Toner Cable CC125 User Manual

Fiber Optic Tools

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

86 1/2SF Electronic/Kevlar Shears

86 1/2SF is a high leverage tool for cutting, trimming and slicing through fiber and other tough
industrial and electronics materials. Use 86 1/2SF to trim DuPont Kevlar

®

Aramid fibers. Hot­forged, high carbon steel for long life, quick action spring response, and two sharp points. 86
1/2SF has one blade serrated and red cushioned grips.

CC125 Fiber Optic Cleaver

Produces extremely precise cleave lengths from 6.5 mm to 20 mm. Produces endface angles
of less than 2 degrees 100% of the time. Ideal for achieving the precise cleaves required by
the new generation of “no polish” fiber connectors - in either simplex or duplex cables.
Tremendous repeatability - once the cleave length is set and locked, every cleave will be the
same precise length. Steel handles with plastic grips. Anodized aluminum cleaving blocks/fix­turing. Carbide cleaving blade, polyurethane rubber cleaving and gripping pads. Compatible
fibers: glass fibers with 125-micron nominal cladding diameters; accommodates fibers in coat­ed as well as cable form.

86 1/2SF

CC125

FO 103-S Fiber Optic Stripper Line

– For stripping 250 micron buffer coating from 125 micron optical fiber
– Precision diameter hole & V-opening blade allow for accurate buffer coating removal to pre-

vent scratching or nicking of optical fiber

– Available in a variety of stripping fiber diameters

FO 103-S

FO 103-D-J, FO 103-D-250 Dual-Hole Fiber Optic Strippers

– New dual hole models offer the same quality of our standard FO 103-S fiber tool coupled with

a second hole

– FO 103-D-J: Second hole for stripping 2-3 mm fiber jackets and standard 125 micron fiber
– FO 103-D-250: Second hole for stripping 900 micron tight buffer down to 250 micron buffer

coating

FO 103-D-J

NN203

– 22 different patented NO-NIK tools in

sizes ranging from 102 to 1,372
microns

– Accurate to -0 mm, +0.127 mm

NO-NIK Fiber Optic Strippers

Model Handle Color Minimum Stripping Blade Diameter Part Number

(Microns) (Inches)
NN102 Navy 102 μm .004 in 46220
NN127 Silver 127 μm .005 in 46225
NN152 Gold 152 μm .006 in 46231
NN175 Mustard 175 μm .007 in 46235
NN203 Red 203 μm .008 in 46241
NN254 Lt. Blue 254 μm .010 in 46249
NN305 White 305 μm .012 in 46255

Specifications Subject To Change Without Notice Rev 07-11 ©Toner Cable Equipment, Inc.

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Fiber Optic Tools

ACS Armored Cable Slitter

Professional grade tool, ideal for slitting the corrugated copper, steel or aluminum armor layer on
fiber feeder, central tube, stranded loose tube fiber optic cables and other armored cables. Tool
slits outer polyethylene jacket and armor in one operation. Performs longitudinal slitting and cir­cumferential (ringing) for end stripping blade rotates 90° by activating blade lever, allowing easy
mid-span preparation (ringing and slitting). Adjustable from 0.315” (8 mm) to 1.125” (28.6 mm)
cable O.D. Adjustable blade depths to accommodate different cable coverings “roller” style cable
follower provides cable stability and allows for easier tool movement along the cable rugged
anodized aluminum and steel construction.

CS-30-DE Double End Carbide Fiber Scribe

– Reversible carbide blade edged on both ends to double the life of the tool
– 5 mm wide blade wider than conventional scribe blades for greater visibility

CS-30-W Carbide Tip Fiber Optic Scribe

– The CS-30-W is a 30-degree wedge-tip carbide scribe 3.8 mm wide for long life

and simple fiber termination

– Housed in a rugged, anodized aluminum casing 112 mm long and 25 mm in

diameter, the CS-30-W fits comfortably in either hand and in your pocket or tool kit

ACS

CS-30-W

DS-60-C and DS-90-W Diamond-Tip Fiber Optic Scribes

– Quality fiber optic scribes featuring a protective retractable barrel with pocket clip and a

stainless steel mounted diamond tip in your choice of conical or wedge shapes

– These scribes are specially made for the "scratch and pull" technique of scribing optical fiber.

The wedge shape provides a more durable edge.

– The DS-60-C is a 60° Cone Angle-Diamond Tip Retractable Scribe, Part No.: 46137
– The DS-90-W is a 90° Wedge-Diamond Tip Retractable Scribe, Part No.: 46140
– Made in the USA

FO-R12 Fiber Ribbon Access Tool

– Removes outer jackets from 12 count fiber ribbons
– Factory set, requires no adjustment
– Prevents scratching and nicking of optical fibers
– All cutting surfaces are precision formed, hardened, tempered and ground assuring

precise buffer removal

– Tools for other fiber counts available upon request

FOKC: Fiber Optic Kevlar® Cutter

– Designed to cut Kevlar® strength members in fiber optic cables
– Powerful quick cutting action
– Full serrated edge for consistent, fast and clean cuts
– Lightweight and compact
– Return spring designed for precise repeated cuts
– Ergonomic handles with cushioned non-slip grips
– Made of high carbon steel specially treated for long life and trouble free cuts
– Made in the USA

DS-60-C

DS-90-W

FO-R12

FOKC

CS-30-DE