©Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.
Telephone: Nationwide: Fax: E-mail: Internet:
IdEA/onics EAS AV-70 Junior
215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com
Specifications for Idea/onics EAS AV-70 Junior
• AV-70 Jr. Audio and video on all channels 2 through 70 (505+ MHz)
• Audio and video on 70 channels
• Proven design
• Eliminates wiring headend channels for all channel video
• Compatible with All encoder/decoders
• Saw filter design
• Video
Input level: 0.5 to 2 Volts Peak to Peak
Frequency response: ±1 dB, 10-4.2 MHz
Standard: U.S. System NTSC sync negative
Input type: Clamped video, Negative sync
• Audio
Audio carrier level: -16 dB below video carrier
Automatic Gain Control: 30 dB
FM Deviation: ±25 KHz automatic
Input level: 0.3 to 10 Volts Peak to Peak
Frequency stability: ±1 KHz
Frequency response: ±1 dB, 30 Hz to 15 KHz
• Adjustable RF output control up to 40 dB
• Trunk Switch
Insertion loss: .3 dB max.
Return loss: 20 dB min.
Impedance: 75 Ohms
Isolation: 70dB min.
• FCC Offset (±3 KHz in the aeronautical band)
• Channel flatness: 4dB
• Switching power supply for continuous cool operation
• Standard 3 ½" by 19" rackmount
• Full two year warranty
(1) VIDEO IN Video Input from the character generator
(2) VIDEO LEVEL Video input level adjustment
(3) SWITCHED DC Switched DC to control external trunk switches
(4) OUTPUT LEVEL Output adjust of the AV-70 Junior to match the
headend output
(5) AUDIO LEVEL Audio level input adjustment
(6) EAS CONTROLLER Connection to the EAS Encoder/Decoder
(7) RF IN/OUT High isolation trunk switch
(8) POWER AC power input, 120 VDC, 60 Hz