Toner Cable D9854 User Manual

The Cisco®D9854 Advanced Program Receiver is designed for satellite content distribution applications requiring DVB-S and
DVB-S2 reception capabilities with advanced digital outputs for digital tier program distribution. A built-in decoder is capable
of decoding an MPEG-2 or MPEG-4 AVC High Definition (HD) program from analog monitoring, or Standard Definition (SD)
down-conversion for composite. Decoding of an MPEG-2 or MPEG-4 AVC SD program is also available for analog and SDI
output. A high-quality SDI or HD-SDI output version of the D9854 is available for re-encode applications.

Digital Program Distribution

The ASI transport output or the optional MPEGoIP output provides a number of output modes, including the capability of car­rying decrypted program for digital tier distribution. This helps ensure that compressed video programs are efficiently distrib­uted to households equipped with digital set-top boxes.

Digital Program Mapping

Digital Program Mapping allows programmers to transparently substitute programs at the uplink. It maintains predictable and
compliant transport output during service replacement, Network Information Table (NIT) retune, and channel changes, includ­ing force tunes. This feature remaps the packet identifier (PID) information from the primary service to an alternate service,
allowing downstream devices to continue to operate without headend operator intervention. This helps ensure availability of
alternate programming in the digital tier.

Digital Ad Insertion

Digital Program Insertion (DPI) information is available along with the video and audio PIDs for external ad insertion in com­pressed digital format.

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

KEY FEATURES

• Four L-band inputs

• DVB-S QPSK demodulation

• DVB-S2 QPSK/8PSK demodulation

• PowerVu®conditional access with DES or DVB
descrambling

• Supports Basic Interoperable Scrambling System
(BISS) conditional access

• DVB-CI support for CAM-based conditional access

• 4:2:0 HD MPEG-4 AVC and MPEG-2 1080i and 720p
decoding

• 4:2:0 SD MPEG-4 AVC and MPEG-2 decoding

• Aspect ratio conversion (4:3, 16:9, 14:9) with Active
Format Descriptor (AFD) control for SD programs

• AFD support for down-conversion of HD programs with
aspect ratio conversion

• Closed Captioning support for EIA-608 and EIA-708

• MPEG and Dolby

®

Digital audio decoding

• DVB or Imitext subtitling

• Four audio outputs providing either two stereo pairs or
four mono channels of balanced audio, each with the
ability to use part of their output for applications such
as SAP, cue tones, etc.

• Utility data up to 38.4 kbps via RS-232

• Uplink addressable decoder output control (VBI, audio
routing, DPI, and ASI output)

• Fingerprint trigger

• Field upgradeable software and security

• SNMP for setup, control, and monitoring

• Front panel LCD for control and monitoring

• Web browser interface for easy setup, control, and
monitoring

• DVB-VBI and SCTE-127 support

• CAM Interface software

• DTMF cue tone and cue trigger outputs for ad insertion

• Digital Program Mapping providing uplink control for
service replacements in blackout areas

OPTIONAL FEATURES

• MPEGoIP output only available on the digital transport
model

• User-switchable redundant ASI, SDI, or HD-SDI out­puts

• SDI or HD-SDI video output with embedded audio

• AES-3id digital audio output

D9854 Advanced Program Receiver

Specifications Subject To Change Without Notice Rev 10-11 ©Toner Cable Equipment, Inc.

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Parameter Value
System

Standards: MPEG-2/DVB Compatible

EN 300 421, EN 300 468

Demodulation: DVB-S QPSK, DVB-S2 QPSK and 8PSK

Tuner

Number of RF Inputs: 4 (1 active at a time)
Input Level: -25 dBm to -65 dBm per carrier
Frequency Range: 950 MHz to 2150 MHz
Symbol Rate Range: DVB-S: 1.0 to 45 MSymbols/s

DVB-S2: 10.0 to 30 MSymbols/s

1.0 to 10 MSymbols/s

Carrier Capture Range: ≥ ±3.0 MHz (1-10 MSymbols)

≥ ±5.0 MHz (10-30 MSymbols)
Satellites: C-band and Ku-band
Input Impedance: 75 Ω

Analog HD Video Output

Number of Channels: 1
Video Decompression Type: MPEG-2 4:2:0 and MPEG-4 AVC 4:2:0
Video Standard 1080i @29.97, 1080i @ 25,

