Toner Cable CAT6S User Manual

CAT6S Series
Category 6 Patch Cords, 550 MHz Shielded Network Cable
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
They have a low profile snagless boot for ease of use and protection of the connector latch tab. Compatible with both TIA 586A and 586B wiring con­figurations.
These LAN patch cords are ideal for use in the home or business where a reliable and quality network jumper cable is needed such as cable modems, IP connections, IPTV, digital video or any other ethernet system.
Ordering Information
Model Description Length Options (feet)
CAT6SBK* CAT6 shielded patch cord, black jacket 3, 6, 8, 10, 14 *
CAT6SYL* CAT6 shielded patch cord, yellow jacket 3, 6, 8, 10, 14 *
CAT6SRD* CAT6 shielded patch cord, red jacket 3, 6, 8, 10, 14 *
CAT6SBL* CAT6 shielded patch cord, blue jacket 3, 6, 8, 10, 14 *
CAT6SG7* CAT6 shielded patch cord, grey jacket 3, 6, 8, 10, 14 *
Replace the * in the model with the length, for example: CAT6SRD8 is a red, 8 foot long patch cord.
Specifications Subject To Change Without Notice Rev 12-12 ©Toner Cable Equipment, Inc.
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
Specifications
CAT6S Series
Category 6 Patch Cords, 550 MHz Shielded Network Cable
Applications
Telephony Voice Wiring, Network T Base 10 / 100 / 1000, Digital Video, IPTV, UL Subject 444, EIA / TIA568 & ISO / IEC
11801
Construction
Center Conductor 4 pairs 0.0226” (23 AWG) standed bare copper
Dielectric: 0.0403” PE
Separator Cross: PE
Shield: AL / PE laminated tape
Outer Jacket: 0.248” PVC
Connector: RJ-45
Electrical Characteristics at 20°C
Conductor Resistance (Max): 98.6 Ω / km
Insulation Resistance (Min): 5000 MΩ / km
Capacitance: < pF / m
Impedance: 100 Ω (±15%)
Operating Temperature: -20 to +65°C
• PVC - Polyvinylchloride • AWG - American Wire Gauge • AL / PE - Aluminum / Polyethylene
Loading...