Ports is adjustable
as Input or Output
Status-LEDs for each ASI-Port
License key for each Port

Configuration DIP 206: 1 x 10/100 Mbit Ethernet
DIP 212: 2 x 10/100 Mbit Ethernet
RJ45-Connector
Web server, SNMP agent

',3[[,3 ⇔$6,*DWHZD\

Rear View

Block Diagram

MPEG MPEG MPEG MPEG

over IP over ASI over IP over ASI

Monitoring DIP 206:
1 x ASI-test output for each GbE-Port
DIP 212:
2 x ASI-test outputs for each GbE-Port
Logbook

General Data

Power consumption < 35 W
Mains Voltage 100 to 240 V
Redundant Power Supply

AC AC

Cooling system Stackable devices
EMC EN 50083-2
Safety EN 60950-1
Environmental ETSI EN 300019-1-3 Class 3.1
Weight DIP 206: 2.6 kg
DIP 212: 5.2 kg

GbE

Processing Unit Processing Unit

GbE  ASI Converter GbE  ASI Converter

Config.-

Port

Web Server Web Server

SNMP-Agent SNMP-Agent

Configuration Monitoring Configuration Monitoring

ASI ASI
1-6 1-6

ASI

Testport

GbE

Config.-

Port

ASI

Testport

Power Power

Supply Supply

Redundant

Ordering Code

Type: DIP 206 DIP 212
Ordering code: D154.01 D155.01
Number of GbE in-/ outputs: 1 2
Number of ASI in-/ outputs: 6 12
Number of ASI Testports: 1 2
Number of WEB/SNMP ports,
10/100 MBit : 1 2

Specifications Subject To Change Without Notice Rev 04-13 © Toner Cable Equipment, Inc.