720p @ 59.94, 720p @ 50
Horizontal Video Resolutions: 1080i: 1920, 1440, 1280

720p: 1280, 960, 640

Analog SD Video Output

Number of Channels: 1
Video Decompression Type: MPEG-2 4:2:0and MPEG-4 AVC 4:2:0
Video Standard: NTSC and PAL B/G/I/D/M/N
Maximum Video Resolution: 720x480/576 digital audio/video output

(future)

Analog Audio Output

Number of Channels: 2 stereo pairs / or 4 mono channels,

5.1 channel down-mix

Audio Decompression: MPEG or Dolby

®

Digital (AC-3). HE-AAC

single stereo pair or Dolby

®

Digital Plus
single stereo pair available in anticipated software
release.

Output Level: Balanced, adjustable audio outputs are

factory set for unity gain (0 dBm out over

600 ohms for 0 dBm in). Output is
adjustable at the front panel by ±6.0 dB
(ref., 100 kilohms) Factory calibrated to
+18 dBu (at full scale).

Frequency Response: ±0.5 dB, 20 Hz, to 20 kHz

(ref. 100 kilohms)
Total Harmonic Distortion: <0.3% at 1 kHz (ref. 100 kilohms)
Dynamic Range 85 dB (CCIR/ARM weighting)
Crosstalk 80 dB at 1 kHz (typical)

Digital Outputs (optional)
Digital HD Video Output

Number of Channels: 1
User Selectable Output Ports: 2
Output Type: BNC
Output Format: HD-SDI, SMPTE-292M

SDI, SMPTE-259M
Embedded Audio: 2 audio programs, PCM or pass-through

2 digital audio outputs (1 stereo ch. each)

BNC, AES-3id, SMPTE 276M

Aspect Ratio

Display Aspect Ratios: 4:3, 16:9
Aspect Ratio Conversions 4:3 : 16:9 Letterbox, 14:9 Letterbox,

Center Cutout
for Down-Conversion: 16:9 : Center Cutout

Aspect Ratio Conversions 4:3 : 16:9 Letterbox, 14:9 Letterbox,

Center Cutout, None

for SD Programs: 16:9 : Scale to 16:9

Parameter Value
VBI

NTSC: Lines 10 to 22 fields 1 and 2

Line 21 closed captions
NABTS, AMOL I and II (Neilsen), VITC,
WSS

PAL: Lines 7 to 22 fields 1 and 2

WST, WSS, VPS, VITC

Data Outputs
RS-232 Asynchronous Data

Rates: 300, 1200, 2400, 4800, 9600, 19,200,

38,400 b/s

Ethernet Output for IP Data

Connector: RJ-45, 10/100BaseT
Rates: Up to 10 Mbps

Conditional Access

PowerVu CA: DES or DVB
DVB Descrambling: BISS Mode 1/E

DVB-CI

Interface: 2 CI Slots - EN 50221
CA Method: Multicrypt, Simulcrypt
CAS: Irdeto, Viaccess, Nagravision, Conax

MediaGuard, Cryptoworks available in an

anticipated future software release

Other Outputs
MPEG-2 Transport Input: EN50083-9, DVB-ASI coaxial,

188/204 byte packets

MPEGoIP

Physical: RJ-45
Ethernet: 10/100/1000BaseT
Output Modes: UDP Raw, RTP
Ethernet Output for RJ-45, 10/100/1000BasteT
Control and Monitoring:

MPEG-2 Transport Output: EN 50083-9, DVB-ASI coaxial,

188 byte packets

Programmable Relay Output: Alarm or configurable to one of the 8

open collector outputs

Cue Tone Output

Balanced Audio Output: -3.0 dBu ±3 dB, 600 ohms
Output Impedance: <50 ohms

Cue Trigger Outputs

Number of Outputs: 8
Type: Open Collector

Environmental Specifications

Operating Temperature: 0°C - 50°C (32°F - 122°F)
Storage: -20°C - 70°C (-4F° - 158°F)

Chassis Mechanical Specifications

Dimensions (WxDxH): 17.35 x 13.78 x 1.72”

44.07 x 35.0 x 4.37 cm

Weight: 10 lbs (4.5 kg) approx.

Power

Voltage Range: 100 V to 240 VAC
Line Frequency: 50/60 Hz
Power Consumption: 37 W max.
LNB Power on Satellite Input: +13 V/+18V @400 mA max.

D9854 Advanced Program Receiver

SPECIFICATIONS