Toner Cable ATP User Manual

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

$73$GYDQFHG2SWLFDO7UDQVSRUW3ODWIRUP

ATP

Advanced Optical Transport Platform

ATP Functional Block Diagram

With years of experience in fiber optics, TDM multiplexing, SONET/SDH, IP transport,
signal processing and Switch Fabrics, Evertz

®

now introduces the next generation in
multi-service platforms. The ATP leverages Evertz®expertise and takes these proven
technologies to new levels, providing an infinitely flexible, fault-tolerant transport platform
consisting of the following:

1) Signal Interfaces provide input and output connections for user video, audio, datacom
and telecom signals, providing multi-port signal aggregation to optimize footprint
density. Signal standard, bandwidth, and bit errors are monitored with information
available for remote monitoring via Evertz

®

VistaLINK®PRO SNMP management

software.

2) Trunk Interfaces connect to the switch fabric and encapsulate signals for transport
on SONET/SDH, IP or dedicated fiber/WDM networks. Any of the Trunk Interfaces
available may be deployed on the network, greatly simplifying network planning and
allowing full utilization of various network types.

3) The Switch Fabric lies between the Signal and Trunk Interface modules and forms
the heart of an ATP node. The Switch Fabric employs a completely non-blocking
architecture to route signals between the user and the network providing full ADD,
DROP and PASS functionality at any node on the network. This gives ATP the ability
to support any conceivable unicast, multicast or broadcast signal requirement. For
applications where the number of Signal Interface and/or Trunk Interface connections
grows to exceed the capacity of the Switch Fabric, additional Switch Fabric modules can
be added for easy scalability.

4) Signal Processing & Conversion modules can be accommodated in the ATP chassis.
Any 7700/7800 series module can be inserted to harness the capabilities of Evertz

®

vast product line, providing nearly unlimited additional functionality for outgoing or
incoming signals, all in one platform. Sample processing/conversion functions include:

ATP System Overview

The most advanced, scalable and flexible media transport platform for professional video, audio and datacom
signal transport applications. A sophisticated Switch Fabric allows for unicast, multicast and broadcast signal
distribution over existing SONET/SDH or IP networks. The platform itself may also comprise the network
elements by direct connection over dedicated fiber or WDM systems. Integration with Evertz

®

full 7700/7800
series product line provides comprehensive signal processing and conversion capabilities - all in one extremely
versatile platform.

• JPEG2000 SD & HD encode/decode

• MPEG SD & HD encode/decode

• Audio Embedding and de-embedding

• Video & audio D/A and A/D

• Up/down/cross conversion

• Dolby encoding, decoding, upmixing
and downmixing

• Audio channel mixing & reassignment

• Frame synchronization

• Closed captioning

• IntelliGain™ inter and intra-program
audio normalization

• Black level, gain, hue and saturation

adjustment

• Video and audio delay

• RF demodulation

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Signal Conversion & Processing Signal Interface Switch Fabric Trunk Interface

10 / 100 / 1000

HD / SD / ASI

HD / SD

NTSC

AES

Audio

T1 / DS3

/ OC3 / OC12

Compression

Analog to Digital

Audio Embedder

Analog to Digital

Ethernet

Video

Audio

Tel c o

1 / 10 GigE

OC3 & 12 / STM 1 & 4

Network

OC48 / STM-16

OC192 / STM-64

ATP

Advanced Optical Transport Platform

ATP Operation, Monitoring and Control

3700FR & 7800FR Chassis

Two chassis are available for the ATP to accommodate large core node and small
access node or customer premise applications. The 3700FR 6RU chassis
accommodates sixteen Evertz 7700/7800 series cards for Signal Interface, Trunk
Interface and Signal Processing/Conversion applications. Dual, redundant Switch
Fabric modules, power supplies and frame controllers can also be used.

The 7800FR 3RU chassis accommodates fifteen 7700/7800 series for Signal Interface,
Trunk Interface and Signal Processing/Conversion. Dual, redundant Switch Fabric
modules and power supplies can also be used.

The ATP employs a redundant, fault tolerant architecture to ensure constant service
availability. Management systems for network configuration, provisioning and
monitoring provide intuitive, user-friendly operation, while increasing network resiliency.

VistaLINK

®

PRO

VistaLINK

®

PRO is Evertz®comprehensive SNMP monitoring and control software tool

suite. The VistaLINK

®

PRO ATP Client provides a graphical user interface for service

scheduling and provisioning with timeline tracking.

