Toner Cable BODA User Manual

Designed with a cast-aluminum housing, the
BODA is ideal for outdoor pedestal as well as
indoor back board installations. The housing uti­lizes a carbonized rubber and wire mesh gasket
to provide excellent protection against RFI and
moisture ingress. 5/8 inch entry fittings in the
housing allow hard line cable to connect directly
to the amplifier. For RG-11 or RG-6 cabling
applications, two KS-F adapters are included to
provide input and output “F” connections. The
amplifier has flexible powering features. For
indoor mounting the supplied external 60 VAC
power supply is connected to the BODA’s auxil­iary power “F” connector using flexible coax.
This feature permits remote powering, so the
amplifier can be installed in a desired location
for optimum performance without a need for an
electrical outlet nearby. Powering can also be
accomplished using 60/90 VAC CATV network
powering. By changing internal jumpers, the
BODA can accept power from its input or output
and either stop or pass power through.

BODA

Broadband Outdoor Distribution Amplifier

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Specifications Subject To Change Without Notice Rev 09-11 ©Toner Cable Equipment, Inc.

Specifications

RF 86A-Forward 86A-Reverse 100A-Forward

Frequency Range: 54-860 MHz 5-42 MHz 54-1000 MHz
Channel Loading: 129 Channels 6 Channels 150 Channels
Gain (Model Dependent): 30/40 dB 20 dB (-4.0 dB Passive) 30 dB
Gain Control Range: 10 dB 10 dB 10 dB
Noise Figure: 9.0 dB 7.0 dB 9.0 dB
Output Level: 36/44 dBmV 48 dBmV 36/44 dBmV
Slope Control Range: 8 dB - 8 dB
Composite Triple Beat (CTB): -62 dB -73 dB -62 dB
Cross Modulation (XMOD): -62 dB -61 dB -61 dB
Composite Second Order (CSO): -61 dB - -61 dB
Hum Modulation: >70 dB > 60 dB > 70 dB
AC Through Current: 6 Amps Max.
Power Requirements: 825 mA @ 40 VAC

550 mA @ 60 VAC
400 mA @ 90 VAC

Temperature: -40 to 60° C

Mechanical

Dimensions: 10 x 7.75 x 3.13 in (L x W x H)

254 x 196.85 x 79.38 mm

Weight: 5.75 lbs Amplifier (2.5 lbs Ext. PS)

2.61 kg

Features

• 860 and 1000 MHz Power Doubling Hybrid Technology

• Cast Aluminum Housing for Outdoor or Indoor Mounting

• 42/54 MHz Split

• -20 dB Directional Coupler Test Points

• Powering Versatility

• Integrated Active Return (defeatable)

• Forward Path Interstage Variable Gain and Slope Controls

• Optional Forward Fixed Equalizer and Attenuator Plug-Ins for
Input Conditioning

• Reverse Path Variable Gain Control with Provision for Optional
Fixed Attenuator

Ordering Information

Model Stock # Description

BODA-86A-30P 5300P83 Broadband Outdoor/Indoor Distribution Amplifier 30 dB, 54-860 MHz, Integrated Active Return (5-42 MHz)
BODA-86A-40P 5300P84 Broadband Outdoor/Indoor Distribution Amplifier 40 dB, 54-860 MHz, Integrated Active Return (5-42 MHz)
BODA-100A-30P 5300P13 Broadband Outdoor/Indoor Distribution Amplifier 30 dB, 54-1000 MHz, Integrated Active Return (5-42 MHz)

Ordering Information

VMI-CEQ8V 9377A Equalizer, Plug-In, 860 MHz, Values 0-20 dB in 1 dB steps
VMI-CEQ1V 9379A Equalizer, Plug-In, 1000 MHz, Values 3, 6, 9, 12, 15, and 18 dB
VMI-AT 9320 Attenuator, Plug-In, Values 0-18 dB in 1 dB steps