A network view is also provided for graphical display of the network with alarming and
drill down capability at any node. Monitoring and control of hardware, signals and
network configuration is also available.

VistaLINK

®

PRO PLUS adds a fully user-configurable graphical environment for user
customization. Starting with Global perspectives, drill down to specific nodes, frames
and modules can be accomplished. Facility block diagrams and intuitive graphical
renditions can be created with images from the VistaLINK

®

media library.

The VistaLINK®PRO software tool suite is a true SNMP monitoring and control package
that goes beyond the ATP to unite Evertz

®

Fiber optics, Satellite RF, IRD, Conversion,

Compression,

Transport Stream Monitoring and Multiviewer product lines under one customizable,
detailed monitoring & control tool for facility wide signal monitoring and real-time
equipment configuration.

Third party equipment support is also provided with Northbound and Southbound
interfaces to allow complete system wide M&C under one unified system.

Redundancy
The ATP provides the capacity for hardware, connection and control redundancy. When
combined with Evertz

®

hitless protection switching technology, seamless failover from

primary to redundant streams is provided for optimum network performance.

3700FR (6RU ATP Chassis)

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Ordering Information

Chassis & Controllers
3700FR 6RU Chassis with Redundant Power Supplies
7800FR 3RU Chassis with Redundant Power Supplies
3700FC 3700FR Frame Controller

Signal Interfaces:

Video

7790VM-8 8xSD-SDI/DVB-ASI Input ports Signal Interface
7790VD-8 8xSD-SDI/DVB-ASI Output ports Signal Interface
7790VM-4-HS 2xHD-SDI or 4xSD-SDI/DVB-ASI or 1xHD-SDI with 3xSD-SDII/DVB-ASI

Input ports Signal Interface

7790VD-4-HS 2xHD-SDI or 4xSD-SDI/DVB-ASI or 1xHD-SDI with 3xSD-SDI/DVB-ASI

Output ports Signal Interface

Audio

7790AESM-8 8xAES Audio Input Signal Interface
7790AESD-8 8xAES Audio Output Signal Interface

Data/Telco

7790GT-8 8xPort 10/100/1000 Ethernet Switch Signal Interface
7790GT-2 Dual Port 10/100/1000 Signal Interface
7790T1-8-DS3-2 T1/E1 and DS3/E3 Signal Interface
7790OC3-4 4xOC3/STM-1 Signal Interface
7790OC12 OC12/STM-4 Signal Interface

Trunk Interfaces

7795ALB-DS3-2 Dual DS3/E3 Trunk Interface
7795ALBA-OC3 OC3/STM-1 Trunk Interface
7795ALBA-OC12 OC12/STM-4 Trunk Interface
7795ALBA-OC48 OC48/STM-16 Trunk Interface
7795ALB-OC192 OC192/STM-64 Trunk Interface
7795ALB-GE 1-Gigabit Ethernet Trunk Interface
7795ALB-10GE 10-Gigabit Ethernet Trunk Interface

Switch Fabric

3700ALR-16x16 48Gb/s ATP Switch Fabric Module
3700ALR-24x24 72Gb/s ATP Switch Fabric Module
3700ALR-48x48 144Gb/s ATP Switch Fabric Module
7800ALR-16x16 48Gb/s ATP Switch Fabric Module

Electrical:
AC Input: Auto ranging, 100  240V AC, 50/60Hz
Maximum Operating Current:

9.5A @ 115V AC nominal,

4.0A @ 220V AC nominal

Power Supply Configuration:

1 Standard, plus 1 optional redundant

Connector: IEC 60320 - 1 per power supply

Physical:
Height: 6RU - 10.5” (266mm)
Width & Depth: 19” (483mm), 14.5” (368mm)
Module Capacity: 16 x 77xx/78xx series slots

6 x 3xxx slots

Weight: Approx. 20lbs. (9kg) with 2 power

supplies, no slots occupied

Specifications

Expansion Options

Evertz®ATP architecture allows for simple expansion beyond a single 3700FR or
7800FR chassis when additional Signal or Trunk interfaces exceed the slot count.

Additional 3700FR or 7800FR chassis can be easily added to increase capacity while
maintaining common and transparent control and monitoring through VistaLINK

®

.

3700FR

6RU ATP Chassis

7800FR

3RU Multiframe which holds up to

15 single modules

$73$GYDQFHG2SWLFDO7UDQVSRUW3ODWIRUP

Specifications Subject To Change Without Notice Rev 01-13 ©Toner Cable Equipment, Inc.